Installation Sheet

1. Carefully remove all parts from the box.

2. Thread the rod (M) to the top of the light component (T).

3. Attach the connector (L), hook component (K) to the rod (M) and secure with top ring (J).

4. Attach the metal sheet (Q) and glass panel (P) to the metal frame (S) and secure with

rubber washer and nut (O & R).

5. Attach the metal sheet (V) and glass panel (U) to the metal frame (S) and secure with

rubber washer and nut (O & R).

6. Hang the rod (N) one end to the hook component (K), one end to the metal frame (S).

7. Put the mounting plate (C) on the ceiling and mark the holes position with pencil.

8. Drill 4 holes on the ceiling and knock the expansion pipes (B1) and screws (B) onto the

ceiling holes and make sure they are flat.

9. Install the mounting plate (C) with ceiling loop (E) to the outlet box by mounting screws

(F) provided, then secure the screws (B) by mounting nuts (D) provided.

10. With the fixture desired height, shorten the chain (I) as needed using a pair of chain

pliers.

11. Open the chain quick link, then attach the chain quick link to the top ring (J). Secure the

chain quick link.

12. Let collar ring (H) and canopy (G) go through the chain (I).

13. Open the chain quick link, then attach the chain quick link to the ceiling loop (E). Secure

the chain quick link.

14. Weave the power supply cord and the ground wire through the chain (I).

Caddo Medium Linear Lantern

Item # JN 5023

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO

REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND

INSTALLATION ARE FINAL.

DAMP

TO assemble safety cables:

1.Join fixture safety cables with safety

cable from ceiling.

2.Wrap both safety cable around the

cable lock nut.

3.Insert screws into both holes on cable

lock nut,secure screws with screwdriver.

4.Push the cable lock nut into outlet box.

PAGE 1
Caddo Medium Linear Lantern Item # JN 5023 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. TO assemble safety cables: 1.Join fixture safety cables with safety cable from ceiling. 2.Wrap both safety cable around the cable lock nut. 3.
PAGE 2
Caddo Medium Linear Lantern Item # JN 5023 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. TO assemble safety cables: 1.Join fixture safety cables with safety cable from ceiling. 2.Wrap both safety cable around the cable lock nut. 3.