Owner`s manual

36 VITA SPA
ENGLISH FRANÇAIS
Sequencing Speeds
When  rst energized, the sequencing program
will automatically go to the default speed,
or ‘S1’. To change the sequencing speed,
push the ‘SPEED’ button once. The LCD will
momentarily display the selected speed (S1,
S2, or S3), and then alternately display the
current program and the sequencing speed.
Pausing
To pause the sequencing action of the system
at any point, simply press the ‘PAUSE’ button.
This will suspend the operation of the valves
and hold them either until the sequence is
resumed or until the system is de-energized.
The LCD display will alternate between ‘PA’
and the current program number. Press the
‘PAUSE’ button again to resume normal
operation.
Therapy Sequencer
Certain models are equipped with a Jet
Sequencer System that opens and closes a
series of four solenoid valves to provide a
therapeutic sequencing massage.
The control panel for the system allows you
to start or stop operation, change programs,
change speeds, or pause the system at any
point in the program.
Starting the Sequencer
To energize the sequencing system, press the
‘JETS 3’ button on the topside control panel.
Once energized, the sequencer will open all 4
solenoid valves and water will  ow through all
open jets. Two dashed lines will be displayed
in the LCD window.
Push the ‘ON/OFF’ button one time and the
LCD display will now show ‘On’. This indicates
that the system has been activated, but no
changes will occur until a sequencing program
has been selected.
Sequencing Programs
To start the sequencing program, push
the PROG button one time. The LCD will
momentarily display ‘P2’, and then alternate
between ‘P2’ and ‘S1‘’. The system is now
running program 2 and sequencing speed 1.
To change programs, push the ‘MODE/PROG’
button to step through the programs. The LCD
will momentarily display the selected program
(P3, P4, P5, etc.), and then alternately display
the selected program with the sequencing
speed. Refer to the Therapy Sequencer chart
to see the order in which the valves will open
and close for each program.
Pad Use
ON/OFF
• Activates the Sequencer
PROGRAM
• Navigates between the nine
therapy sequencer programs
SPEEDS
• Navigates between the three
therapy sequencer speeds
PAUSE
• Pauses the therapy sequencer