Installation Sheet

ManualsBrandsVisual Comfort ManualsChandeliersRalph Lauren Roark 16 Light 30" Wide Chandelier

ASSEMBLY INSTRUCTIONS

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Connect one end of support rod (H) to eyelet (J) on ﬁxture body (K). Connect

the other one end of support rod (H) to center hub (G).

2. Repeat step 3 for remaining two support rods (H).

3. Open the quick link (E) on one end of the chain (F) and attach to top loop on

center hub (G).

4. Determine correct length of chain for desired hanging height. Using pliers,

open chain link and remove unnecessary chain.

5. Open the quick link (E) on other of chain (F) and connect to mounting loop (C).

6. Unscrewing the canopy ring (D) from chain mounting loop (C) and slide canopy

(B) and canopy ring (D) on chain.

7. Connect the safety steel wire from the ﬁxture and the safety cable from ceiling

with lock nut. (See illustration A)

8. Attach chain mounting loop (C) to thread nipple (A) using the ceiling loop

screw. Gently pull outlet box wires to hang.

9. Thread wire from center hub (G) through chain, and into the hole in the center

of canopy (B).

10. With another person supporting the weight of the ﬁxture, connect the electrical

wires to the outlet box wires as shown in Fig.1.

11. Wrap all connections in electrical tape for additional protection. Tuck all wires

neatly into the electrical box.

12. Insert top thread nipple (A) in mounting 1/4 IPS PIPE.

13. Slip canopy (B) to ceiling and secure with threaded canopy ring (D).

14. Insert bulbs (not included) into sockets.

15. Reconnect power and test operation of ﬁxture. Installation is now complete.

Roark 30” Modular Ring Chandelier

Item # RL5131

FIXTURE

WIRES

HOUSE

WIRES

HOUSE

WIRES

FIXTURE

WIRES

FIXTURE

WIRES

HOUSE

(b)

(a)

(c)

Illustration A:

FIG 1

Black or

Smooth

White or

Ribbed

White

(Neutral)

Green or

Bare Copper

(Ground)

Green or

Bare

Copper

(Ground)

Black

(Hot)

DRY