Installation Sheet

1. Carefully remove all parts from the box.
2. Remove the mounting plate (B) from the backplate (F) by loosening side screws (E).
3. Attach the mounting plate (B) to the outlet box and secure with mounting screws (C).
4. Connect the fixture Ground (bare) wire with the ground wire from the outlet box using
wire nut (A). If your house does not have ground wire, then attach this wire to the
green grounding screw inside of the outlet box.
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
5. Connect the fixture Neutral wire (WHITE) with the neutral wire from the outlet box
using wire nut (A).
6. Connect the fixture Hot (BLACK) wire with the hot wire from the outlet box using wire nut (A).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL
BE COMPROMISED.
7. Attach backplate (F) to the mounting plate (B) and secure with side screws (E).
8. Open the frame (G) from the backplate (F) by pulling the handle (D).
9. Insert bulb (not included) into the socket.
10. Close the frame (G) to the backplate (F) by pushing the handle (D).
11. Installation is complete, turn on power at fuse or circuit breaker.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
WITH SILLICONE CAULKING COMPOUND, CAULK COMPLETELY AROUND METAL
BASE MEETS THE WALL SURFACE TO PREVENT WATER FROM SEEPING
INTO J-BOX.
Darlana Mini 3/4 Wall Lantern
Item # CHO 2045
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
WET
L
I
S
T
E
D
C
US
Intertek
CM
A
B
D
G
C
E
F
Outlet Box

Summary of content (1 pages)