Owner`s manual

WINTERIZING YOUR SPA
Yo ur Vi t a S pa h as b e en d esi gne d a n d e ngi n e e r e d
for year-round use in any climate. If the spa will not
be used for prolonged periods of time, contact
your local authorized service station to properly
drain and protect your spa.
EXCEL-PLUS CABINET MAINTENANCE
The exterior of your Vita Spa cabinet is made from
a newly formulated high strength material that is
factory stained and sealed. Depending on the
location and exposure of the spa to nature’s
elements, it is recommended that you clean the
cabinet once or twice a year with warm water and
a mild soap.
COVER MAINTENANCE
Your cover is manufactured from a durable marine
grade, UV resistant material. Even so, monthly
cleaning and periodic conditioning is
recommended to maintain its beauty. To clean
and condition the vinyl cover: Lightly spray the
cover with a garden hose to rinse it and remove
the debris. Using a large sponge or soft cloth and
a mild soap solution (1 teaspoon dish washing
liquid with 2 gallons of water), scrub lightly in
circular motion. Then rinse it thoroughly with
plenty of water. Condition the vinyl after cleaning
by applying a thin film of vinyl conditioner. NOT E :
To remove tree saps, use lighter fluid (not charcoal
lighter but the kind used in cigarette lighters).
Use sparingly and rinse with mild soap solution
afterwards. Wipe dry.
CARE OF ACRYLIC SURFACE
To maintain the surface of your spa, simply clean
with a soft damp cloth (a mild detergent is okay)
or with any glass cleaner. DO NOT clean the
s u rface with any type of abrasive as it will dull the
s u rface and natural luster of the acrylic. DO NOT
use any type of oil based solvent. Such products
can be very harmful to the surface of the spa and
will void the surface warranty of the spa.
S PA LIGHT CO LO RED LENS RE M OVA L
In your owners packet you will find colored lenses
for your spa light. They can easily be installed or
removed by placing them over the spa light and
gently pushing on the outer edges to install and
pulling along the edges to remove.
LIGHT BULB REPLACEMENT
1. Turn off the power to the spa.
2. Remove the front panel of the spa.
3. Locate the spa light.
4. Turn the bulb counter - clockwise 1/4 turn to
remove from its socket
5. The replacement bulb is locked into place
by turning it clockwise 1/4 turn
6. Close up the cabinet and turn the power
back on.
7. Check the Top Side display and adjust the
time.
CARE OF SPA PILLOWS
The spa pillows will provide years of comfort if
treated with care. Each pillow has been positioned
above the water level to minimize the bleaching
effects of chlorinated water and other spa water
chemicals. It is recommended that pillows be
removed and cleaned each time the spa itself is
cleaned. A mild soap and warm water works best
in removing body oils. ALWAYS rinse the pillows off
thoroughly after applying any type of soap to
assure that no residue remains. If you are
winterizing your spa or do not plan on using it for
a while, it is best to remove the pillows until the
next use. Pillows should always be removed
whenever the spa is being superchlorinated.
PAGE 36
S PA MAIN T E N A N C E
S PA L I G H T
LIGHT BUL B