User's Manual

2010 Maxima Nam 1st review copy
NISSAN Voice Recognition allows hands-free
operation of the systems equipped on this ve-
hicle, such as phone and vehicle information.
There are two voice recognition modes of opera-
tion available. They are:
● Standard Mode
● Alternate Command Mode
In Standard Mode (the factory default setting),
commands that are available are always shown
on the display and announced by the system. You
can complete your desired operation by simply
following the prompts given by the system. In this
mode, hands-free operation of Audio Climate
Control and Display is not available through
NISSAN Voice Recognition.
For advanced operation, you can change to an
Alternate Command Mode that enables the op-
eration of the display, audio, and climate control
through NISSAN Voice Recognition. When this
mode is active, an expanded list of commands
can be spoken after pushing the TALK
switch on the steering wheel, and the voice com-
mand menu prompts are turned off.
In Alternate Command Mode the recognition
success rate may be affected because the num-
ber of available commands and the ways of
speaking each command are increased. See
“NISSAN Voice Recognition Alternate Com-
mand Mode” in this section.
To improve the recognition success rate when
Alternate Command Mode is active, try using the
Speaker Adaptation Function available in that
mode. See “Speaker Adaptation Function” later
in this section. Otherwise, it is recommended that
Alternate Command Mode be turned off and
Standard Mode be used for the best recognition
performance.
For the voice commands for the navigation sys-
tem, refer to the Navigation System Owner’s
Manual of your vehicle.
For vehicles in the U.S., the factory default setting
is the Standard Mode. See “Standard Mode” in
this section. For vehicles in Canada, the factory
default setting is the Alternate Command Mode.
See “Alternate Command Mode” in this section.
NISSAN VOICE RECOGNITION
STANDARD MODE
The Standard Mode enables control of naviga-
tion, phone and vehicle information. With this
setting active, commands that are available are
always shown on the display and announced by
the system.
Displaying user guide
If you use the NISSAN Voice Recognition system
for the first time or you do not know how to
operate it, you can display the User Guide for
confirmation.
You can confirm how to use voice commands by
accessing a simplified User Guide, which con-
tains basic instructions and tutorials for several
voice commands.
NISSAN VOICE RECOGNITION
SYSTEM (if so equipped)
4-124 Monitor, climate, audio, phone and voice recognition systems
Z DIFF-MARKED Review Copy— (OLD=2009
Maxima nna Owners Manual 3rd Printing (#180265
Maxima OM (en-us) - ELMO rerun for late DBL
changes to Sect 4 ONLY - not for complete proof)
(Jan-08-2009 14:06:29))
(NEW=2010 Maxima nna Owners Manual 1st Print-
ing (#220162 Maxima OM (en-us) - distill for cck1)
(Apr-13-2009 11:03:34))
2010 Maxima (max)
Owners Manual (owners)—USA_English (nna)
04/13/09—root
X
DRAFT-PROOF REVIEW COPY
Note to reviewers: Please confirm that Canada vehicles default to the
Alternate command mode for Voice Recognition and that US vehicles
default to the Standard command mode for Voice Recognition. Also,
are both modes available for US and Canada, the only difference
being which mode the system defaults to?