Owner`s manual

PAGE 31
(A ) SELEC T — A — S W IRL™ JETS
The water flow direction is adjustable by rotating
the directional jet nozzle. The amount of pressure
can be adjusted by rotating the outer rim of
the jet(s) clockwise for minimum pressure and
counter–clockwise for maximum pressure.
Pressure may also be varied by the use of the
air control.
This jet can be removed for cleaning by turning the
outer ring counter–clockwise until you feel it stop.
Then slightly apply pressure in the same direction
to overcome the “stop”. The jet can then be pulled
out of the jet body for cleaning. To install the jet,
i n s e rtthe jet back into the body and turn clockwise.
(B) PULSATOR JETS
Interchangeable with SELEC T– A – S W IRL™ and
Q UAD ST REAM™ jets. Water pressure can be
adjusted by rotating the outer rim of the jet(s)
clockwise for minimum pressure and
counter–clockwise for maximum pressure.
Pressure may also be varied by the use of the air
c o n t r o l .
This jet can be removed for cleaning by turning the
outer ring counter–clockwise until you feel it stop.
Then slightly apply pressure in the same direction
to overcome the “stop” . The jet can then be pulled
out of the jet body for cleaning. To install the jet,
i n s e rtthe jet back into the body and turn clockwise.
JET OPE R AT I O N
Your Vita Spa is designed with a unique jet system to allow you to select a wide variety of massage patterns.
The following is a description of the various types of jets and their operation you may use to tailor your spa
to your specific massage needs.
(C) QUAD STREAM™
Interchangeable with SELECT—A—SWIRL™ and
PULSATOR JETS. It is one powerful jet, whose
force, redirected into four different directions,
results in strong, even vibrations to soothe those
overworked calf muscles.
(D) TURBO JET
The Turbo Whirlpool Jet is not individually
adjustable. To adjust the flow, you must open or
close air control valve.
The Turbo Whirlpool Jet utilizes a high flow design
to create a powerful whirlpool current throughout
the spa. It's great for working out the hard to relieve
knot. For cleaning purposes, the Turbo Jet face can
be removed by turning the face counter clockwise.
Re-install by pushing the face in and turning
c l o c k w i s e .
(E) THRE E — WAY POWER DIVERTER
VA LV E
This valve is functional when the primary or
s e c o n d a r y, two-speed pumps are operating. Wa t e r
may be diverted to two individual sections of jets
or a combined operation of both sections.
Do not adjust when pump is set at high speed.
(F) CLU STER JET
These jets work as a team, that’s why they’re
usually found in groups of two or more. They can
deliver vigorous pinpoint action for a therapeutic
effect, or you can turn into soothing massage
with just a twist of your finger.