SDS

Vital Coat Silane Siloxane Penetrating Sealer
Revision Date 7/8/2020
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 9
pads of cotton) by forming dikes. Dikes should be placed to contain spill in a manner that
will
prevent material from entering sewers and waterways. Large spills, once contained,
may be picked up using explosion
proof, non-
sparking vacuum pumps, shovels, or buckets,
and disposed of in suitable containers. If a large spill occurs
notify the appropriate
authorities. In case of road spill or accident contact INFOTRAC (1-800-535-5053).
CAUTION: If spilled material is cleaned up using a regulated solvent, the resulting waste mixture will
also be regulated. Do not empty into drains. All disposal must comply with federal, state, and local
regulations. The
material, if spilled or discarded, may be a regulated waste. Refer to state and local
regulations. Department of Transportation (DOT) regulations may apply for transporting this material
when spilled. See Section 14.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Open containers carefully and in a well-ventilated area, and use appropriate respiratory
protection. Wash hands thoroughly after handling. Keep containers closed when not in use.
Do not transfer to unmarked containers. Empty containers contain product residue which
may exhibit hazardous properties therefo
re, do not pressurize, cut, glaze, weld or use for
any other purpose. Return drums to reclamation center for proper cleaning and reuse.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Store in a cool, dry, well ventilated area. Keep containers tightly closed and store away
from heat, sparks, open flame or oxidizing materials. Extended storage at excessive
temperatures may produce odorous and toxic fumes from product decomposition..
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region-specific regulatory bodies.
Appropriate engineering controls
Engineering controls
Avoid creating dust or mist. Local exhaust ventilation, process enclosures, or other
engineering controls are required when handling or using this product to avoid over
exposure. Use explosion
-proof ventilation equipment. Do not use in closed or confined
s
paces. Keep all levels below exposure limits. Perform regular monitoring to ensure
exposure limits are not exceeded.
Individual protection measures, such as personal protective equipment
Eye/face protection
Use safety eyewear with splash guards or side shields. Use additional eye protection such
as chemical safety goggles when the possibility for eye contact from splashing, spraying
liquid, or airborne material exists.
Skin and body protection
Avoid Contact with product. Wear appropriate protective gloves and clothing to prevent skin
exposure. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching gloves outer surface) to avoid skin contact with this product.