Installation Sheet

ASSEMBLY INSTRUCTIONS

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Remove all parts carefully from the carton.

2. Remove white plastic bushing from bottom threaded hole of pole (D) before

assembling.

3. Thread top nipple of base (E) into bottom of pole (D).

4. Insert harp (B) into harp saddle (C) by squeezing both sides of the harp.

5. Remove ﬁnial (A) from harp (B). Place lamp shade onto the bolt attached on

the top of harp. Screw ﬁnial (A) onto bolt to secure lamp shade to the harp.

6. Insert light bulb (not included) into socket.

7. Remove protective plastic (G) from electrical plug (F).

8. Plug lamp into wall outlet.

ADJUSTMENT INSTRUCTIONS

1. Loosen adjustment key found on lamp stem.

2. Adjust height to desired position.

3. Tighten the adjustment key.

DRY

Bryant Floor Lamp in Antique Silver

Item # TOB1002