User Guide

5
vitagoods.com
Preparing Your Body Analyzer
1. Open the battery compartment on the scale’s underside.
2. Insert batteries (4x AAA) observing the polarity signs (+ and -)
inside the battery compartment.
3. Close the battery compartment.
4. Select kg, st, or lb weight mode by pressing the tab on the
back of the scale.
5. Position scale on a hard, flat surface.
Initializing Your Scale
The first time you use your scale and anytime you move your
scale it will need to be initialized so that it weighs you properly.
Follow these quick steps to initialize your scale (after removing
the insulating strip).
1. Place your scale on a hard, flat surface—not carpet.
2. Press down on the center of the platform with your foot, then
lift your foot off.
3. “0.0” will display on the screen.
4. Once the scale shuts down, it is ready to use; simply step on
the scale to take your measurements.
GETTING STARTED