Installation Sheet

1. Carefully remove all parts from the box.
2. Thread the tube (D) to the tube (E).
3. Place shade (B) on the socket (C) and secure with ring (A).
4. Insert bulb (not included) into the socket.
5. Remove protective plug cover from the plug.
6. Plug into a proper electrical outlet and test the fixture.
7. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Hackney Floor Lamp
Item # SP1022
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
DRY
A
B
C
D

Summary of content (1 pages)