Installation Sheet

1. Carefully remove all parts from the box.
2. Attach the saddle (F) to the socket cup (G) and secure with socket ring (D).
3. Install harp (C) onto the saddle (F) and secure with handle (E).
4. Adjust harp (C) up or down to get a desired height.
5. Attach the shade (B) to the assembled harp (C) and secure with finial (A).
6. Insert bulb (not included) into the socket.
7. Remove protective plug cover (H) from the plug.
8. Plug into a proper electrical outlet and test the fixture.
9. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Athens Large Table Lamp
Item # BBL 3901
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
DRY
Bulb
(Not included)
F
E
A
B
D
C
G
H

Summary of content (1 pages)