Installation Instructions

2
Visteon Electronics Germany GmbH
Sitz der Gesellschaft / Place of Business: Kerpen Geschäftsführung / Management Board Bank: Bank of America Merrill Lynch
Registergericht / Registration Office: Köln, HRB 78269 Jens Tillner Konto Nr. / Account No: 20569017
USt-IDNR. / VAT ID: DE 294 194 802 Jochen Ladwig IBAN: DE96 5001 0900 0020 5690 17
Steuer Nr. / Tax No: 203/5788/1299 SWIFT / BIC code: BOFADEFX
Visteon Electronics Germany GmbH
Visteonstrasse 4-10
D-50170 Kerpen
Germany
[phone]
[phone]
[e-mail]
www.visteon.com
 Check that the connector of the vehicle are not damaged and that no connector wires
are entangled.
 After connection, ensure that the connector is fully and properly inserted into the
corresponding connector socket. Close the connector by its retaining clip.
Antenna cables
Antenna cable is a part of the cable connected to the IC. The length of the antenna cable
varies between 50 cm and 130 cm depending on the vehicle type, antenna type and steering
wheel position. The cable is affixed on skeins or metal girders on the surfaces of the vehicle’s
bulkheads, the specific fixing mechanism is dependent on the vehicle’s model.
Connection Recommendations
 Once laid, cables must not touch any part of the IC casing.
 Once laid, cables must not hamper thermal dissipation from the IC.
 All cables must be protected against wear and tear caused by friction with any parts of
their surroundings.