User's Manual

VMVL2.1a Operating Instructions
Visteon Confidential Page 7 of 8
2.3. Initiate Outgoing Call from AG
In order to initiate an outgoing call. An AG needs to be paired to the HF and have an active
Bluetooth link. Follow the steps below in order to place a call in handsfree mode from the
AG
1. Dial desired phone number from the AG
2. AG initiates call and SCO link is established
2.4. Terminate Call
1. Call is HF mode.
2. Press End button on the load board in order to terminate ongoing HF call or
3. Press hang-up button on the AG in order to terminate ongoing HF call
2.5. Accept Incoming call
Press PTT button on HF. Call is now active
2.6. Reject an incoming call
1. If an incoming call is present, press and hold the End button on the HF
2. This rejects the incoming call
2.7. Transfer Call from HF to AG
In order to transfer a handsfree call from HF to AG follow the steps below
1. Call is in handsfree mode
2. Press PTT button and wait for audible beep
3. Release PTT button
4. Say “Transfer Call”
5. Call is transferred from handsfree mode to private mode
2.8. Transfer Call from AG to HF
In order to transfer a private call from AG to HF follow the steps below.
1. Call is in private mode
2. Press PTT button and wait for audible beep
3. Release PTT button
4. Say “Transfer Call”
5. Call is transferred from private mode to handsfree mode
6. Call is in private mode and HF and AG have a Bluetooth connection active