Installation Sheet

1. Carefully remove all parts from the box.

2. Remove the metal frame (G) from the backplate (E) by loosening side screws (F).

3. Remove the mounting plate (B) from the backplate (E) by loosening side screws (D).

4. Drill 4 holes on the wall and make sure the hole distance will match to the holes on the

mounting plate (B) exactly.

5. Knock the anchors (N) into the wall holes.

6. Affix mounting plate (B) onto the outlet box and secure with mounting screws (C), then

secure the screws (O) to the anchors (N).

7. Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (usually

BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the

connection with electrical tape.

8. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually

WHITE).

DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL

BE COMPROMISED.

9. Connect ground wire from the fixture (bare copper) to ground wire from the outlet box

(usually green or copper in color).

IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.

10. Attach the backplate (E) onto mounting plate (B) and secure with side screws (D).

11. Insert bulbs (not included) into the sockets.

Caddo Lantern Sconce

Item # JN 2020

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO

REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND

INSTALLATION ARE FINAL.

DAMP

TO assemble safety cables:

1.Join fixture safety cables with safety

cable from wall.

2.Wrap both safety cable around the

cable lock nut.

3.Insert screws into both holes on cable

lock nut,secure screws with screwdriver.

4.Push the cable lock nut into outlet box.

Safety cable

Cable lock nut

PAGE 1
Caddo Lantern Sconce Item # JN 2020 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO REMOVING.
PAGE 2
Caddo Lantern Sconce Item # JN 2020 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO REMOVING.