Installation Sheet

S2210

ASSEMBLY & INSTALLATION GUIDE

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Take off the two screws A from the back-plate B.

2. Install C to the wall with wood screws or outlet box screws.

3. Connect the electrical wires making sure all wire nuts are secured. You may have to wrap the connections with

electrical tape. If your junction box has a ground wire (green or bare copper), connect the ﬁxture’s ground wire to it.

Otherwise connect ﬁxtures ground wire directly to the junction box.

4. Secure the ﬁxture with two mounting screws A to C, then tighten them.

5. Insert a light bulb (Not included) into socket.

6. Put the shade on the candle tube

7. Return the power and test your ﬁxture.

Fig.1

Fig.2

FIXTURE

WIRES

Green or Bare

Copper

(Ground)

FIXTURE

WIRES

White or

Ribbed

FIXTURE

WIRES

BLaCK or

Smooth

HOUSE

WIRES

Green or

Bare Copper(Ground)

HOUSE

WIRES

white

(neutral)

HOUSE

WIRES

BLaCK

(HOt)