Installation & Assembly

1
2
3
12
8 x 8 Corner Pergola
With a helper, Insert the non-mitered end into the routed holes at
one of the end posts as shown. Overshoot the post by a few inches
to allow the mitered end to be inserted in the next step.
Slide the beam over and into the routed hole in the corner post
as shown until it bottoms out inside the post.
Repeat for second post.
Fasten the beams to the posts using a total of sixteen 3” screws as
shown.
STEP FIVE
4
Beams Installation
1
2
4