Installation Sheet

SP1003

ASSEMBLY & INSTALLATION GUIDE

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Carefully remove all parts from the box and remove all plastic covering.

2. Insert harp (C) into the two-pronged saddle (F) as shown.

3. Lower harp caps (D) so that they cover the two-pronged saddle (F).

4. Remove ﬁnial (A) from harp(C).

5. Place lamp shade (not included) over harp nipple (B) so that the nipple protrudes through the opening.

6. Attach ﬁnial (A) to harp nipple (B) and turn clockwise to secure.

7. Insert bulb (not included) into socket (E).

8. Remove red protective plug cover (I) from plug (H).

9. Plug into proper electrical outlet and test ﬁxture.

10. Assembly is complete.

11. CARE INSTRUCTIONS:

Avoid the use of all polishers, cleaners, and abrasives, as they will damage the ﬁnish of your lamp.

To remove dust or ﬁngerprints, wipe gently with a soft, clean cloth.