Use and Care Manual

ManualsBrandsVital Coat ManualsConcrete SealersV-100 Premium 46 lb. Water Base Acrylic Epoxy Natural Clear Concrete Masonry and Stone Sealer

Table Of Contents

Odor

V-100 Premium Sealer is a recommended for Interior or Exterior applications. It will provide a protective coating to new or aged

Concrete, Masonry, or Stone substrates. V-100 Premium Sealer works well on smooth surfaces will not change the natural color of

your substrate. It will dry clear and provide an aesthetically pleasing finish and slight light reflection to the surface.

Features/Benefits

Technical Information

Note*Higher temperatures will speed up activation time and decrease the pot life of our component products. For every additional 10 degrees in temperature, your coating's pot life will generally decrease by half. The ideal temperature for use is 80

°F.

*Excellent Adhesion

*Keeps Concrete and Masonry Looking Fresh and Clean

Result

Property

Solids

20.00%

Application Temperature

Pot Life after Mixing Part A with Part B

VOC Content

Re-Coat Time

Clear to translucent solution

Dry to Touch

Mild

50°F - 85°F

72 hours

<25g/L

2 hours

The coverage rate will vary depending upon surface porosity and application method use. The typical range is approximately 250 to

300 sq. ft. per gallon per application. Two applications are recommended with approximately 300 to 350 sq. ft. per gallon coverage .

Avoid excessive build up.

Coverage

Packaging

This product is available in 1, and 5 gallon containers. Other quantities available upon request.

1 to 2 hours

Description

Primary Applications

V-100 Premium Sealer is a two-part Acrylic-Epoxy system that utilizes Vital Coat’s unique acrylic resin. When mixed with Vital Coat

Activator, this formulation will yield a water resistance shell within two hours of application which is a great advantage in case of

inclement weather or other exposure to moisture. It takes V-100 Premium

up to 72 hours to reach a full cure at ambient temperatures.

Even quicker with elevated temperatures. The ambient dried coating will have excellent resistance to solvents such as Methyl Ethyl

Ketone (MEK), Acetone and Isopropyl Alcohol. Detergents and cleaners will not remove this coating. It also resists staining.

Appearance

Vital Coat

V-100 Premium Sealer

Technical Data Sheet (TDS)

*Resists Hot Tire Pick-up

*Water Resistant Finish

*Repels Oil Based Stains

*Mold and Mildew Resistant

*Corrosion Inhibitor

*Non Yellowing

Summary of content (5 pages)

PAGE 1
Vital Coat V-100 Premium Sealer Technical Data Sheet (TDS) Description V-100 Premium Sealer is a two-part Acrylic-Epoxy system that utilizes Vital Coat’s unique acrylic resin. When mixed with Vital Coat Activator, this formulation will yield a water resistance shell within two hours of application which is a great advantage in case of inclement weather or other exposure to moisture. It takes V-100 Premium up to 72 hours to reach a full cure at ambient temperatures. Even quicker with elevated temperatures.
PAGE 2
Shelf Life This product has a shelf life of up to one year in its original, sealed, unopened container prior to any activator or catalyst being added. If product appears to be hardened or separated contact Vital Coat before use. Directions for Use Surface Preparation: Concrete surfaces must be dry, structurally sound, free of loose or deteriorated concrete and free of dust, dirt, paint, efflorescence, oil and all other contaminants. Do not apply if rain is in the forecast within 24 hours.
PAGE 3
SAFETY DATA SHEET Vital Coat - V-100 Premium - Concrete Sealer 1. PRODUCT AND COMPANY IDENTIFICATION Trade Name: V-100 Premium Concrete Sealer Manufacturer: Vital Coat 2172 Arendell Way. Tallahassee, Florida. 32308 Telephone: Toll Free 844-284-2858 Chemical Name: Water Based Acrylic CoPolymer Product Use: Concrete, Brick, Block, and Masonry Sealer For emergency: Contact 911 For Non Emergency Health and safety Information contact: Toll Free 844-284-2858 2.
PAGE 4
SAFETY DATA SHEET 6. ACCIDENTAL RELEASE MEASURES Notify the appropriate authorities immediately. Contain spill if possible. Avoid breathing vapor. Use selfcontained breathing apparatus or supplied air for large spills or in a confined area. Wipe up or use suitable absorbent material and shovel into appropriate DOT approved container for disposal in accordance with local state and federal rules and regulations. Prevent entry into sewers or waterways. Avoid contact with skin, eyes or clothing.
PAGE 5
SAFETY DATA SHEET 14. TRANSPORTATION INFORMATION D.O.T.: Not a regulated hazardous material for transportation. Hazard Class: N/A. UN/NA ID Number: N/A. Proper Shipping Name: Not regulated. 15. REGULATORY INFORMATION R.C.R.A.: This product does not meet the definitions or contain any substance appearing in the listings contained in 40CFR261. This product does not contain or was manufactured with any EPA Class 1 or Class II ozone depleting substances. 16.