Owner`s manual

PAGE 19
E. VITA TUNES
Country Code Setting
Advance the programming sequence to
the minute set position.
Hold down the “PROG” for 5 seconds
and observe that the screen shows CO=X
(where X is either U for USA, E for Europe,
or J for Japan)
Use the “UP” or “DOWN” buttons to
change the country, as required
S tereo Access and Volume Control
To access the stereo, press “UP” and
“DOWN” buttons on the spa control pad
simultaneously. The stereo will turn on,
and you will automatically be taken to the
volume control.
Your volume range is L0 through
L8(L=00 equal off and L=08 is the
loudest).
To adjust the volume level press “UP” or
“DOWN” arrows.
Bass
While in the volume mode, press
“PROG”
Bass range is B00 through B008
Frequency Source
From Bass Mode, press “PROG” to select
source.
S=A equals A.M., S=F equals F.M., S=L
equals line input.
After source is selected, press “PROG” to
exit selection or use “UP” or “DOWN”
keys to scan stations.
In S=L you can connect optional Vita CD
p l a y e r, or any other personal stereo
device, such as a walkman or MP3.
The “PROG” button can be pressed to
escape the stereo mode.
F. DIGI-CHROMIUM (Optional)
The Digi-Chromium option is activated by
pressing the Light button on the spa side
control.
To program the lights, press and hold the
Light button for 5 seconds.
Once the display reads L=XX, release the
button.
Using the arrow buttons, you may select
the different settings.
Review each setting to determine which
is best suited for you. The selection may
be changed at any time by repeating the
previous steps.
L=00 Off
L=01 Diamond
L=02 Blue
L=03 Green
L=04 Red
L=05 Strobe effect Red/Green/Blue
L=06 Gradual change Red/Green/Blue
L=07 - 10 Combination Colors
L=11 - 20 Reduce Intensity 50%
L=21 - 20 Reduce Intensity 75%
The lighting system will automatically turn
itself off after three (3) hours.