Owner`s manual

17
Filtration
The filter of your spa is one of the most important components to the spa and should be cleaned on a
weekly basis. Fortunately, this is a very simple task. There are three specific housings and filter styles
sold on spas at Eastgate Pools. The following are the steps you will need to take, depending on the style
of filtration that your spa is equipped with.
REFLECTIONS-SKIMMER HOUSED FILTRATION
!1. ! Remove the skimmer face plate by lifting straight up.
!2.! Remove the skimmer basket. It slides straight out.
!3.!Unscrew the filter by turning counter-clockwise.
!4.!Use White River FC-5 Filter Cleaner, per product directions.
!5.! Replace the basket, making sure it slides into the grooves inside the housing.
!6.! Slide the faceplate back over the tabs.
REFLECTIONS-OPEN FILTRATION
!1.! Simply lift the tray cover and unscrew the filter(s).
! 2.! Unscrew the filter, turning counter-clockwise
! 3.! Use White water FC-5 Filter Cleaner, per product instructions.
! 4.! Replace the filters and the cover tray.
SOUTH PACIFIC FILTRATION
!1.! Lift the plastic housing out of the spa.
!2.! Gently remove the filter by lifting straight up or unscrewing.
!3.! Use White River FC-5 Filter Cleaner, per product directions.
!4.! Replace the filter