Installation Sheet

SP3015

ASSEMBLY & INSTALLATION GUIDE

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Carefully place the cross part assembly (E) on glass cylinder (F). Note: if one side of glass cylinder DOES NOT ﬁt in

cross part (B), DO NOT TRY TO FORCE IT. Please turn it over, try to ﬁt another side in.

2. Loosen adjustment knobs (C), insert both sides of harp (B) into top opening of harp (D) and secure with adjustment

knobs (C).

3. Remove ﬁnial (A) from harp (B), place lamp shade (not included) over the bolt attached on top of harp (B). Screw

ﬁnial (A) onto the bolt to secure shade to harp (B).

4. Screw light bulb into socket.

5. Remove protective plastic (H) from electrical plug (G). Plug lamp into wall outlet.

6. ADJUSTMENT INSTRUCTIONS:

1. Loosen adjustment knobs (C) on both sides of harp (B)

2. Adjust harp (B), up or down, to get desired height. The socket should not show under shade when the harp is

adjusted correctly.

3. Tighten the adjustment knobs (C).