Installation Sheet

Cosmopolitan 30" Picture Light
Item #TOB2623
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/
CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION
ARE FINAL.
1. Carefully remove all parts from the box.
2. Guide wiring from wall outlet through centre hole in mounting plate (B).
3. Affix mounting plate (B) to wall outlet box with mounting screws (C).
4. Measure the distance of the key holes(F) on the lamp body, drill two holes with same
distance on the wall, insert the plastic anchors to the holes, thread the screw (E) to the
anchors.
5. Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box
(usually BLACK). Fasten them together with a plastic wire connector (A) provided and
wrap the connection with electrical tape.
6. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet
box(usually WHITE). Fasten them together with a plastic wire connector (A) provided
and wrap the connection with electrical tape.
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR
SAFETY WILL BE COMPROMISED.
7.Connect ground wire from the fixture (bare copper) to ground wire
from the outlet box (usually green or copper in color).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
8.Attach lamp body to the screws (E) and affixed mounting plate (B), secure with fixing
screw (G).
9.Install bulb (not included) to the socket.
10.Installation is complete, turn on power at fuse or circuit breaker.
***Clean with a dry, soft cloth only.Use no harsh abrasives or chemical agents.
DRY