Operating instructions

9 VITA SPA DUET
SPA COMPONENTS
Reference only. Equipment is not always as shown
A. Pumps, : Low speed for e cient water
circulation during  ltration and heating;
high speed for maximum action of the
jets. The pump functions are activated by
topside controls
B. Warning and Installation Label:
Contains important safety information
and installation instructions.
C. Slice Valve: Used to shut o water  ow
from the spa to the equipment while
servicing. Quantity will vary depending
on model. All should be open during
normal operations.
D. Spa Pack: Houses the electronic circuit
board. All equipment and incoming power
connections are made here .
E. Heater Assembly: Thermostatically
controlled and equipped with an
overheat safety shut-o .
Note: No consumer serviceable parts.
Do NOT attempt to service any of these
components yourself. Contact your dealer
for assistance.