Installation & Assembly

50 in
3 in
3 in
6 in
6 in
16
8 x 8 Corner Pergola
Rafter #4 Assembly
Take the 2x6x5’ section from the previous step and notch out the ends
as shown.
Insert the board through a joiner followed by the #4 Left and #4
Right Rafters as shown. Note: the stickers indicating the rafters
should meet inside the joiner.
Center the wood insert about the rafter and fasten the joiner with
four 1 1/2” screws as shown.
1
2
STEP NINE
3
1
2
3
Stickers