Installation & Assembly

Pergola Additional Materials List
Hardware (in plastic bag)
NOTE: WE HAVE INCLUDED 10% EXTRA SCREWS BEYOND WHAT IS IDENTIFIED
BELOW.
All Screws Included with this Kit are Self-Auguring.
A. Vinyl Weld Glue (2) - 20000
B.
1 1/2” Self-Auguring Stainless Steel Screws (14) - 20005
(to lock vinyl post and wood post together
)
C.
1 1/2” Self-Auguring Stainless Steel Screws (24) - 20005
(to lock Rafter and Beam Joiner
)
D.
1 1/2” Self-Auguring Stainless Steel Screws (26) - 20005
(to lock shade slats onto rafters
)
E.
4” Self-Auguring Stainless Steel Screws (8) - 20006
(to lock rafters onto beams)
F.
3” Self-Auguring Stainless Steel Screws (16) - 20007
(to lock vinyl post and wood post together)
If Mounting Pergola on Concrete (not intended to be installed on concrete pavers,
patio stones, or interlocking bricks) or Wood Deck
G.
4x4x8’ Pressure-Treated Wood Posts (3)
(purchase at local building center)
H
. 4x4 Steel Post Base Kit (3)
(purchase from local building center)
Consult the Post Base Kit instructions for hardware requirements, as they pertain to your application.
Be sure to purchase a flush-mount style Post Base Kit as the wooden posts will need to be installed up
against the inside of the vinyl posts.
If Mounting Pergola in Ground
I.
4x4x12’ Pressure-Treated Wood Posts (3)
(purchase at local building center) - Cut down to 10‘-6”
J.
Concrete Ready Mix (3) (purchase at local building center)
Rafter/ Beam Support (Required)
K.
2x6x
8 Pressure-Treated Boards (2)
(purchase at local building center)
L.
2x6x10’ Pressure-Treated Board (1)
(purchase at local building center)
M.
2x6x12’ Pressure-Treated Boards (2)
(purchase at local building
center)
Tools You Will Need
Level
Hammer
Tape Measure
String Line
Wood Stakes (4)
(temporary support for string line)
Step Ladders (2)
Cordless Drill
Tools You May Need
Circular Saw with Fine Tooth Blade
Framing Level
Framing Square
6
8 x 8 Corner Pergola
A
Purchase Separately
J
CONCRETE - Ready Mix
Purchase Separately
Purchase Separately
H
C DB E
IG K ML
F