User guide

Dual Tap Delay

- sample settings -

There are an endless variety of settings to experiment with and use with

the Visual Sound Dual Tap Delay. Here are just a few to get you started.

As you will soon find out, there is really not a bad setting to be found with

this pedal. Enjoy!

Edgy Dual Delay

Ricochet Delay

Rolled Off Tap Delay

Chorus Verb

Internal Switches: (Remove bottom cover to see internal switches)

Effect – Buffer: For Output 2 only. Changes Out 2 from parallel effect (same as Out 1) to Dry

signal from input buffer circuit. Stock setting: Effect

Trailing – No Trailing: In Trailing mode, allows delayed repeats to continue after turning off

channel(s). In No Trailing mode, delayed repeats are cut off when channel(s) is turned off.

Stock setting: No Trailing

NOTE: You must re-tap the tempo after changing Time Division or switching from Manual mode.

www.VisualSound.net

ver. 2011 0726

PAGE 1
ver. 2011 0726 Dual Tap Delay - sample settings - There are an endless variety of settings to experiment with and use with the Visual Sound Dual Tap Delay. Here are just a few to get you started. As you will soon find out, there is really not a bad setting to be found with this pedal. Enjoy! Edgy Dual Delay Ricochet Delay Rolled Off Tap Delay Chorus Verb Internal Switches: (Remove bottom cover to see internal switches) Effect – Buffer: For Output 2 only.
PAGE 2
Jack Panel Input: Guitar or effect input Out 1: Mono output Out 2: Output to second amp (effected or dry – internal switch selectable) Ext. Tap or Click Input: External tap tempo switch or Visual Sound External Click Track Converter input.
PAGE 3
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.