VITA-MIX CORPORATION , Mix n Machine ™ OWNER'S MANUAL ,n x hine i M c Ma EN OZ FR R XE MI T ER SS E D VITA-MIX ® F O O D S E R V I C E , n x M ic h i n e Ma T ER SS DE EN OZ FR R XE MI VITA-MIX ® F O O D S E R V I C E Vita-Mix Corporation • Foodservice Division 8615 Usher Road Cleveland, OH 44138 (440) 235-4840 • (800) 43
Thank you for purchasing the , Mix n Machine™ by Vita-Mix®! THE "MIX'N MACHINE” MIXER COMBINES A FAST STRONG INDUCTION MOTOR WITH DIFFERENT STYLES OF SAFE PLASTIC AGITATORS. BY RAPIDLY MOVING THE CUP UPAND AROUND THE AGITATOR, A THOROUGH MIXING JOB CAN BE ACCOMPLISHED IN AN AVERAGE OF 10 SECONDS. THE HAZARDOUS STAINLESS STEEL AGITATORS OF OTHER BRANDS, (USED IN THE CENTER OF THE CUP TO AVOID CUTTING CUPS AND HANDS), TAKE MUCH LONGER TO DO THE SAME JOB.
FIVE YEAR LIMITED PARTS ONLY WARRANTY IMPORTANT SAFEGUARDS This appliance is guaranteed to operate satisfactorily for a period of five (5) years from the date of purchase, when used in accordance with the instruction manual. This guarantee does not apply in cases of tampering, misuse, abuse, fire, flooding, or other abnormal conditions.
INTRODUCTION PERMANENT AGITATOR SHAFT ALIGNMENT Mixing various candies, cookies, fruits, nuts, liquid flavors and other food items into ice cream or frozen yogurt has made unlimited different combinations of flavors and textures available with only one freezer or starting flavor. The Agitator shaft extension (#SCM-800) is threaded onto the end of the motor shaft with slinger (DDR-800) sandwiched between (Right handed thread).
MIX'N MACHINE PARTS LIST PARTS LIST Diag am# I em# M1 801 M2 800 M4 M6 801 M7 M8 800 M9 801 M10 800 M11 800 M12 M13 800 M23 Q De c iw ion Pa o 1 Stainless Steel Frame A S Y- 1 Induction Motor (120 V) with Capacitor A S Y- 1 2 Cap Jumper Wires PLS-801 W I R- 3 1 Cap Retaining Screws Snap in Rocker Switch FST-801 C T L- 1 5 Amp Circuit Breaker (120 V) C T L- 1 Cord - U.S.
MIXING PROCEDURE 1. Put soft serve product into a serving cup along with ingredients such as liquid flavoring, and ground solids such as candy, coolies, fruit or other condiments. 2. Snap on mix-through collar. Slide power mixing spoon up onto the shaft until it snaps into place. (Disposable spoon units only.) 3. Mixing procedure for hard ice cream: Use cup holder or use sturdy cup to prevent the agitator from going through the side of the cup.
CLEANING INSTRUCTIONS PRESSURE SWITCH PERMANENT AGITATOR: Blue 1. Fill a durable square or rectangular container to within 1” of the top with hot (110˚F) water containing Ivory liquid detergent (1 oz. per qt.). The container must be deep enough to submerge the entire agitator and the shaft. Blue Yellow Brown 2. Hold the container up around the agitator and shaft, all the way up to the bottom of the motor chamber, and turn the mixer on. Run for about 15 seconds. Repeat several times.
FOOT CONTROL INSTRUCTIONS MOUNTING INSTALLATION To use the momentary foot switch to control the mixer, plug the foot control provided into a grounded outlet. Plug the mixer cord onto the back of the foot control plug. In this mode, both switches must be on to run the mixer. Leave the mixer switch turned on during periods when you wish to use the momentary foot control. Make sure the foot control is kept where it will not be activated accidentally.