Installation Sheet

TOB1200

ASSEMBLY & INSTALLATION GUIDE

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Join parts (E), (F) & (G) together by tightening washers (H), (J) & nut (K) to threaded rod at bottom of pole (E).

Tighten with box wrench (L) provided.

2. Slide shade (A) onto socket housing (B).

3. Insert light bulb into socket.

4. Remove protective plastic (M) from electrical plug (N).

5. Plug lamp into wall outlet.

6. ADJUSTMENT INSTRUCTIONS:

1. Loosen the adjustment key (D).

2. Adjust lamp by pulling or pushing lamp pole (C) up or down to desired height.

3. Tighten the adjustment key (D).

PAGE 1
TOB1200 ASSEMBLY & INSTALLATION GUIDE INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. 1. Join parts (E), (F) & (G) together by tightening washers (H), (J) & nut (K) to threaded rod at bottom of pole (E). Tighten with box wrench (L) provided. 2. Slide shade (A) onto socket housing (B). 3. Insert light bulb into socket. 4. Remove protective plastic (M) from electrical plug (N). 5.