Installation Instructions

Operation
1. Remove the isolator tab from the battery compartment.
2. For best accuracy, place the scale on a hard and flat floor. Carpeted or uneven floors can negatively effect the accuracy .
3. The scale operates with step-on technology but needs to be calibrated automatically under following occasions.
A. when first time use, moving the scale or battery exchange, the scale will display scale itself weight, and appear ”CAL” after around
1second, and then display “0.0” or “0.00” after around 2seconds , now it’s ready to step on to weigh normally.
B. If step on the scale before calibration, the scale will display an wrong weight and appear ”CAL” after around 1second, and then
display “0.0” or “0.00” after around 2seconds.
After calibration, please step again on to weigh and get correct weight.
4. Under other occasions, please step on to weigh directly.
5. When weighing, please remain standing evenly on the scale without shifting feet or body to get stable and right weight.
6. Step off the scale, the weight readings remain for several seconds. Then the scale will turn off automatically.
7. When Weighing without App, switch the unit by press the unit button on the backside of scale.
Weighing without Vitafit App