Owner`s manual

PAGE 28
MONDAY
1. TEST THE WATER USING
“3-WAY SPA WATER TEST STRIPS”.
2. Adjust pH and total alkalinity -
Refer to pH and total alkalinity on
label of “PH-UP” and “PH-DOWN”.
3. Maintain 1.0 to 3.0 ppm Bromine
or free Chlorine.
4. Add 1 ounce of “METAL SURFACE
PROTECTOR” to prevent calcium
build up.
5. Shock treat with 2 ounces
of “POTASSIUM PEROXY
MONOSULFATE”, a nonchlorine
shock, every week as needed.
WEDN
ESDAY
1. Nothing required if Bromine is
used as sanitizer. Check and
adjust Chlorine level if Chlorine
is used.
F
RIDAY
1. Nothing required if Bromine is
used as sanitizer. Check and
adjust Chlorine level if Chlorine
is used.
BALANCING THE SPA WATER
3 DAY A WEEK SPA CARE PROGRAM
Note: The above table is an
example only. Actual spa usage
will determine the amount of
chemicals required to maintain
proper chemical balance.
TOO ALKALINE
SCALING ZONE
COMFORT ZONE
TOO ACIDIC
CORROSIVE
ZONE
ADD pH DECREASER
TO LOWER pH
IDEAL
ADD pH INCREASER
TO RAISE pH
8.4
8.2
7. 8
7. 6
7. 4
7. 2
7. 0
6.8
ALKALINITY
pH LEVEL
DO NOT USE SPA UNTIL TEST KIT
READING IS BELOW 5.0 ppm
RECOMMENDED LEVEL
SAFE
DO NOT USE SPA
ADD SANITIZER TO REACH
RECOMMENDED LEVEL
ppm
5.0-
4.0-
3.0-
2.0-
1.0-
0-
SANITIZER LEVEL
VERY LOW 0 ADD SODIUM
BICARBONATE
TO INCREASE
80
ACCEPTABLE
ZONE IDEAL
120
HIGH 180 ADD SODIUM
BISULFATE TO
VERY HIGH 240 DECREASE