Installation Sheet

ASSEMBLY INSTRUCTIONS

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Remove mounting plate (B) from ﬁxture base (E) by loosening the side screws

(D).

2. Afﬁx mounting plate (B) onto outlet box and secure with mounting screws (C).

3. Connect the hot wire from the ﬁxture (BLACK) to the hot wire from the outlet

box (usually BLACK).

4. Fasten together with a plastic wire connector (A) provided and wrap

connection with electrical tape.

5. Repeat this procedure for the WHITE neutral wire from the light ﬁxture to the

wire from the outlet box (usually WHITE).

6. Connect ground wire from the light ﬁxture (GREEN or bare copper) to ground

wire from the outlet box (usually green or copper in color).

DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY

WILL BE COMPROMISED

7. Attach ﬁxture base (E) to mounting plate (B), and secure with the side screws

(D).

8. Insert light bulbs (not included) into socket.

9. Install the shade (H) to the ﬁxture body and secure them tightly with the screw

(F) by use hexagon (F) provided.

10. Installation is complete.

Venice Sconce

Item # TOB2221

PAGE 1
ASSEMBLY INSTRUCTIONS Venice Sconce Item # TOB2221 WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. 1. Remove mounting plate (B) from fixture base (E) by loosening the side screws (D). 2.