Installation Sheet

ASSEMBLY INSTRUCTIONS Fascio Large Floor Lamp

Item# LR1900

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION .

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL.

IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO REMOVING.

RETAIN ALL PACKING MATERIAL UNTILL INSPECTION AND INSTALLATION ARE FINAL.

Carefully remove all parts from the box.

Insert the 8pcs short crystal bars(E) into the holes of fixture(D).

Install the octagonal ring (F) into the fixture (D).

Assemble the plug (H) from LED tube(J) to the plug (G), install the LED tube (J) into fixture (D),secure

with screws (I).

Insert the 8pcs long crystal bars(K) into the holes of fixture(D).

Thread down the the octagonal ring (L) to the 8pcs long crystal bars(K), then put dwon the rubber

washer (M) and circle piece (N),lock with finial (O).

Assemble the plug (C) to the driver (B).Put the plug (A) into a proper electrical outlet.

Installation is completed, turn on power at fuse or circuit breaker.

***

Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.

PAGE 1
ASSEMBLY INSTRUCTIONS Fascio Large Floor Lamp Item# LR1900 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION . INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO REMOVING.