Installation & Assembly

11
8 x 8 Corner Pergola
1
Beams Assembly
Insert an inner beam followed by a joiner and an outer beam
as shown.
Note the mitered end.
Insert a 2x6x8’ board into the beam. The joiner may need to be
detached from the two beam sections to guide the board through.
Board should be inserted up to the mitered end
Fastened the joiner through the beam pieces and wood insert
using a total of 4 1 1/2” screws as shown.
Repeat for second beam.
1
2
STEP FOUR
2
Mitered End
Wood End
(Make sure the wood doesn’t
protrude past the mitered end)
3
3
4