uuCustomized Featuresu ■ Customization flow Press the SETTINGS button.
uuCustomized Featuresu Features Vehicle Settings Default Driver Assist System Setup * Forward Collision Warning Distance * ACC Pre-Running Car Detect Beep * ACC Display Speed Unit * Lane Keeping Assist Suspend Beep * Blind Spot Info * Meter Setup Language Selection Adjust Outside Temp.
uuCustomized Featuresu Auto Door Lock Auto Door Unlock Key And Remote Unlock Mode Keyless Lock Answer Back Security Relock Timer Door Setup Power Tailgate Setup IDS Setup Power Tailgate Keyless Open Mode Power Tailgate Open by Outer Handle Preferred IDS Mode Camera Settings Maintenance Reset Fixed Guideline Dynamic Guideline Features Maintenance Info.
uuCustomized Featuresu Phone Connect phone Bluetooth Device List Disconnect Edit Bluetooth Device Add Bluetooth Device Phone Settings Edit Speed Dial Auto Transfer Features Auto Answer Ring Tone Automatic Phone Sync Default Use Contact Photo Text/Email Info Settings Default 252 Add Bluetooth Device Enable Text/Email Select Account New Text/Email Alert Clock Clock/Wallpaper Type Clock Adjustment Clock Format Others Info Screen Preference
uuCustomized Featuresu ■ List of customizable options Setup Group System Settings Customizable Features Description Selectable Settings Sync Display Brightness Selects whether the display brightness synchronizes with the instrument panel brightness. Brightness Changes the brightness of the audio/information screen. — Contrast Changes the contrast of the audio/information screen. — Black Level Changes the black level of the audio/information screen.
uuCustomized Featuresu Setup Group Customizable Features Bluetooth Bluetooth Status Turns the Bluetooth® on and off. Bluetooth Device List Pairs a new phone to HFL, edits and deletes a paired phone, and creates a security PIN. Selectable Settings On*1/Off — 2 Phone Setup P. 274 Edit Pairing Code Features Voice Recog Description Voice Prompt System Settings Clock Clock/ Wallpaper Type Clock Changes a pairing code. 2 To change the pairing code setting P.
uuCustomized Featuresu Setup Group Customizable Features Others System Settings Selectable Settings Changes the display language. English*1/Français/ Español Display Operation Restriction Tips Alerts you when manual control of the system is disabled to prevent distraction while driving. On*1/Off Background Color Changes the background color of the audio/ information screen and the On Demand MultiUse DisplayTM.
uuCustomized Featuresu Setup Group Vehicle Settings Customizable Features Driver Assist System Setup * Selectable Settings Features Forward Collision Warning Distance * Changes at which distance FCW * or CMBSTM* alerts, or turns FCW * on and off. Long/Normal*1/ Short/Off ACC Forward Vehicle Detect Beep * Causes the system to beep when the system detects a vehicle, or when the vehicle goes out of the ACC with LSF range.
uuCustomized Featuresu Setup Group Customizable Features Description Selectable Settings English*1/Français/ Español Language Selection Changes the displayed language on the multiinformation display. Adjust Outside Temp. Display Adjust the temperature reading by a few degrees. “Trip A” Reset Timing Changes the setting of how to reset trip meter A, average fuel economy A, average speed A, and elapsed time A.
uuCustomized Featuresu Setup Group Customizable Features Lighting Setup Features Vehicle Settings Driving Position Setup Selectable Settings Interior Light Dimming Time Changes the length of time the interior lights stay on after you close the doors. 60seconds/ 30seconds*1/ 15seconds Headlight Auto Off Timer Changes the length of time the exterior lights stay on after you close the driver’s door.
uuCustomized Featuresu Setup Group Customizable Features Selectable Settings With Vehicle Speed*1/Shift from P/ Off Auto Door Unlock Changes the setting for when the doors unlock automatically. All Doors When Driver’s Door Opens*1/All Doors When Shifted to Park/All Doors When Ignition Switched Off/Off Key And Remote Unlock Mode Sets up either the driver’s door or all doors to unlock on the first push of the remote or built-in key.
uuCustomized Featuresu Setup Group Customizable Features Changes the keyless setting for when the power tailgate opens. Anytime*1/When Unlocked Power Tailgate Open by Outer Handle Selects whether to enable the power tailgate open operation using the tailgate outer handle. Off (Manual Only)/ On (Power/ Manual)*1 IDS Setup Preferred IDS Mode Changes the IDS mode setting for when you set the power mode to ON. Last Used*1/Comfort/ Normal/Sport Maintenance Info.
uuCustomized Featuresu Setup Group Customizable Features Sound Source Select Popup CD (MP3/WMA/AAC), iPod®, USB, Pandora® * or AhaTM mode Adjusts the settings of the audio speaker’s sound. 2 Adjusting the Sound P. 215 Selectable Settings -6 ~ C*1 ~ +6 (Bass, Treble and Subwoofer), -9 ~ C*1 ~ +9 (Fader, Balance), Off/Low/Mid*1/High (SVC) Selects whether the list of selectable audio sources comes on when the AUDIO button is pressed. On/Off*1 Turns on and off the cover art display.
uuCustomized Featuresu Setup Group Customizable Features Connect phone Description Pairs a new phone to HFL, or connects or disconnects a paired phone. Selectable Settings — 2 Phone Setup P. 274 Phone Settings Phone Bluetooth Device List Pairs a new phone to HFL, edits or deletes a paired phone, or creates a security PIN. — 2 Phone Setup P. 274 Edit Speed Dial Features 262 *1:Default Setting Edits, adds or deletes a speed dial entry. 2 Phone Setup P.
uuCustomized Featuresu Setup Group Customizable Features Phone Text/ Email Default Selectable Settings Auto Transfer Sets calls to automatically transfer from your phone to HFL when you enter the vehicle. On*1/Off Auto Answer Sets whether to automatically answer an incoming call after about four seconds. On/Off*1 Ring Tone Selects the ring tone. Fixed/Mobile Phone*1/Off Automatic Phone Sync Sets a phonebook data to be automatically imported when a phone is paired to HFL.
uuCustomized Featuresu Setup Group Customizable Features Clock Clock/ Wallpaper Type Description Selectable Settings Clock Wallpaper See System Settings on P. 253 to P. 255. Clock Adjustment Clock Format Info Settings Features Other Default *1:Default Setting 264 Info Screen Preference Selects either of the following to be displayed when you press the INFO button. • Info Top: Some of the available menu items pop up. • Info Menu: All available menu items pop up.
uuCustomized FeaturesuDefaulting All the Settings Defaulting All the Settings 1Defaulting All the Settings When you transfer the vehicle to a third party, reset all settings to default and delete all personal data. Features You can reset all the menu and customized settings as the factory defaults. 1. Press the SETTINGS button. 2. Rotate to select System Settings, then press . 3. Rotate to select Factory Data Reset, then press . u The pop-up menu appears on the screen. 4.
HomeLink® Universal Transceiver The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems. ■ Important Safety Precautions Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.
uuHomeLink® Universal TransceiveruTraining HomeLink ■ Training a Button 1Training HomeLink 1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the HomeLink button you want to program. 2. Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink after 10 secs? NO YES Retraining a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory.
Bluetooth® HandsFreeLink® Models with navigation system 1Bluetooth® HandsFreeLink® See Navigation System Manual for how to operate Bluetooth® HandsFreeLink®. Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s audio system, without handling your cell phone. Using HFL ■ HFL Buttons To use HFL, the Bluetooth setting must be On. 2 Customized Features P.
uuBluetooth® HandsFreeLink®uUsing HFL ■ HFL Status Display 1Bluetooth® HandsFreeLink® The audio/information screen notifies you when there is an incoming call. Bluetooth® Indicator Battery Level Status Comes on when your phone is connected to HFL. Roam Status HFL Mode Signal Strength Caller’s Name Caller’s Number Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd.
uuBluetooth® HandsFreeLink®uHFL Menus HFL Menus The power mode must be in ACCESSORY or ON to use HFL. 1HFL Menus ■ Phone Settings screen 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . To use HFL, you must first pair your Bluetoothcompatible cell phone to the system while the vehicle is parked. Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.
uuBluetooth® HandsFreeLink®uHFL Menus Delete All Delete all the previously stored speed dial numbers. Manual Input Enter a phone number to store as a speed dial number. Edit Speed Dial New Entry Import from Select a phone number from the call Call History history to store as a speed dial number. Import from Select a phone number from the Phonebook phonebook to store as a speed dial number.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Phone screen 1. Press the PHONE button. 2. Press the MENU button to display the menu items. Dial*1 Features Phonebook*1 Enter a phone number to dial. Display the paired phone’s phonebook. Manual Input New Entry Import from Phonebook Speed Dial*1 Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.
uuBluetooth® HandsFreeLink®uHFL Menus Redial*1 Redial the last number dialed in the phone’s history. All Call History*1 Dialed Received Missed Display the last 20 outgoing, incoming and missed calls. Display the last 20 outgoing calls. Display the last 20 incoming calls. Display the last 20 missed calls. (Read/Stop) Select a message and press . Text/Email*1 Previous See the previous message. Next See the next message. Reply Reply to a received message using one of six fixed phrases.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Phone Setup 1Phone Setup ■ To pair a cell phone (when there is no Features 274 phone paired to the system) 1. Press the PHONE button. 2. Rotate to select Yes, then press . 3. Make sure your phone is search or discoverable mode, then press . u HFL automatically searches for a Bluetooth device. 4. When your phone appears on the list, select it by pressing . u If your phone does not appear, you can select Refresh to search again.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To pair a cell phone (when a phone has Continued Features already been paired to the system) 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Connect phone, then Add Bluetooth Device. 3. Make sure your phone is in search or discoverable mode, then press . u HFL automatically searches for a Bluetooth device. 4. When your phone appears on the list, select it by pressing .
uuBluetooth® HandsFreeLink®uHFL Menus ■ To change the pairing code setting 1. Press the SETTINGS button. 2. Rotate to select System Settings, then press . u Repeat the procedure to select Edit Pairing Code. 3. Rotate to select Fixed or Random, then press . 1To change the pairing code setting The pairing code may be six or four digits depending on your phone. The default pairing code is 0000 until you change the setting. To create your own, select Fixed, and delete the current code, then enter a new one.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To replace an already-paired phone Continued 1To replace an already-paired phone with a new phone The replaced phone will keep the same speed dial entries, and security PIN information from the previously paired phone. Features with a new phone 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Bluetooth Device List. 3. Rotate to select a paired phone you want to replace, then press . 4.
uuBluetooth® HandsFreeLink®uHFL Menus Features 278 ■ To delete a paired phone 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Bluetooth Device List. 3. Rotate to select a phone you want to delete, then press . 4. Rotate to select Delete This Device, then press . 5. You will receive a confirmation message on the screen. Rotate to select Yes, then press . 6. You will receive a notification on the screen if it is successful.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To Set Up a Text Message/E-mail Options ■ To turn on or off the text/E-mail function 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Enable Text/Email. u A pop-up menu appears on the screen. 3. Rotate to select On or Off, then press . 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select New Text/Email Alert.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To Create a Security PIN 1To Create a Security PIN You can protect each of the six cell phones with a security PIN. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Bluetooth Device List. 3. Rotate to select a phone you want to add a security PIN to, then press . 4. Rotate to select Edit PIN, then press . 5. Enter a new four-digit number.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Editing User Name u Audio/information screen Rotate to select, then press . Move to delete. Rotate or move to select OK then press to enter the name. On Demand Multi-Use DisplayTM Features Audio/information screen Edit the user name of a paired phone as follows: 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Bluetooth Device List. 3. Rotate to select a phone you want to edit, then press . 4.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Automatic Transferring If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Auto Transfer. 3. Rotate to select On, then press . Features ■ Auto Answer You can set HFL to automatically answer an incoming call in four seconds. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press .
uuBluetooth® HandsFreeLink®uHFL Menus ■ Ring Tone 1Ring Tone You can change the ring tone setting. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Ring Tone. 3. Rotate to select Fixed, Mobile Phone or Off, then press . 1Use Contact Photo You can display a caller’s picture on an incoming call screen. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then Phone settings press .
uuBluetooth® HandsFreeLink®uHFL Menus ■ Automatic Import of Cellular Phonebook and Call History ■ When Automatic Phone Sync is set to On: When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL. ■ Changing the Automatic Phone Sync Features 284 setting 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Automatic Phone Sync. 3. Rotate to select On or Off, then press .
uuBluetooth® HandsFreeLink®uHFL Menus ■ Speed Dial 1Speed Dial Continued When a voice tag is stored, press the button to call the number using the voice tag. Say “Call” and the voice tag name. Features Up to 20 speed dial numbers can be stored per phone. To store a speed dial number: 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Speed Dial, then press . u Repeat the procedure to select New Entry. 4. Rotate to select a place to choose a number from, then press .
uuBluetooth® HandsFreeLink®uHFL Menus ■ To add a voice tag to a stored speed Features 286 dial number 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, rotate to select Edit, then press . 4. Rotate to select Voice Tag, then press . u From the pop-up menu, rotate to select Record, then press . 5. Using the button, follow the prompts to complete the voice tag.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To delete a voice tag Features 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Edit Speed Dial. 3. Select an existing speed dial entry. u From the pop-up menu, rotate to select Edit, then press . 4. Rotate to select Voice Tag, then press . u From the pop-up menu, rotate to select Clear, then press . 5. You will receive a confirmation message on the screen. Rotate to select Yes, then press .
uuBluetooth® HandsFreeLink®uHFL Menus ■ Making a Call 1Making a Call You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial. Any voice-tagged speed dial entry, phonebook name, or number can be dialed by voice from most screens. Press the button and say “Call” and the voice tag name, “Call by name” and the phonebook name, or “Call” and the phone number. The maximum range between your phone and vehicles is 30 feet (10 meters).
uuBluetooth® HandsFreeLink®uHFL Menus ■ To make a call using the imported Continued 1To make a call using the imported phonebook This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number, phonebook name, or number using voice commands. 2 Limitations for Manual Operation P. 269 2 Speed Dial P. 285 You can use the keyboard on the On Demand MultiUse DisplayTM for an alphabetical search. Features phonebook 1. Press the PHONE button. 2.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To make a call using a phone number 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Dial, then press . 4. Rotate to select a number, then press . 5. Rotate to select , then press . u Dialing starts automatically. Features 290 ■ To make a call using redial 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Redial, then press u Dialing starts automatically.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To make a call using the call history Call history is stored by All, Dialed, Received, and Missed. 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Call History, then press . 4. Move or to select All, Dialed, Received, and Missed. 5. Rotate to select a number, then press . u Dialing starts automatically. Mr.AAA 111AAA#### Mr.BBB 1. Press the button. 2. Shift the left selector wheel right to select Call History. 3.
uuBluetooth® HandsFreeLink®uHFL Menus ■ To make a call using a speed dial entry 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Speed Dial, then press . 4. Rotate to select a number, then press . u Dialing starts automatically. Steering switches On MID Features Mr.AAA 111AAA#### Mr.BBB 292 1. Press the button. 2. Shift the left selector wheel left to select Speed Dial. 3. Roll the left selector wheel to select a number. 4. Push the left selector wheel or the button.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Receiving a Call 1Receiving a Call When there is an incoming call, an audible notification sounds (if activated) and the Incoming call screen appears. Press the Press the button to answer the call. button to decline or end the call. Call Waiting Press the button to put the current call on hold to answer the incoming call. Press the button again to return to the current call. Ignore the incoming call if you do not want to answer it.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Options During a Call Features 294 The following options are available during a call. Mute: Mute your voice. Transfer: Transfer a call from HFL to your phone. Touch Tones: Send numbers during a call. This is useful when you call a menudriven phone system. The available options are shown on the Phone Mute Icon screen. Rotate to select one of the available options, then press . uThe mute icon appears when Mute is selected. Select Mute again to turn it off.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Receiving a Text Message/E-mail 1Receiving a Text Message/E-mail Continued The system does not display any received messages while you are driving. You can only hear them read aloud. With some phones, you may be able to display up to 20 most recent text messages and E-mails. State or local laws may limit your use of the HFL text message/E-mail feature. Only use the text message/ E-mail feature when conditions allow you to do so safely.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Selecting a Mail Account If a paired phone has text message or mail accounts, you can select one of them to be active and receive notifications. 1. Press the SETTINGS button. 2. Rotate to select Phone Settings, then press . u Repeat the procedure to select Select Account. 3. Rotate to select Text Messages or an E-mail account you want, then press . 1Selecting a Mail Account You can also select a mail account from the folder list screen or the message list screen.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Displaying Messages Message List ■ Displaying text messages The 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Text/Email, then press . u Select account if necessary. 4. Rotate to select a message, then press . u The text message is displayed. The system automatically starts reading the message aloud. If you delete a message on the phone, the message is also deleted in the system.
uuBluetooth® HandsFreeLink®uHFL Menus Folder List Message List Features E-mail 298 ■ Displaying E-mails 1. Press the PHONE button. 2. Press the MENU button. 3. Rotate to select Text/Email, then press . 4. Rotate to select a folder, then press . 5. Rotate to select a message, then press . u The E-mail is displayed. The system automatically starts reading the message aloud. 1Displaying E-mails Received text messages and E-mails may appear in the message list screen at the same time.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Read or stop reading a message 1. Go to the text message or E-mail screen. u The system automatically starts reading the message aloud. 2 Displaying Messages P. 297 2. Press to stop reading. Press again to start reading the message from the beginning. ■ Reply to a message 1Reply to a message 2 Displaying Messages P. 297 2. Move and rotate to select Reply, then press . 3. Rotate to select the reply message, then press . u The pop-up menu appears on the screen. 4.
uuBluetooth® HandsFreeLink®uHFL Menus ■ Making a call to a sender 1. Go to the text message screen. u The system automatically starts reading the message aloud. John 0123456789#### Reply Features 300 2 Displaying text messages P. 297 Call 2. Move press and rotate .
Compass * When you set the power mode to ON, the compass self-calibrates, and the compass display appears.
uuCompass * uCompass Zone Selection Compass Zone Selection 1. Set the power mode to ON. 2. On the top screen of any audio source, press and hold for five seconds. uThe display switches to the Compass settings screen. 3. Rotate to select Zone Adjust, then press . uThe display shows the current zone number the system is set to. 4. To change the zone, rotate to select the zone number of your area (See Zone Map), then press .
Driving This chapter discusses driving, refueling, and information on items such as accessories. Before Driving Driving Preparation .......................... 304 Maximum Load Limit........................ 307 Towing a Trailer................................ 309 Off-Highway Driving Guidelines ..... 320 When Driving Starting the Engine .......................... 322 Precautions While Driving................. 327 Automatic Transmission ................... 328 Shifting ........................................
Before Driving Driving Preparation Check the following items before you start driving. ■ Exterior Checks • Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. u Remove any frost, snow, or ice. u Remove any snow on the roof, as this can slip down and obstruct your field of vision while driving. If frozen solid, remove ice once it has softened. u When removing ice from around the wheels, be sure not to damage the wheel or wheel components.
uuBefore DrivinguDriving Preparation ■ Interior Checks 1Interior Checks • Store or secure all items on board properly. u Carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. 2 Maximum Load Limit P. 307 2 Locking/Unlocking the Doors from the Inside P. 124 • Adjust your seating position properly. u Adjust the head restraint, too. Driving • Do not pile items higher than the seat height.
uuBefore DrivinguDriving Preparation • Be sure items placed on the floor behind the front seats cannot roll under the seats. u They can interfere with the driver’s ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats. • Everyone in the vehicle must fasten their seat belt. 2 Fastening a Seat Belt P. 34 • Make sure that the indicators in the instrument panel come on when you start the vehicle, and go off soon after.
uuBefore DrivinguMaximum Load Limit Maximum Load Limit The maximum load for your vehicle is 1,173 lbs (532 kg). See Tire and Loading Information label attached to the driver’s doorjamb. 1Maximum Load Limit 3 WARNING Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. Label Example Follow all load limits and other loading guidelines in this manual.
uuBefore DrivinguMaximum Load Limit (5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
Towing a Trailer Towing Preparation ■ Towing Load Limits 1Towing Load Limits Your vehicle can tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the towing guidelines. Check the load limits before driving. ■ Total trailer weight Do not exceed the maximum allowable weight of the trailer, cargo, and everything in or on it shown in the table. Towing loads in excess of this can seriously affect vehicle handling and performance and can damage the engine and drivetrain.
uuTowing a TraileruTowing Preparation ■ Tongue load The weight of the tongue with a fully loaded trailer on the hitch should be approximately: Boat trailers: 5 – 15% of the total trailer weight Other trailers: 10 – 15% of total trailer weight Tongue Load Load Tongue Driving 310 Number of occupants 2 3 4 5 6 7 4WD models 2WD models 500 lbs (227 kg) 350 lbs (159 kg) 475 lbs (215 kg) 325 lbs (147 kg) 380 lbs (172 kg) 300 lbs (136 kg) 290 lbs (132 kg) 275 lbs (125 kg) 165 lbs (75 kg) 150 lbs (68 kg) Towi
uuTowing a TraileruTowing Preparation ■ To estimate the tongue load Excessive tongue load reduces front tire traction and steering control. Too little tongue load can make the trailer unstable and cause it to sway. You can estimate the tongue load by measuring the trailer hitch height from the ground in the following steps: 1. Park the vehicle on level ground. 2. Measure the distance between the ground and the bottom of the trailer hitch. 3. Connect the fully loaded trailer to the hitch. 4.
uuTowing a TraileruTowing Preparation ■ How to weigh the trailer loads using the public scale Check each weight in the order indicated as shown. Refer to the table on the right for each weight’s limit except for the tongue load. 2 Tongue load P. 310 1. Front gross axle weight. 4. Gross combined weight. 2. Gross vehicle weight. 3. Rear gross axle weight. Driving 312 5. Hitched trailer weight. 6. Unhitched trailer weight. • If you cannot weigh the rear axle, subtract 1 from 2.
uuTowing a TraileruTowing Preparation ■ Towing Equipment and Accessories 1Towing Equipment and Accessories Towing generally requires a variety of supplemental equipment. To ensure the best quality, we recommend that you purchase Acura equipment whenever possible. Make sure that all equipment is properly installed and maintained, and that it meets federal, state, province/ territory, and local regulations. Consult your trailer maker for proper installation and setup of the equipment.
uuTowing a TraileruTowing Preparation ■ Trailer brakes 1Trailer brakes Recommended for any trailer with a total weight of 1,000 lbs (450 kg) or more: There are two common types of trailer brakes: surge and electric. Surge brakes are common for boat trailers, since the brakes will get wet. If you choose electric brakes, be sure they are electronically actuated. Do not attempt to attach trailer brakes to your vehicle’s hydraulic system, as it will lower braking effectiveness and create a potential hazard.
uuTowing a TraileruTowing Preparation ■ Trailer light 1Trailer light Trailer lights and equipment must comply with federal, state, province/territory, and local regulations. Check with your local trailer sales or rental agency for the requirements in the area where you plan to tow. Pins’ wiring color codes and their purposes: +B Trailer Charge +B Trailer Back Light Right Turn Signal +B Trailer Hazard Light The trailer lighting connector is located behind the left side panel in the cargo area.
uuTowing a TraileruTowing Preparation ■ Hitches Read the trailer manufacturer’s instructions, and select the appropriate draw bar for the height of the trailer you will be towing. ■ Weight distribution hitches Your vehicle is designed to tow without the need for a load distributing hitch. If you wish to use one, please consult your trailer maker for proper installation and set-up. Improper set-up could degrade the handling, stability, and braking performance of your vehicle.
uuTowing a TraileruTrailer Stability Assist * Trailer Stability Assist * Helps to stabilize the vehicle and trailer when the trailer severely sways. ■ How trailer stability assist works When the vehicle and trailer become unstable while driving, trailer stability assist determines the cause. If the trailer oscillation is detected as the cause, and the swaying increases, the system applies the brakes or controls engine output to reduce vehicle speed.
uuTowing a TraileruDriving Safely with a Trailer Driving Safely with a Trailer ■ Things You Need To Know Before Towing a Trailer • Have the trailer properly serviced and keep it in good condition. • Make sure that all the weights and load in the vehicle and trailer are within limits. 1Driving Safely with a Trailer Parking In addition to the normal precautions, place wheel chocks at each of the trailer’s tires. 2 Towing Load Limits P.
uuTowing a TraileruTowing Your Vehicle ■ Driving in Hilly Terrain • Monitor your temperature gauge. If it nears the red (Hot) mark, turn off the climate control system and reduce speed. Pull to the side of the road safely to cool down the engine if necessary. • Shift to the (S position if the transmission shifts frequently. ■ Retrieving a Boat If the vehicle tires slip when retrieving a boat from the water, keep the transmission in (D and do not use the sequential shift mode in (S .
Off-Highway Driving Guidelines General Information Your vehicle has been designed primarily for use on pavement, however, its higher ground clearance allows you to occasionally travel on unpaved roads. It is not designed for trail-blazing, or other challenging off-road activities. If you decide to drive on unpaved roads, you will find that it requires somewhat different driving skills and that your vehicle will handle somewhat differently than it does on pavement.
uuOff-Highway Driving GuidelinesuAvoiding Trouble Avoiding Trouble Driving • Check Out Your Vehicle before you leave the pavement and make sure that all scheduled maintenance has been completed. Pay special attention to the condition of the tires, and check the tire pressures. • Remember the route you choose presents limits (too steep or bumpy), you have limits (driving skill and comfort), and your vehicle has limits (traction, stability, and power).
When Driving Starting the Engine 1. Make sure the parking brake is applied. 1Starting the Engine Keep your foot firmly on the brake pedal when starting the engine. The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters). When starting the engine in cold weather, turn off all electrical accessories such as the lights, climate control system, and rear defogger in order to reduce battery drain. 2.
uuWhen DrivinguStarting the Engine ■ Stopping the Engine 1Starting the Engine You can turn the engine off when the vehicle is completely stopped. 1. Shift to (P . 2. Press the ENGINE START/STOP button with your foot on the brake pedal. The immobilizer system protects your vehicle from theft. If an improperly coded device is used, the engine’s fuel system is disabled. 2 Immobilizer System P.
uuWhen DrivinguStarting the Engine ■ Remote Engine Start with Vehicle Feedback * You can remotely start the engine using the two-way keyless access remote from distances up to 328 feet (100 meters) from the vehicle. ■ To start the engine With the doors locked, Press the button, then press and hold the button. Go within the range, and try again. Amber LED: Blinks when any button is pressed. Continues to blink during a vehicle self check until the engine starts.
uuWhen DrivinguStarting the Engine ■ To stop the engine Press and hold the for one second. Amber LED: Blinks when any button is pressed. 1Remote Engine Start with Vehicle Feedback * button Red LED: ● Comes on for one second to let you know that the engine has stopped. ● Before starting the engine, make sure to check the door lock status using the remote. When you press the button, wait for the green LED to blink.
uuWhen DrivinguStarting the Engine ■ Starting to Drive When the engine was started using the two-way keyless access remote * 1. Depress the brake pedal and press the ENGINE START/STOP button simultaneously. When the engine was started in any case 1Starting to Drive When the engine was started using the two-way keyless access remote * The engine stops when the shift lever is moved out of (P before the ENGINE START/STOP button is pressed. Follow the step 1 when starting to drive. 2.
uuWhen DrivinguPrecautions While Driving Precautions While Driving ■ Driving Guidelines for Your Utility Vehicle Utility vehicles have a significantly higher rollover rate than other types of vehicles. To prevent rollovers or loss of control: • Take corners at slower speeds than you would with a passenger vehicle. • Avoid sharp turns and abrupt maneuvers whenever possible. • Do not modify your vehicle in any way that you would raise the center of gravity. • Do not carry heavy cargo on the roof.
uuWhen DrivinguAutomatic Transmission Automatic Transmission ■ Creeping The engine runs at a higher idle speed and creeping increases. Keep the brake pedal firmly depressed when stopped. ■ Kickdown Quickly depressing the accelerator pedal while driving uphill may cause the transmission to drop to a lower gear, unexpectedly increasing vehicle speed. Depress the accelerator pedal carefully, especially on slippery roads and curves.
uuWhen DrivinguShifting Shifting Change the shift position in accordance with your driving needs. 1Shifting You cannot change the power mode from ON to VEHICLE OFF (LOCK) unless the shift lever is in (P . ■ Shift lever positions Park Used when parking or starting the engine Release Button The vehicle may move forward very slightly even in (N while the engine is cold. Depress the brake pedal firmly and, when necessary, apply the parking brake.
uuWhen DrivinguShifting ■ Shift Lever Operation 1Shift Lever Operation NOTICE Tachometer’s red zone Shift Lever Position Indicator M (Sequential Shift mode) Indicator/ Gear Position Indicator When you change the shift lever from (D to (R and vice versa, come to a complete stop and keep the brake pedal depressed. Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.
uuWhen DrivinguShifting ■ Sequential Shift Mode Use the paddle shifters to change between 1st and 6th gears without removing your hands from the steering wheel. The transmission will switch to the sequential shift mode. ■ When the shift lever is in (D : The vehicle will go into the sequential shift mode momentarily, and the gear position indicator will come on.
uuWhen DrivinguShifting ■ Second gear lock mode If you pull the (+ paddle shifter while stopped or driving at 6 mph (10 km/h) or less, the gear position will be locked in 2nd gear. This makes it easier to pull away on slippery surfaces such as snow covered roads. To cancel the 2nd gear lock mode, pull the (- paddle shifter, or move the shift lever from (S to (D .
uuWhen DrivinguIntegrated Dynamics System (IDS) Integrated Dynamics System (IDS) Modifies the dynamic character of the vehicle. There are three IDS modes to select from: Comfort, Normal, and Sport. Press the IDS button to select a mode. The mode you have selected appears on the MID. You can customize the IDS mode default setting using the MID. 2 Customized Features P. 104 Comfort Maximizes driver comfort through increased steering assist.
uuWhen DrivinguCruise Control Cruise Control Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration. Desired speed in a range above roughly 25 mph (40 km/h) ~ Always keep sufficient distance between you and the vehicle in front of you. ■ Shift positions for cruise control: Driving 334 ■ Press the CRUISE button on the steering wheel.
uuWhen DrivinguCruise Control ■ To Set the Vehicle Speed On RES/+/SET/− Switch Press down and release On when cruise control begins Take your foot off the pedal and press the RES/+/SET/– switch down when you reach the desired speed. Continued Driving The moment you release the RES/+/SET/– switch, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
uuWhen DrivinguCruise Control ■ To Adjust the Vehicle Speed 1To Adjust the Vehicle Speed Increase or decrease the vehicle speed using the RES/+/SET/– switch on the steering wheel. You can set the vehicle speed pressing the RES/+/ SET/– switch down on the steering wheel when adjusting the speed with the accelerator and brake pedals. To increase speed To decrease speed Driving • Each time you press the switch up or down, the vehicle speed is increased or decreased by about 1 mph or 1 km/h accordingly.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)* Helps maintain a constant vehicle speed and a set following distance behind a vehicle detected ahead of yours and, if the detected vehicle comes to a stop, decelerates and stops your vehicle, without you having to keep your foot on the brake or the accelerator. When to use The radar sensor is in the front grille.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ To Set the Vehicle Speed 1Adaptive Cruise Control (ACC) with Low Speed Follow (LSF) * RES/+/SET/− Switch On when ACC with LSF begins Driving When driving at 25 mph (40 km/h) or above: Take your foot off the pedal and press down the RES/+/SET/– switch when you reach the desired speed. The moment you release the switch, the set speed is fixed, and ACC with LSF begins.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ When in Operation 1When in Operation ■ There is a vehicle ahead ACC with LSF monitors if a vehicle ahead of you enters the ACC with LSF range. If it does, the ACC with LSF system maintains or decelerates your vehicle’s set speed in order to keep the vehicle’s set following distance from the vehicle ahead. 2 To Set or Change Following Distance P.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ There is no vehicle ahead A vehicle icon with dotted-line contour appears on the MID 1When in Operation When driving at 22 mph (35 km/h) or above: Your vehicle maintains the set speed without having to keep your foot on the brake or accelerator pedal.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ To Adjust the Vehicle Speed 1To Adjust the Vehicle Speed Increase or decrease the vehicle speed using the RES/+/SET/– switch on the steering wheel. If a vehicle detected ahead is going at a speed slower than your increased set speed, ACC with LSF may not accelerate your vehicle. This is to maintain the set distance between your vehicle and the vehicle ahead.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ To Set or Change Following Distance Press the (distance) button to change the ACC with LSF following distance. Each time you press the button, the following distance (the distance behind a vehicle detected ahead of you) setting cycles through short, middle, long, and extra long following distances. Distance Button The higher your selected set speed is, the longer the short, middle, long or extra long following distance becomes.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ To Cancel MAIN Button CANCEL Button 1To Cancel To cancel ACC with LSF, do any of the following: • Press the CANCEL button. • Press the MAIN button. uACC with LSF indicator goes off. • Depress the brake pedal. uWhen the LSF function has stopped the vehicle, you cannot cancel ACC with LSF by depressing the brake pedal.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ Automatic cancellation Driving The beeper sounds and a message appears on the MID when ACC with LSF is automatically canceled. Any of these conditions may cause the ACC with LSF to automatically cancel: • Your vehicle speed slows to 22 mph (35 km/h) or below when a detected vehicle goes out of the ACC with LSF range. • Bad weather (rain, fog, snow, etc.) • When the radar sensor in the front grille gets dirty.
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF) * ■ To Switch ACC with LSF to Cruise Control Press and hold the 1To Switch ACC with LSF to Cruise Control Always be aware which mode you are in. When you are driving in Cruise mode, be more cautious about keeping a safe distance from a vehicle ahead of you. (distance) button for one second. Cruise Mode Selected appears on the MID for two seconds, and then the mode switches to Cruise.
uuWhen DrivinguForward Collision Warning (FCW) * Forward Collision Warning (FCW) * Alerts you when it detects the possibility of your vehicle colliding with the vehicle in front of yours. If the system determines a collision is possible, it gives both visual and audible alerts. uTake appropriate action to prevent a collision (apply the brakes, change lanes, etc.). ■ How the system works The system may give warnings of potential collisions when your vehicle speed is above 10 mph (15 km/h).
uuWhen DrivinguForward Collision Warning (FCW) * 1Forward Collision Warning (FCW) * The camera is located behind the rearview mirror. Never apply a film or attach any objects to the windshield that could obstruct the FCW camera’s field of vision. Scratches, nicks, and other damage to the windshield within the FCW camera’s field of vision can cause the system to operate abnormally. If this occurs, we recommend that you replace the windshield with a genuine Acura replacement windshield.
uuWhen DrivinguForward Collision Warning (FCW) * ■ Automatic shutoff FCW may automatically shut itself off and the FCW indicator comes and stays on when: • The temperature inside the system is high. • The windshield is blocked by dirt, mud, leaves, wet snow, etc. Once the conditions that caused FCW to shut off improve or are addressed (e.g., cleaning), the system comes back on.
uuWhen DrivinguForward Collision Warning (FCW) * ■ FCW Limitations FCW may not activate or may not detect a vehicle in front of your vehicle, and may activate even when you are aware of a vehicle ahead of you, or when there is no vehicle ahead, under the following conditions. Condition ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Driving ● The distance between your vehicle and the vehicle ahead of you is too short. A vehicle cuts in front of you at a slow speed, and it brakes suddenly.
uuWhen DrivinguLane Departure Warning (LDW) * Lane Departure Warning (LDW) * Alerts you when the system detects a possibility of your vehicle unintentionally crossing over left or right side lane markings. ■ How the System Works If your vehicle is getting too close to detected left or right side lane markings without a turn signal activated, LDW will give audible and visual alerts.
uuWhen DrivinguLane Departure Warning (LDW) * ■ LDW Camera 1LDW Camera The camera is located behind the rearview mirror. LDW Camera ■ LDW On and Off Press the LDW button to turn the system on and off. uThe indicator in the button comes on when the system is on. Do not place an object on the top of the instrument panel. It may reflect onto the windshield and prevent the system from detecting lane lines properly.
uuWhen DrivinguLane Departure Warning (LDW) * ■ LDW Limitations LDW may not activate or may not recognize lanes, and may activate even when keeping in the middle of a lane, under the following conditions. Condition ● ● ● ● ● ● ● ● ● Driving ● ● ● ● ● ● 352 When you drive in bad weather (rain, fog, etc.). A heavy load in the rear or modifications to the suspension tilts your vehicle. An abnormal tire condition is detected (wrong tire size, flat tire, etc.).
uuWhen DrivinguLane Keeping Assist System (LKAS) * Lane Keeping Assist System (LKAS) * Provides steering input to help keep the vehicle in the middle of a detected lane and provides audible and visual alerts if the vehicle is detected drifting out of its lane. ■ Audible and visual alerts Beeps and a warning display alert you that the vehicle is drifting out of a detected lane.
uuWhen DrivinguLane Keeping Assist System (LKAS) * ■ When the System can be Used The system can be used when the following conditions are met. • The lane you are driving in has detectable lane markers on both sides, and your vehicle is in the center of the lane. • The vehicle speed is between 45 and 90 mph (72 and 145 km/h). • You are driving on a straight or slightly curved road. • The turn signals are off. • The brake pedal is not depressed. • The wipers are not in continuous operation.
uuWhen DrivinguLane Keeping Assist System (LKAS) * 3. Keep your vehicle near the center of the lane while driving. u The dotted outer lines change to solid ones once the system starts operating after detecting the left and right lane markings. ■ To cancel 1When the System can be Used The LKAS temporarily deactivates when it fails to detect lane lines. When the system detects the lines again, it comes back on automatically. 1To cancel Pressing the MAIN button also turns ACC with LSF on and off.
uuWhen DrivinguLane Keeping Assist System (LKAS) * ■ The system operation is suspended if When the LKAS is suspended, the lane lines on the multiinformation display change to contour lines. you: • Set the wipers to continuous operation. uTurning the wipers off resumes the LKAS. • Decrease the vehicle speed to 40 mph (64 km/h) or less. uIncreasing the vehicle speed to 45 mph (72 km/h) or more resumes the LKAS. • Depress the brake pedal.
uuWhen DrivinguLane Keeping Assist System (LKAS) * ■ LKAS Limitations The system may not detect lane markings and the position of your vehicle properly under the following conditions. Condition ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Driving ● The vehicle interior is reflected onto the front windshield. Headlight lenses are dirty or the headlights are not properly adjusted. The windshield is fogged. Driving on snowy or wet roads. The ambient brightness suddenly changes (e.g.
uuWhen DrivinguVSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine output and selectively applying the brakes.
uuWhen DrivinguVSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System ■ VSA® On and Off This button is on the driver side control panel. To turn the VSA® system on and off, press and hold it until you hear a beep. VSA® will stop and the indicator will come on. VSA® OFF Indicator To turn it on again, press the button until you hear a beep. (VSA® OFF) VSA® is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.
uuWhen DrivinguAgile Handling Assist System Agile Handling Assist System Lightly brakes each of the front and rear wheels, as needed, when you turn the steering wheel, and helps support the vehicle’s stability and performance during cornering. 1Agile Handling Assist System The agile handling assist system cannot enhance stability in all driving situations. You still need to drive and corner at speeds appropriate for the conditions and always leave a sufficient margin of safety.
uuWhen DrivinguBlind Spot Information (BSI) System * Blind Spot Information (BSI) System * Is designed to detect vehicles in specified alert zones adjacent to your vehicle, particularly in harder to see areas commonly known as “blind spots.” When the system detects vehicles approaching from behind in adjacent lanes, the appropriate indicator comes on for a few seconds, providing assistance when you change lanes.
uuWhen DrivinguBlind Spot Information (BSI) System * ■ When the system detects a vehicle BSI Alert Indicator: Located near the outside rearview mirror on both sides. 1Blind Spot Information (BSI) System * Comes On ■ Comes on when ● ● A vehicle enters the alert zone from behind to overtake you with a speed difference of no more than 31 mph (50 km/h) from your vehicle. You pass a vehicle with a speed difference of no more than 12 mph (20 km/h).
uuWhen DrivinguSuper Handling-All Wheel DriveTM (SH-AWD®) * Super Handling-All Wheel DriveTM (SH-AWD®) * The system controls and transfers varying amounts of engine torque to each wheel in accordance with the driving conditions. SH-AWD® helps to enhance driving stability, and lets you handle situations like slippery surfaces, such as snow, sand, mud, and steep hills, better than when driving with two wheel drive. However, the system does not help to enhance braking.
uuWhen DrivinguTire Pressure Monitoring System (TPMS) ■ Tire Pressure Monitor 1Tire Pressure Monitor To select the tire pressure monitor, set the power mode to ON, and roll the multi-function steering-wheel controls until you see the tire pressure screen. The pressure for each tire is displayed in psi (U.S.) or kPa (Canada). Tire Pressures Low is displayed when a tire has significantly low pressure. The specific tire is displayed on the screen.
uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation Tire Pressure Monitoring System (TPMS) - Required Federal Explanation Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.
Braking Brake System ■ Parking Brake 1Parking Brake Use the parking brake to keep the vehicle stationary when parking. To apply: Depress the parking brake pedal down with your foot. NOTICE Release the parking brake fully before driving. The rear brakes and axle can be damaged if you drive with the parking brake applied. If you start driving without fully releasing the parking brake, a buzzer sounds as a warning, and Release Parking Brake appears on the MID. Always apply the parking brake when parking.
uuBrakinguBrake System ■ Foot Brake Your vehicle is equipped with disc brakes at all four wheels. A vacuum power assist helps reduce the effort needed on the brake pedal. The brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard. 2 Brake Assist System P. 370 2 Anti-lock Brake System (ABS) P.
uuBrakinguAnti-lock Brake System (ABS) Anti-lock Brake System (ABS) ■ ABS Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you. The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading. You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal.
uuBrakinguBrake Assist System Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking. ■ Brake assist system operation Press the brake pedal firmly for more powerful braking. When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * Collision Mitigation Braking SystemTM (CMBSTM) * Can assist you when there is a possibility of your vehicle colliding with a vehicle detected in front of yours. The CMBSTM is designed to alert you when a potential collision is determined, as well as to reduce your vehicle speed when a collision is deemed unavoidable to help minimize collision severity.
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * ■ When the system activates 1When the system activates The system provides visual and audible alerts of a possible collision, and stops the alerts if the collision is avoided. u Take appropriate action to prevent a collision (apply the brakes, change lanes, etc.) Heads-up Warning Lights Visual Alerts Beep Driving 372 Audible Alert The heads-up warning uses a lens located at the front end of the dashboard.
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * ■ Collision Alert Stages The system has three alert stages for a possible collision. However, depending on the circumstances, the CMBSTM may not go through all of the stages before initiating the last stage. CMBSTM Distance between vehicles The radar sensor detects a vehicle E-pretensioner Audible & Visual WARNINGS Braking You can change the distance between vehicles at which visual alerts will display (Long/Normal/ Short).
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * CMBSTM Distance between vehicles Stage two Your Vehicle The radar sensor detects a vehicle E-pretensioner Vehicle Ahead Retracts the driver’s seat The risk of a belt gently a few times, collision has providing a physical increased, time to warning. respond is reduced. Vehicle Ahead Forcefully tightens driver The CMBSTM and front passenger seat determines that a belts. collision is unavoidable.
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * ■ CMBSTM On and Off 1Collision Mitigation Braking SystemTM (CMBSTM) * Press this button for about one second to turn on and off the system. When the CMBSTM is off: • The beeper sounds. • The CMBSTM indicator in the instrument panel comes on. • A message on the MID reminds you that the system is off. The CMBSTM is in the previously selected ON or OFF setting each time you start the engine.
uuBrakinguCollision Mitigation Braking SystemTM (CMBSTM) * ■ With Little Chance of a Collision The CMBSTM may activate even when you are aware of a vehicle ahead of you, or when there is no vehicle ahead. Some examples of this are: ■ When Passing Your vehicle approaches another vehicle ahead of you and you change lanes to pass.
Parking Your Vehicle When Stopped 1. Depress the brake pedal firmly with the shift lever in (D . 2. Firmly apply the parking brake. 3. Move the shift lever from (D to (P . 4. Turn off the engine. Always set the parking brake firmly, in particular if you are parked on an incline. 1Parking Your Vehicle Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire. Raise the wiper arms when snow is expected.
uuParking Your VehicleuParking Sensor System * Parking Sensor System * The corner and center sensors monitor obstacles near your vehicle. The beeper and audio/information screen let you know the approximate distance between your vehicle and the obstacle.
uuParking Your VehicleuParking Sensor System * ■ Parking sensor system on and off With the power mode in ON, press the parking sensor system button to turn on or off the system. The indicator in the button comes on and the beeper sounds when the system is on. The rear center and corner sensors start to detect an obstacle when the shift lever is in (R , and the vehicle speed is less than 5 mph (8 km/h).
uuParking Your VehicleuParking Sensor System * ■ When the distance between your vehicle and obstacles behind becomes shorter Length of the intermittent beep Distance between the Bumper and Obstacle Indicator Corner Sensors Center Sensors Moderate — Rear: About 43-24 in (110-60 cm) Short About 24-18 in (60-45 cm) About 24-18 in (60-45 cm) Very short About 18-14 in (45-35 cm) About 18-14 in (45-35 cm) Continuous About 14 in (35 cm) or less About 14 in (35 cm) or less Audio/information screen
uuParking Your VehicleuParking Sensor System * ■ Turning off All Rear Sensors 1. Make sure that the parking sensor system is not activated. Set the power mode to VEHICLE OFF (LOCK). 2. Press and hold the parking sensor system button, and set the power mode to ON. 3. Keep pressing the button for 10 seconds. Release the button when the indicator in the button flashes. 4. Press the button again. The indicator in the button goes off. u The beeper sounds twice. The rear sensors are now turned off.
Multi-View Rear Camera * About Your Multi-View Rear Camera Models with navigation system 1About Your Multi-View Rear Camera For models with navigation system, see Navigation System Manual. Models without navigation system The audio/information screen can display your vehicle’s rear view. The display automatically changes to a rear view when the shift lever is moved to (R . ■ Multi-View Rear Camera Display Area Wide View Mode Guidelines Bumper Normal View Mode Driving Camera Approx.
Refueling Fuel Information ■ Fuel recommendation Unleaded premium gasoline, pump octane number 91 or higher Use of lower octane gasoline can cause occasional metallic knocking noise in the engine and will result in decreased engine performance. Use of gasoline with a pump octane less than 87 can lead to engine damage.
uuRefuelinguHow to Refuel How to Refuel 1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear. 2. Turn off the engine. 3. Press the fuel fill door release button. u The fuel fill door opens. Press 4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap. 1How to Refuel 3 WARNING Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.
Fuel Economy Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle. ■ Maintenance and Fuel Economy You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the MID.
Accessories and Modifications Accessories When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions. • Do not install any accessories over areas marked SRS Airbag, on the sides or backs of the front seats, on front or side pillars, or near the side windows.
Maintenance This chapter discusses basic maintenance. Before Performing Maintenance Inspection and Maintenance ............ 388 Safety When Performing Maintenance..389 Parts and Fluids Used in Maintenance Service ........................................... 390 Maintenance MinderTM ..................... 391 Maintenance Under the Hood Maintenance Items Under the Hood.. 395 Opening the Hood ........................... 396 Engine Compartment Cover............. 397 Recommended Engine Oil ................
Before Performing Maintenance Inspection and Maintenance For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.
uuBefore Performing MaintenanceuSafety When Performing Maintenance Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task. ■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel related parts.
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service Parts and Fluids Used in Maintenance Service The use of Acura genuine parts and fluids is recommended when maintaining and servicing your vehicle. Acura genuine parts are manufactured according to the same high quality standards used in Acura vehicles.
Maintenance MinderTM Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the MID. You can view them on the engine oil life screen at any time. To Use Maintenance MinderTM ■ Displaying the Engine Oil Life and Maintenance Items 1. Set the power mode to ON. 2. Roll the multi-function steering-wheel controls until the engine oil life appears on the MID.
uuMaintenance MinderTM uTo Use Maintenance MinderTM ■ Maintenance Minder Messages on the Multi-Information Display (MID) Maintenance Message Oil Life Display Explanation Information Maintenance Due Soon 15% The remaining engine oil life is 15 to 6 percent. Once you switch the display by rolling the multi-function steering-wheel controls, this message will go off. The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.
uuMaintenance MinderTM uTo Use Maintenance MinderTM ■ Maintenance Service Items 1Maintenance Service Items • Independent of the Maintenance Minder information, replace the brake fluid every 3 years. System Message Indicator • Inspect idle speed every 160,000 miles (256,000 Maintenance Minder Message km). • Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.
uuMaintenance MinderTM uTo Use Maintenance MinderTM ■ Resetting the Display 1Resetting the Display Reset the engine oil life display if you have performed the maintenance service. Maintenance Service Items The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.
Maintenance Under the Hood Maintenance Items Under the Hood Engine Oil Fill Cap Engine Oil Dipstick (Orange Loop) Brake Fluid (Black Cap) Washer Fluid (Blue Cap) Battery Maintenance Engine Coolant Reservoir Radiator Cap 395
uuMaintenance Under the HooduOpening the Hood Opening the Hood Hood Release Handle 1. Park the vehicle on a level surface, and set the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard. u The hood will pop up slightly. Pull 1Opening the Hood NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, and may damage either the hood or the wipers. When closing the hood, check that the hood is securely latched. 3.
uuMaintenance Under the HooduEngine Compartment Cover Engine Compartment Cover The component parts in the engine compartment are protected by a cover. You may need to remove the cover when you perform certain maintenance work.
uuMaintenance Under the HooduRecommended Engine Oil Recommended Engine Oil • Genuine Acura Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the container. Oil is a major contributor to your engine’s performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged. This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.
uuMaintenance Under the HooduOil Check Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil. 1. Remove the dipstick (orange loop). 2. Wipe the dipstick with a clean cloth or paper towel. 3. Insert the dipstick back all the way into its hole. 1Oil Check If the oil level is near or below the lower mark, slowly add oil being careful not to overfill. 4.
uuMaintenance Under the HooduAdding Engine Oil Adding Engine Oil 1. Unscrew and remove the engine oil fill cap. 2. Add oil slowly. 3. Reinstall the engine oil fill cap, and tighten it securely. 4. Wait for three minutes and recheck the engine oil dipstick. Engine Oil Fill Cap Maintenance 400 1Adding Engine Oil If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components. NOTICE Do not fill the engine oil above the upper mark.
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine’s lubrication. The engine may be damaged if they are not changed regularly. Change the oil and filter in accordance with the maintenance message on the multiinformation display. 1. Run the engine until it reaches normal operating temperature, and then turn the Drain Bolt engine off. 2.
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter Oil Filter Maintenance 402 4. Remove the oil filter and dispose of the remaining oil. 5. Check that the filter gasket is not stuck to the engine contact surface. u If it is stuck, you must detach it. 6. Wipe away dirt and dust adhering to the contact surface of the oil filter base, and install a new oil filter. u Apply a light coat of new engine oil to the oil filter rubber seal. 7.
uuMaintenance Under the HooduEngine Coolant Engine Coolant 1Engine Coolant Specified coolant: Acura Long Life Antifreeze/Coolant Type 2 This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water. We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly. ■ Reserve Tank 1.
uuMaintenance Under the HooduEngine Coolant ■ Radiator 1Radiator Radiator Cap 1. Make sure the engine and radiator are cool. 2. Remove the engine compartment cover. 2 Engine Compartment Cover P. 397 3. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning. 4. Push down and turn the radiator cap counterclockwise to remove it. 5. The coolant level should be up to the base of the filler neck. Add coolant if it is low. 6.
uuMaintenance Under the HooduTransmission Fluid Transmission Fluid ■ Automatic Transmission Fluid Specified fluid: Acura ATF DW-1 (automatic transmission fluid) Have a dealer check the fluid level and replace if necessary. 1Automatic Transmission Fluid NOTICE Do not mix Acura ATF DW-1 with other transmission fluids. Using a transmission fluid other than Acura ATF DW1 may adversely affect the operation and durability of your vehicle’s transmission, and damage the transmission.
uuMaintenance Under the HooduBrake Fluid Brake Fluid Specified fluid: Acura Heavy Duty Brake Fluid DOT 3 NOTICE ■ Checking the Brake Fluid The fluid level should be between the MIN and MAX marks on the side of the reservoir. Brake Reservoir 1Brake Fluid MAX MIN Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
Replacing Light Bulbs Headlight Bulbs Headlight bulbs are LED type. Have an authorized Acura dealer inspect and replace the light assembly. Daytime Running Light Bulbs Daytime running light bulbs are LED type. Have an authorized Acura dealer inspect and replace the light assembly. 1Headlight Bulbs The headlight aim is set by the factory, and does not need to be adjusted.
uuReplacing Light BulbsuFront Turn Signal/Front Side Marker/Parking Light Bulbs Front Turn Signal/Front Side Marker/Parking Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Side Marker/Parking Light: 28/8 W 1Front Turn Signal/Front Side Marker/Parking Light Bulbs Insert a flat-tip screwdriver, lift and remove the center pin to remove the clip. 1. Remove the holding clips, and pull the inner fender back. Inner Fender Clip Socket 2. Turn the socket to the left and remove it. 3.
uuReplacing Light BulbsuBrake Light and Turn Signal Light Bulbs Brake Light and Turn Signal Light Bulbs When replacing, use the following bulbs. Brake Light: 21 W Rear Turn Signal Light: 21 W 1. Remove the cover. uStarting at the bottom, carefully pull the cover straight out, working upward until all pins are removed from their the grommets. uThe grommets should remain in the body. Bolts 2. Use a Phillip-head screwdriver to remove the bolts. 3. Pull the light assembly out of the rear pillar.
uuReplacing Light BulbsuTaillight and Rear Side Marker Light Bulbs 4. Turn the socket to the left and remove it. Remove the old bulb. 5. Insert a new bulb. 6. Slide the light assembly onto the guide on the body. 7. Align the pins with the body grommets, then push in until they fully seat. Bulb Socket Taillight and Rear Side Marker Light Bulbs Taillight and rear side marker light bulbs are the LED type. Have an authorized Acura dealer inspect and replace the light assembly.
uuReplacing Light BulbsuBack-Up Light Back-Up Light When replacing, use the following bulbs. Back-Up Light: 21 W 1. Remove the cover by prying on the edge using a flat-tip screwdriver. u Wrap the flat-tip screwdriver with a cloth to prevent scratches. Bulb Maintenance Socket 2. Turn the socket to the left and remove it. Remove the old bulb. 3. Insert a new bulb.
uuReplacing Light BulbsuRear License Plate Light Bulbs Rear License Plate Light Bulbs Rear license plate light bulbs are the LED type. Have an authorized Acura dealer inspect and replace the light assembly. High-Mount Brake Light Bulbs High-mount brake light bulbs are the LED type. Have an authorized Acura dealer inspect and replace the light assembly. LED Puddle Light Bulbs LED puddle light bulbs are LED type. Have an authorized Acura dealer inspect and replace the light assembly.
Checking and Maintaining Wiper Blades Checking Wiper Blades If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass. Changing the Front Wiper Blade Rubber 1Changing the Front Wiper Blade Rubber 1. Lift the driver side wiper arm first, then the passenger side. Lock Tab NOTICE Avoid dropping the wiper arm; it may damage the windshield. 2. Place a cloth on the edge of the lock tab. Push the lock tab up with a flat-tip screw driver. 3.
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber 4. Slide the wiper blade out from its holder by pulling the tabbed end out. Blade 5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade. u Correctly align the rubber protrusion and the retainer grooves. Blade Retainer Maintenance 414 Indent Tab 6. Slide the new wiper blade onto the holder from the bottom end.
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber Changing the Rear Wiper Blade Rubber 1. Raise the wiper arm off. 1Changing the Rear Wiper Blade Rubber NOTICE Avoid dropping the wiper arm; it may damage the windshield. 2. Slide the wiper blade out from the end with the indent. Blade 3. Remove the retainers from wiper blade and mount to a new rubber blade.
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber 4. Slide the wiper blade onto the holder. u Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.
Checking and Maintaining Tires Checking Tires To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated. ■ Inflation guidelines Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver’s doorjamb label or specification’s page for the specified pressure.
uuChecking and Maintaining TiresuTire and Loading Information Label Tire and Loading Information Label The label attached to the driver’s doorjamb provides necessary tire and loading information. Label Example 1Tire and Loading Information Label The tire and loading information label attached to the driver’s doorjamb contains: a The number of people your vehicle can carry. b The total weight your vehicle can carry. Do not exceed this weight. c The original tire sizes for front, rear, and spare.
uuChecking and Maintaining Tires uTire Labeling ■ Tire Identification Number (TIN) The tire identification number (TIN) is a group of numbers and letters that look like the example in the side column. TIN is located on the sidewall of the tire. ■ Glossary of Tire Terminology DOT B97R FW6X 2209 DOT: This indicates that the tire meets all requirements of the U.S. Department of Transportation. B97R: Manufacturer’s identification mark. FW6X: Tire type code. 22 09: Date of manufacture.
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles) DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. ■ Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles) ■ Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
uuChecking and Maintaining TiresuWear Indicators Wear Indicators Example of a Wear Indicator mark The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out tires have poor traction on wet roads.
uuChecking and Maintaining TiresuTire and Wheel Replacement Tire and Wheel Replacement Replace your tires with radials of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires of a different size or construction can cause the ABS and VSA® (vehicle stability assist) system to work incorrectly. It is best to replace all four tires at the same time. If that isn’t possible, replace the front or rear tires in pairs.
uuChecking and Maintaining TiresuTire Rotation Tire Rotation Rotating tires according to the maintenance messages on the MID helps to distribute wear more evenly and increase tire life. ■ Tires without rotation marks Rotate the tires as shown here. Front 1Tire Rotation Tires with directional tread patterns should only be rotated front to back (not from one side to the other). Directional tires should be mounted with the rotation indication mark facing forward, as shown below.
uuChecking and Maintaining TiresuWinter Tires Winter Tires If driving on snowy or frozen roads, mount all season marked “M+S” tires, snow tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving. Be particularly careful when operating the steering wheel or brakes to prevent skidding. 1Winter Tires 3 WARNING Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed.
Battery Checking the Battery The battery condition is being monitored by the sensor on the negative terminal. If there is a problem with the sensor, the warning message on MID will let you know. Have your vehicle checked by a dealer. If your vehicle’s battery is disconnected or goes dead: • The audio system is disabled. 2 Audio System Theft Protection P. 201 • The clock resets. 2 Clock P. 114 • The navigation system * is disabled.
Remote Transmitter Care Replacing the Button Battery Models without remote control engine start system 1Replacing the Button Battery If the indicator does not come on when the button is pressed, replace the battery. NOTICE An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal. Battery type: CR2032 1. Remove the built-in key. Replacement batteries are commercially available or at a dealer. Battery 2.
uuRemote Transmitter CareuReplacing the Button Battery Models with remote control engine start system If the indicator does not come on when the button is pressed, replace the battery. Battery type: CR2032 1. Remove the built-in key. u As a convenience, lightly place masking tape over the remote buttons to hold them in place. Battery Maintenance 428 2. Remove the upper half by carefully prying on the edge with a coin. u Wrap a coin with a cloth to prevent scratching the transmitter. 3.
Remote Control and Wireless Headphone Care * Models with Rear Entertainment System Replacing the Battery 1Replacing the Battery ■ Remote Control NOTICE If it takes several pushes on the remote control buttons to operate the rear entertainment system, replace the battery. Battery type: BR3032 1. Remove the cover. 2. Make sure to replace the battery with the correct polarity. An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
uuRemote Control and Wireless Headphone Care * uReplacing the Battery ■ Wireless Headphone If there is no sound coming from the wireless headphone, replace the battery. Battery type: AAA Coin Cover Maintenance 430 Battery 1. To open the cover, insert a coin in the slot and twist it slightly to pry the cover away from the earpiece. 2. Make sure to replace the battery with the correct polarity.
Climate Control System Maintenance Dust and Pollen Filter The climate control system is equipped with a dust and pollen filter that collects pollen, dust, and other debris in the air. The Maintenance MinderTM messages will let you know when to replace the filter. We recommend that you replace the dust and pollen filter sooner when using your vehicle in areas with high concentrations of dust.
Cleaning Interior Care Use a damp cloth with a mixture of mild detergent and warm water to remove dirt. Use a clean cloth to remove detergent residue. ■ Cleaning Seat Belts Use a soft brush with a mixture of mild soap and warm water to clean the seat belts. Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth. Opening 1Interior Care Do not spill liquids inside the vehicle. Electrical devices and systems may malfunction if liquids are splashed on them.
uuCleaninguInterior Care ■ Floor Mats Unlock Lock 1Floor Mats The front floor mats hook over the floor anchors, which keep the mats from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat after cleaning, turn the knobs to the lock position. If you use any floor mats that were not originally provided with your vehicle, make sure they are designed for your specific vehicle, fit correctly, and are securely anchored by the floor anchors.
uuCleaninguExterior Care Exterior Care Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a painted surface can result in body rust. If you find a scratch, promptly repair it. ■ Washing the Vehicle Wash the vehicle regularly. Wash more frequently when driving in the following conditions: • If driving on roads with road salt. • If driving in coastal areas.
uuCleaninguExterior Care ■ Applying Wax A good coat of automotive body wax helps protect your vehicle’s paint from the elements. Wax will wear off over time and expose your vehicle’s paint to the elements, so reapply as necessary. ■ Maintaining the Bumpers and Other Resin Coated Parts If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth and clean water.
436
Handling the Unexpected This chapter explains how to handle unexpected troubles. Tools Types of Tools .................................. 438 If a Tire Goes Flat Changing a Flat Tire * ....................... 439 Temporarily Repairing a Flat Tire * ..... 446 Engine Does Not Start Checking the Engine ........................ 457 If the Keyless Access Remote Battery is Weak ............................................. 458 Emergency Engine Stop ................... 459 Jump Starting............................
Tools Types of Tools 1Types of Tools The tools are stored in the cargo area.
If a Tire Goes Flat Changing a Flat Tire * If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed. Then, stop in a safe place. Replace the flat tire with a compact spare tire. Go to a dealer as soon as possible to have the full-size tire repaired or replaced. 1. Park the vehicle on firm, level, non-slippery surface and apply the parking brake. 2. Move the shift lever to (P . 3. Turn on the hazard warning lights and set the power mode to VEHICLE OFF (LOCK).
uuIf a Tire Goes FlatuChanging a Flat Tire * ■ Getting Ready to Replace the Flat Tire 1. Push the rear edge of the handle on the floor lid and open the lid. Handle Handling the Unexpected 2. Take out the cargo floor box. Cargo Floor Box Tool Case 440 * Not available on all models 3. Take the jack, wheel nut wrench, and jack handle bar out of the tool case. 1Changing a Flat Tire * NOTICE Do not use the jack if it doesn’t work properly. Call your dealer or a professional towing service.
uuIf a Tire Goes FlatuChanging a Flat Tire * 4. Remove the cover on the cargo area lining to access the shaft for the spare tire hoist. Cover Jack Handle Bar Wheel Nut Wrench Bracket 6. Keep turning the wheel nut wrench to create slack in the cable. 7. Remove the bracket from the spare tire. Continued Handling the Unexpected 5. Put the wheel nut wrench with the jack handle bar on the hoist shaft. Turn the wrench to the left to lower the spare tire to the ground.
uuIf a Tire Goes FlatuChanging a Flat Tire * 8. Place a wheel block or rock in front and rear of the wheel diagonal to the flat tire. Wheel Blocks The tire to be replaced. Handling the Unexpected 442 9. Place the compact spare tire wheel side up under the vehicle body, near the tire that needs to be replaced. 10. Loosen each wheel nut about one turn using the wheel nut wrench.
uuIf a Tire Goes FlatuChanging a Flat Tire * ■ How to Set Up the Jack 1How to Set Up the Jack 1. Place the jack under the jacking point closest to the tire to be changed. 3 WARNING The vehicle can easily roll off the jack, seriously injuring anyone underneath. Follow the directions for changing a tire exactly, and never get under the vehicle when it is supported only by the jack. 3. Raise the vehicle, using the jack handle bar and the jack handle, until the tire is off the ground.
uuIf a Tire Goes FlatuChanging a Flat Tire * ■ Replacing the Flat Tire 1Replacing the Flat Tire 1. Remove the wheel nuts and flat tire. Handling the Unexpected 2. Wipe the mounting surfaces of the wheel with a clean cloth. 3. Mount the compact spare tire. 4. Screw the wheel nuts until they touch the lips around the mounting holes, then stop rotating. 5. Lower the vehicle and remove the jack. Tighten the wheel nuts in the order indicated in the image.
uuIf a Tire Goes FlatuChanging a Flat Tire * ■ Storing the Flat Tire Jack Handle Bar Wheel Nut Wrench 1Storing the Flat Tire ■ TPMS and the Spare Tire If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator comes on while you are driving. After driving for a few miles (kilometers), the indicator will start blinking for a short time and then stay on. Tire Pressure Monitor Problem appears on the multi-information display (MID), but this is normal.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * Temporarily Repairing a Flat Tire * If the tire has a large cut or is otherwise severely damaged, you will need to have the vehicle towed. If the tire only has a small puncture, from a nail for instance, you can use the temporary tire repair kit so that you can drive to the nearest service station for a more permanent repair. If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * 1. Pull the handle on the cargo area floor lid and open the lid. 1Getting Ready to Temporarily Repair the Flat Tire When making a temporary repair, carefully read the instruction manual provided with the kit. Handle 2. Take out the cargo floor box. Case Tire Repair Kit 3. Take the kit out of the case. 4. Place the kit face up, on flat ground near the flat tire, and away from traffic. Do not place the kit on its side.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * ■ Injecting Sealant and Air Valve Cap 1Injecting Sealant and Air 1. Remove the valve cap from the tire valve stem. 3 WARNING Tire sealant contains substances that are harmful and can be fatal if swallowed. If accidentally swallowed, do not induce vomiting. Drink plenty of water and get medical attention immediately. Valve Stem Handling the Unexpected 2. Remove the sealant/air hose from the packaging.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * 4. Plug in the compressor to the accessory power socket. u Be careful not to pinch the cord in a door or window. u Do not plug any other electronic devices into other accessory power sockets. 1Injecting Sealant and Air 3 WARNING Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid build-up of toxic carbon monoxide. 2 Accessory Power Sockets P. 178 2 Carbon Monoxide Gas P. 66 6.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * Pressure Gauge ON OFF Handling the Unexpected Sealant/Air Hose 7. Press the inflator switch to turn on the compressor. u The compressor starts injecting sealant and air into the tire. 8. When the sealant injection is complete, continue to add air. 9. After the air pressure reaches 35 psi (240 kPa), turn off the kit. u To check the pressure, occasionally turn off the compressor and read the gauge. 10.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * Repair Notification Label 13. Apply the repair notification label to the flat surface of the wheel. u The wheel surface must be clean to ensure the label adheres properly. 1. Apply the speed restriction label to the location as shown. 2. Drive the vehicle for about 10 minutes. u Do not exceed 50 mph (80 km/h). 3. Stop the vehicle in a safe place.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * 4. Recheck the air pressure using the air only hose on the compressor. Air Only Hose Handling the Unexpected 452 AIR ONLY side 5. Turn the selector switch to AIR ONLY. u Do not turn the air compressor on to check the pressure. 2 Inflating an Under-inflated Tire P. 454 ON 6. If the air pressure is • Less than 19 psi (130 kPa): Do not add air or continue driving. The leak is too severe. Call for help and have your vehicle towed.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * • Greater than 19 psi (130 kPa), but less than 35 psi (240 kPa): Turn the air compressor on to inflate the tire until the tire pressure reaches 35 psi (240 kPa). Turn the air compressor on to inflate the tire until the tire pressure reaches front: 35 psi (240 kPa)/rear: 33 psi (230 kPa). 2 Inflating an Under-inflated Tire P.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * ■ Inflating an Under-inflated Tire You can use the kit to inflate a non-punctured under-inflated tire. 1. Open the cargo area floor lid. 2 Getting Ready to Temporarily Repair the Flat Tire P. 446 2. Remove the kit from the case. 3. Place the kit, face up, on flat ground near the flat tire, away from traffic. Do not place the kit on its side. 4. Remove the air only hose from the kit. Handling the Unexpected Air Only Hose 5. Remove the valve cap.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * 7. Plug in the kit to the accessory power socket. u Be careful not to pinch the cord in a door or window. u Do not plug any other electronic devices into other accessory power sockets. 1Inflating an Under-inflated Tire 3 WARNING Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid build-up of toxic carbon monoxide. 2 Accessory Power Sockets P. 178 9. Turn the selector switch to AIR ONLY. 10.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire * Pressure Relief Button Handling the Unexpected 456 12. Turn off the kit. u Check the pressure gauge on the air compressor. u If overinflated, press the pressure relief button. 13. Unplug the kit from the accessory power socket. 14. Unscrew the air only hose from the tire valve stem. Reinstall the valve cap. 15. Press the pressure relief button until the gauge returns to 0 psi (0 kPa). 16. Repackage and properly stow the kit.
Engine Does Not Start Checking the Engine If the engine does not start, check the starter. 1Checking the Engine If you must start the vehicle immediately, use an assisting vehicle to jump start it. 2 Jump Starting P. 460 Checklist Check for a message on the MID. ● If the To Start, Hold Remote Near Start Button message appears 2 If the Keyless Access Remote Battery is Weak P. 458 uMake sure the keyless access remote is in its operating range. 2 ENGINE START/STOP Button Operating Range P.
uuEngine Does Not StartuIf the Keyless Access Remote Battery is Weak If the Keyless Access Remote Battery is Weak Handling the Unexpected 458 If the beeper sounds, the To Start, Hold Remote Near Start Button message appears on the MID, the indicator on the ENGINE START/STOP button flashes, and the engine won’t start, start the engine as follows. 1.
uuEngine Does Not StartuEmergency Engine Stop Emergency Engine Stop 1Emergency Engine Stop NOTICE Do not press the button while driving unless it is absolutely necessary for the engine to be switched off. Handling the Unexpected The ENGINE START/STOP button may be used to stop the engine due to an emergency situation even while driving. If you must stop the engine, do either of the following operations: • Press and hold the ENGINE START/STOP button for about two seconds.
Jump Starting ■ Jump Starting Procedure 1Jump Starting Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Pull up on the engine cover, remove it from the pins. 3 WARNING A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. Keep all sparks, open flames, and smoking materials away from the battery. Handling the Unexpected Engine Cover 2.
uuJump Startingu ■ What to Do After the Engine Starts Once your vehicle’s engine has started, remove the jumper cables in the following order. 1. Disconnect the jumper cable from your vehicle’s ground. 2. Disconnect the other end of the jumper cable from the booster battery terminal. 3. Disconnect the jumper cable from your vehicle’s battery + terminal. 4. Disconnect the other end of the jumper cable from the booster battery + terminal. Handling the Unexpected 5.
Shift Lever Does Not Move Follow the procedure below if you cannot move the shift lever out of the (P position. ■ Releasing the Lock Slot Handling the Unexpected Release Button Shift Lock Release Slot 462 Cover 1. Set the parking brake. 2. Remove the built-in key from the keyless access remote. 3. Wrap a cloth around the tip of a small flattip screwdriver. Place it at the back of the release lock cover, and remove the cover. 4. Insert the key into the shift lock release slot. 5.
Overheating How to Handle Overheating Overheating symptoms are as follows: • The temperature gauge needle is at the H mark or the engine suddenly loses power. • Steam or spray comes out of the engine compartment. ■ First thing to do Continued 3 WARNING Steam and spray from an overheated engine can seriously scald you. Do not open the hood if steam is coming out. NOTICE Continuing to drive with the temperature gauge needle at the H mark may damage the engine. Handling the Unexpected 1.
uuOverheatinguHow to Handle Overheating ■ Next thing to do Reserve Tank 1How to Handle Overheating MAX MIN Handling the Unexpected 1. Check that the cooling fan is operating and stop the engine once the temperature gauge needle goes down. u If the cooling fan is not operating, immediately stop the engine. 2. Once the engine has cooled down, inspect the coolant level and check the cooling system components for leaks.
Indicator, Coming On/Blinking If the Low Oil Pressure Indicator Comes On ■ Reasons for the indicator to come on Comes on when the engine oil pressure is low. ■ What to do as soon as the indicator comes on 1. Immediately park the vehicle on level ground in a safe place. 2. If necessary, turn the hazard warning lights on. ■ What to do after parking the vehicle 1. Stop the engine and let it sit for about three minutes. 2. Open the hood and check the oil level.
uuIndicator, Coming On/BlinkinguIf the Malfunction Indicator Lamp Comes On or Blinks If the Malfunction Indicator Lamp Comes On or Blinks ■ Reasons for the indicator lamp to come on or blink Handling the Unexpected • Comes on when there is a problem with the engine emissions control system, or the fuel fill cap is missing, or loose. • Blinks when engine misfiring is detected. ■ What to do when the indicator lamp comes on Avoid high speeds and immediately get your vehicle inspected at a dealer.
uuIndicator, Coming On/BlinkinguIf the Brake System Indicator (Red) Comes On If the Brake System Indicator (Red) Comes On U.S. Canada ■ Reasons for the indicator to come on • The brake fluid is low. • There is a malfunction in the brake system. ■ What to do when the indicator comes on while driving Press the brake pedal lightly to check pedal pressure. • If normal, check the brake fluid level the next time you stop. • If abnormal, take immediate action.
uuIndicator, Coming On/BlinkinguIf the Low Tire Pressure/TPMS Indicator Comes On or Blinks If the Low Tire Pressure/TPMS Indicator Comes On or Blinks ■ Reasons for the indicator to come on or blink Handling the Unexpected 468 A tire pressure is significantly low. If there is a problem with the TPMS or the compact spare tire * is installed, the indicator blinks for about one minute, and then stays on. ■ What to do when the indicator comes on Stop your vehicle in a safe place.
Fuses Fuse Locations If any electrical devices are not working, set the power mode to VEHICLE OFF (LOCK) and check to see if any applicable fuse is blown. ■ Engine Compartment Fuse Box * Not available on all models 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Circuit Protected − − ACG FR IG1 Washer IG1 VBSOL IG1 ECU FR − FI SUB DBW FI Main IG Coil DRL R DRL L INJ Radio Amps − − 15 A 15 A 7.5 A 7.
uuFusesuFuse Locations Located near the battery. Push the tabs to open the box.
uuFusesuFuse Locations ■ Driver’s Side Interior Fuse Box Located under the dashboard. Fuse Box Fuse locations are shown on the label on the side panel. Locate the fuse in question by the fuse number and label number. ■ Circuit protected and fuse rating 1 2 3 4 5 Circuit Protected Passenger’s Side Door Lock Rear Passenger’s Side Door Lock Driver’s Side Door Lock Passenger’s Door Unlock Rear Passenger’s Side Door Unlock Amps 10 A 7.5 A 7.5 A 10 A Amps 7.5 A 20 A 10 A 20 A 15 A 7.5 A 20 A 7.
uuFusesuFuse Locations ■ Passenger’s Side Interior Fuse ■ Circuit protected and fuse rating Box Located on the lower side panel. Take off the cover to open. Fuse Label 1 2 3 4 5 6 Handling the Unexpected 7 Cover Fuse locations are shown on the cover.
uuFusesuFuse Locations ■ Circuit protected and fuse rating ■ Rear Fuse Box Located on the left side of cargo area. Remove the cover by prying on the edge of the cover using a flat-tip screwdriver. uWrap the flat-tip screwdriver with a cloth to prevent scratches. Fuse Box Cover Fuse locations are shown on the cover. Locate the fuse in question by the fuse number and box cover number.
uuFusesuInspecting and Changing Fuses Inspecting and Changing Fuses Blown Fuse Combined Fuse Handling the Unexpected 474 Fuse Puller 1. Set the power mode to VEHICLE OFF (LOCK). Turn headlights and all accessories off. 2. Remove the fuse box cover. 3. Check the large fuse in the engine compartment. u If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one. 4. Inspect the small fuses in the engine compartment and the vehicle interior.
Emergency Towing Call a professional towing service if you need to tow your vehicle. All models ■ Flat bed equipment The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. 1Emergency Towing NOTICE Trying to lift or tow your vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle’s weight. NOTICE 2WD models ■ Wheel lift equipment Never tow your vehicle with just a rope or chain.
When You Cannot Unlock the Fuel Fill Door ■ What to Do When Unable to Unlock the Fuel Fill Door If you cannot unlock the fuel fill door, use the following procedure. 1. Open the tailgate. Cover 2. Lift the cargo floor lid by the handle in the center. 3. Remove the cargo floor box and set it aside. 4. Wrap a cloth around the flat-tip screwdriver. Put it into the cover slot as shown in the image, and remove the cover. Handling the Unexpected 476 Release Lever 5. Pull the release lever toward you.
When You Cannot Open the Tailgate ■ What to Do When Unable to Open the Tailgate If you cannot open the tailgate, use the following procedure. 1. Wrap a cloth around the flat-tip Cover screwdriver. Put it into the cover as shown in the image, and remove the cover. 2. To open the tailgate, push the tailgate while sliding the lever to the right. After taking these steps, contact a dealer to have the vehicle checked.
478
Information This chapter includes your vehicle’s specifications, locations of identification numbers, and other information required by regulation. Specifications .................................... 480 Identification Numbers Vehicle Identification Number (VIN).. 482 Engine Number and Transmission Number...................................... 482 Emissions Testing Testing of Readiness Codes.............. 485 Warranty Coverages ........................ 487 Authorized Manuals.........................
Specifications ■ Vehicle Specifications ■ Engine Specifications ■ Light Bulbs Model No.
uuSpecificationsu ■ Automatic Transmission Fluid ■ Engine Oil Specified Capacity Recommended Acura ATF DW-1(automatic transmission fluid) Change 3.3 US qt (3.1 ℓ) ■ Rear Differential Fluid * Specified Capacity Acura All Wheel Drive Fluid (DPSF) Change 2.7 US qt (2.5 ℓ) ■ Transfer Assembly Fluid * Specified Capacity Capacity Acura HGO-Type1 to be applied. Change 0.45 US qt (0.43 ℓ) ■ Tire ·Genuine Acura Motor Oil 0W-20 ·API Premium-grade 0W-20 detergent oil Change 5.4 US qt (5.
Identification Numbers Vehicle Identification Number (VIN) Your vehicle has a 17-digit vehicle identification number (VIN) used to register your vehicle for warranty purposes, and for licensing and insuring your vehicle. See the image below for the VIN locations. 1Vehicle Identification Number (VIN) The interior vehicle identification number (VIN) is located under the cover. Engine Number and Transmission Number See the image below for the locations of your vehicle’s engine number and transmission number.
Devices that Emit Radio Waves The following products and systems on your vehicle emit radio waves when in operation.
Reporting Safety Defects In the U.S. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Emissions Testing Testing of Readiness Codes Your vehicle uses “readiness codes,” as part of its onboard self diagnostic system. Some states refer to these codes during testing to see if your vehicle’s emissions components are working properly. The codes may not be read if you go through the testing just after the battery has gone dead or been disconnected. To check if they are set, set the power mode to ON, without starting the engine. The malfunction indicator lamp will come on for several seconds.
uuEmissions TestinguTesting of Readiness Codes 7. Select a nearby, lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in (D . Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
Warranty Coverages ■ U.S. Owners Your new vehicle is covered by these warranties: New Vehicle Limited Warranty – covers your new vehicle, except for the emissions control systems and accessories, against defects in materials and workmanship. Emissions Control Systems Defects Warranty and Emissions Performance Warranty – these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information.
uuWarranty Coveragesu Replacement Battery Limited Warranty – provides prorated coverage for a replacement battery purchased from a dealer. Replacement Muffler Lifetime Limited Warranty – provides coverage for as long as the purchaser of the muffler owns the vehicle. Restrictions and exclusions apply to all these warranties. Please read the Acura warranty information booklet that came with your vehicle for precise information on warranty coverages.
Authorized Manuals ■ Service Express For electronic copies of service publications, you can purchase a subscription to Service Express. Visit www.techinfo.honda.com for pricing and options. 1Authorized Manuals For Canadian Owners: Please contact a dealer to order any manuals that you may require. ■ For U.S. Owners: Manuals be purchased from Helm Incorporated. You can order a manual by phone at (800) 782-4356 (credit card orders only), or online at www.helminc.com.
Client Service Information Acura dealer personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s service manager or general manager. If you are dissatisfied with the decision made by the dealership’s management, contact Acura Client Relations/ Services. U.S. Owners: American Honda Motor Co., Inc.
Index Index A Defrosting the Windshield and Windows ............................................... 191 Dust and Pollen Filter............................... 431 Rear Climate Control System ................... 192 Recirculation/Fresh Air Mode ................... 190 Sensors.................................................... 196 Synchronized Mode................................. 189 Using Automatic Climate Control ............ 185 Air Pressure ....................................... 418, 481 Airbags ......
B Index 492 Back-Up Light............................................ 411 Battery....................................................... 426 Charging System Indicator ................. 71, 465 Jump Starting .......................................... 460 Maintenance (Checking the Battery) ........ 426 Belts (Seat) .................................................. 31 Beverage Holders...................................... 177 Blind Spot Information (BSI) System........ 361 Indicator .......................
D Starting the Engine.................................. 322 Driving Position Memory System............. 155 Dust and Pollen Filter............................... 431 E Elapsed Time ............................................. 101 Electronic Stability Control (ESC) ............. 358 Emergency ................................................ 475 Emissions Testing (Readiness Codes) ....... 485 Engine ....................................................... 482 Coolant ........................................
Fuel ...................................................... 16, 383 Economy ................................................. 385 Gauge ....................................................... 97 Instant Fuel Economy............................... 101 Low Fuel Indicator ..................................... 73 Range...................................................... 101 Recommendation .................................... 383 Refueling ................................................. 383 Fuel Economy.....
Instrument Panel ........................................ 69 Brightness Control................................... 153 Integrated Dynamics System (IDS)........... 333 IDS Button............................................... 333 Interface Dial ............................................ 203 Interior Lights ........................................... 172 Interior Rearview Mirror .......................... 158 J Jack (Wheel Nut Wrench) ........................ 443 Jump Starting .............................
M Index 496 Maintenance ............................................. 387 Battery..................................................... 426 Brake Fluid............................................... 406 Cleaning.................................................. 432 Climate Control System ........................... 431 Coolant ................................................... 403 Maintenance MinderTM ............................ 391 Oil ...........................................................
S Safe Driving................................................ 25 Safety Check ............................................... 30 Safety Labels ............................................... 67 Safety Message ........................................... 23 Seat Belts..................................................... 31 Adjusting the Shoulder Anchor.................. 35 Automatic Seat Belt Tensioners.................. 33 Checking ................................................... 38 Detachable Anchor ..
Steering Wheel ......................................... 157 Adjusting................................................. 157 Heater ..................................................... 181 Stopping.................................................... 377 Summer Tires ............................................ 425 Sunglasses Holder ..................................... 181 Super Handling-All Wheel DriveTM (SH-AWD®)............................................... 363 Indicator ................................
V Vanity Mirrors .............................................. 5 Vehicle Identification Number................ 482 Vehicle Stability Assist (VSA®) ................. 358 Off Button .............................................. 359 Off Indicator ............................................. 75 System Indicator ............................... 75, 358 Viscosity (Oil).................................... 398, 481 VSA® (Vehicle Stability Assist) ................. 358 W X XM® Radio..............................