Operating instructions

24 VITA SPA DUET
encasement in the sun and foam cores in the
shade to dry. (Do not put foam cores in the
sun – they will melt!)
Once everything is dry, spray the cores and
inside the encasement with a mildew inhibitor
like Pine Sol®. Allow all to dry completely, and
then reassemble. The key here is to maintain
proper water chemistry to avoid mildew.
If you are using WD-40 to free the Sure-Locs,
try using a Q-tip to keep the WD-40 away from
your cabinet. (It can damage the  nish.)
Thermal Creep
Your Vita spa is manufactured with energy-
e cient components and systems that
capture heat generated by the equipment,
then transfer that heat back to the spa water.
In warmer climates or in situations with
extended run times, “Thermal Creep” may
occur. Thermal Creep is a condition whereby
the actual water temperature is higher than
the set temperature.
To manage “Thermal Creep” you may:
 Vent your cover
 Open the air control
 Set your  ltration cycles to run during the
cooler times of the day or at night
 Reduce the length of your  lter cycles
 Visit your local Vita Spa distributor for
additional guidance
Thermal Creep only occurs in well-insulated
hot tubs. It is not an indication that
something is wrong with your spa or its
equipment