Manualshelf

Installation Guide

ManualsBrandsVisual Comfort ManualsLampsHackney 52" Bridge Arm Floor Lamp with Natural Paper Shade by J.Randall Powers
1
1. Carefully remove all parts from the box.
2. Unsrew the ring (C) from the socket (A).
3. Place shade (B) on the socket (A) and secure with ring (C).
5. Remove protective plug cover from the plug.
6. Plug into a proper electrical outlet and test the fixture.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Hackney Bridge Arm Floor Lamp
Item # SP1023
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
　　
DRY
ASSEMBLY INSTRUCTIONS
INSTALLATION ARE FINAL
REMOVING. RETAIN ALL PACKING MATERIALLY UNTIL INSPECTION AND
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
7. Installation is complete.
4. Insert bulb (not included) into the socket (A).

Summary of content (1 pages)