Use and Care Manual

1. 5 x 5 x 30” Post Extensions (4)
2. #8 x 1 1/2“ Stainless Steel Screws (32)
3. Vinyl Weld (1)
Tools You Will Need
• Cordless Drill
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Please read through before starting assembly.
Chec
k Box for These Conten ts
In the event of missing or defective parts please call our customer service
dept. at 1 800 282 9346 (Mon. to F ri. 8:00 AM to 5:00 PM EST) .
ASSEMB LY INST RUCTIONS
1
1
2
The 5x5 Professional Post Extension Kit
(Designed to be used with any Vita Arbor with 5x5 Posts)
Not to Scale
30
5
4
8
2.5
3
VinylWeld
Glue all four sides of the joiner
STEP ONE STEP T WO
Slide the joiner of the 5x5 extension
into the arbor posts.
Toll Free Phone: [phone] Toll Free Fax: [phone]
www.wearevita.com
VinylWeld
STEP THREE
Screw all four sides of the arbor posts
with 2 screws per side (repeat for all posts).
* Once arbor installation is complete, the extension
joint should be buried 1" to 3" (depending on the
arbor it is being used with), below earth grade.
*