Owner`s manual

24 VITA SPA
ENGLISH FRANÇAIS
when the set temperature is locked.
Temperature Unlock
To unlock the temperature, touch either
‘UP’ or ‘DOWN’, then touch ‘TIME’, ‘JETS 1’,
and ‘DOWN’ within 3 seconds. The ‘TL’
indicator light will go out when the set
temperature lock is cleared.
Panel Lock (PL)
To help prevent unauthorized use of your
spa, the control system has a unique panel
locking system. To lock the panel, touch
‘TIME’, ‘JETS 1’, then ‘UP’ within 3 seconds.
When locked, the ‘PL’ indicator light will be
on. Except for the time button, everything
will be frozen. When the control panel lock
is engaged, all automatic spa functions will
operate normally but cannot be altered.
Panel Unlock
To unlock the panel, touch the ‘TIME’,
‘JETS 1’, and ‘DOWN’ within 3 seconds.
The ‘PL’ indicator light will go out when the
panel lock is cleared.
Operating Modes
Your Vita Spa comes with three
primary operating modes.
Standard Mode maintains the water at
the desired set temperature. Note that the
last measured spa temperature displayed
is current only when the pump has been
running for at least 2 minutes. The ‘STD’ icon
will be brie y displayed in the LCD window
when this mode is selected. The word
standard will constantly be displayed on the
panel
Economy Mode heats the water to the
desired set temperature ONLY during  lter
JETS 3
Touch the ‘JETS 3’ pad to activate the therapy
pump in conjunction with the sequencer.
The sequence of jet action is:
1 touch = High therapy jets
2 touches = O
The low speed operation of Pump 1 is timed
to automatically turn o after two hours of
operation. The high speed operation of Pump 1
and Pumps 2 & 3, are timed to automatically
turn o after 15 minutes of operation.
The low speed of Pump 1 runs when the
blower or any other pump is on. In the
STANDARD mode it will also activate for at
least 2 minutes every 30 minutes to detect
the spa water temperature and then remain
on to heat to the set temperature if needed.
When this automatic activation occurs, the
low speed of Pump 1 cannot be turned o ;
however, all other control functions can be
activated.
Light
Touch the ‘LIGHT’ pad to turn all lights on and
o . The lights will automatically turn o after 4
hours of operation.
Spa Control Locks
The corresponding lights on the spa panel
will illuminate to show the spa control locks
or  lter cycles that are currently active.
Temperature Lock (TL)
Once you have set the desired water
temperature, you may lock-in the new
setting to prevent unauthorized
temperature adjustments to your spa.
To lock the set temperature: Touch ‘UP’ or
‘DOWN’, then touch ‘TIME’, ‘JETS 1’ and ‘UP’
within 3 seconds. The ‘TL’ indicator will light