Installation Sheet

1. Install harp (C) onto the saddle (D).

2. Place shade (B) to the harp (C) and secure with finial (A).

3. Handle (E) can adjust the legs angle.

4. Insert bulb (not included) into the socket.

5. Remove protective plug cover (F) from the plug.

6. Plug into a proper electrical outlet and test the fixture.

7. Installation is complete.

***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.

TRIPOD FLOOR LMP

Item # SL1700

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO

REMOVING. RETAIN ALL PACKING MATERIALLY UNTIL INSPECTION AND

HINSTALLATION ARE FINAL.

DRY