Installation Sheet
ASSEMBLY INSTRUCTIONS
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1. Carefully remove all parts from the box and remove all plastic covering.
2. Thread lower column (B) into base(A).
3. Put the harp on and fixed by using socket ring (E).
4. Insert bulb (not included) into socket (E).
5. Insert shade (F) to thread (D) & tighten with finial (G)
6. Remove red protective plug cover (I) from plug (H).
7. Plug into proper electrical outlet and test fixture.
8. Assembly is complete.
DRY
Hargett Bridge Arm Floor Lamp
Item # SP1505