Owner`s manual

7
SPA FROG: This is our primary sanitizer and has proven to be our most popular customer choice. It
allows the customer to sanitize the spa and oxidize organic waste at a minimum of effort, allowing you to
enjoy the spa with less work. It is available as a floating system that you simply set out of the spa when
you are using it. It relies on a Mineral chamber that lasts four full months and a bromine chamber that
lasts between 3-4 weeks on average. The two components work together to give you the cleanest water
possible at the least amount of work. Just follow the directions on the container for normal use, but use
these simple steps to active the system:
1.! Fill spa and let water reach at least 95 degrees. DO NOT ADD MINERAL ELIMINATOR.
2.! Add 1 ounce of #1 Disinfectant.! ! !
3.! Wait 24 hours.
4.! Set the blue chamber to #6 (simply rotate the unit and
view the number printed on the side slot). Set the
yellow chamber on #5.
5.! After 24 hours, on spas over 250 gallons turn the yellow
cartridge down to #3. On spas less than 250 gallons,
turn to #1 or slightly less.
6.! Shock 1-2 times weekly with #2 Oxidizer.
7.! Test your water twice weekly and make sure all your
levels are in balance.
If you have just had a party or there have been lots of people
in and out of your spa, add a second doze of #2 Oxidizer after
it is over.
Clean Water
While Balanced Water is determined by pH, total alkalinity, and calcium hardness, Clean Water is
determined by the spa's sanitizer. When we talk about clean water, we are referring to more than just
water that looks nice. We are referring to water that is safe for the users of the spa. Clean water is free
of both visible debris as well as invisible debris like bacteria.