User and Care Instructions

ManualsBrandsVitamix ManualsBlenders62850

Ascent And Venturist series cups, Lids, BLAde BAse And seAL

Use and Care Instructions

1. L

oad your container according to your recipe or the load order in the illustration here. DO NOT blend hot liquids in the

20 oz. (0.6 L) cup or 8 oz. (240 ml) bowl.

2. Locate the arrows on the blade base and cup or bowl. The arrows are important alignment features to ensure safe use of

the product.

Liquids

DO NOT blend hot liquids!

Dry Goods

Leafy Greens

Fruits & Veggies

Ice & Frozen

Ingredients

IMPORTANT! Tighten the blade base onto the bowl

or cup until the arrows line up with the arrow on the

bowl or cup.

3. Put a seal on the bottom thread of the blade base. The seal should ﬁt

snugly and evenly around the thread.

4. Thread the blade base onto the cup or bowl in a clockwise direction.

Tighten the blade base onto the bowl or cup until the arrows line up. DO

NOT overtighten or leaking can occur.

5. Put the cup or bowl and blade base onto the blender base.

6. Blend the recipe according to the instructions in the recipe.

7. If the mixture stops circulating, press the On/O switch to stop the

motor. Wait until the blades stop rotating. Remove the cup and blade

base from the blender base. Turn the cup over. Unthread the blade base

from the cup. Stir the ingredients. Add liquid if necessary. Reattach the

blade base, place on blender base and continue blending.

8. After blending, wait until the blades completely stop before removing

the lid or container/cup from the blender base.

9. If necessary, use a Vitamix Blade Scraper or spatula to remove salsa, jelly,

jam, peanut butter, and other thick ingredients from under the blades

only after the blender has been turned o and the container has been

removed from the motor base.

WARNING

To Avoid Injury. NEVER TOUCH MOVING PARTS.

Keep hands and utensils out of containers and cups during blender operation.

DO NOT insert ﬁngers or utensils around the blades while the blades are spinning.

The blades will continue to spin until they come to a complete stop at the end of the blend

cycle. Allow the blades to come to a complete stop before handling the blade base and cups.

Properly align the arrows on the blade base and the cup or bowl BEFORE blending.

If the cup becomes un-threaded from the blade base during operation, turn the machine OFF

and wait until the motor and blades come to a complete stop before attempting to remove

the cup and blade base from the motor base.

Blade Base

Bowl or Cup

WARNING

DO NOT use your 20 oz. (0.6 L) cup or 8 oz. (240 ml) bowl to heat ingredients or to blend hot liquids.

Heated ingredients and liquids may create internal pressure which could cause the cup to burst and cause injury.

DO NOT continuously use your machine for more than 75 seconds for the 20 oz. (0.6 L) cup or 8 oz. (240 ml)

bowl.

If a cup becomes warm to the touch or steams or vents, immediately stop blending ingredients and turn o or

unplug blender. Allow the cup and ingredients to cool to room temperature before removing the blade base.

Parts will become hot with extended use.

DO NOT touch the drive socket in the blender base or the drive spline in the blade base.

To avoid damage or personal injury, DO NOT use the cups (including the blade base or lids) in the microwave.

Summary of content (6 pages)

PAGE 1
Use and Care Instructions A scent and V enturist S eries C ups , L ids , B lade B ase and S eal WARNING To Avoid Injury. NEVER TOUCH MOVING PARTS. Keep hands and utensils out of containers and cups during blender operation. DO NOT insert fingers or utensils around the blades while the blades are spinning. The blades will continue to spin until they come to a complete stop at the end of the blend cycle. Allow the blades to come to a complete stop before handling the blade base and cups.
PAGE 2
C are Dishwasher: The cups, lids, blending adapter and seals are dishwasher safe or can be washed and sanitized with the procedures below. In-Place Cleaning: 1. Fill the container half full with water and add a couple of drops of dishwashing liquid. DO NOT BLEND HOT WATER. 2. Put a seal on the bottom thread of the adapter. The seal should fit snugly and evenly around the thread. Thread the adapter onto the cup in a clockwise direction just until tight. 3. Put the cup and adapter onto the base. 4.
PAGE 3
Instructions d’utilisation et d’entretien Tasses, couvercles, bloc de coupe, et joints d’étanchéité séries Ascent et Venturist ATTENTION Afin d’éviter toute blessure, Ne JAMAIS toucher les pièces mobiles. Tenir les mains et les ustensiles éloignés des récipients et des tasses lorsque le mélangeur fonctionne. NE PAS insérer de doigts ou d’ustensiles près des lames pendant que celles-ci tournent. Les lames continueront à tourner jusqu’à ce qu’elles s’arrêtent complètement à la fin du cycle de mélange.
PAGE 4
E ntretien Lave-vaisselle : Les tasses, couvercles, adaptateurs de mélange et joints d’étanchéité vont au lave-vaisselle ou peuvent être lavés et désinfectés en suivant les procédures ci-dessous. Auto-nettoyage : 1. Versez de l’eau jusqu’à la moitié du récipient et ajoutez quelques gouttes de détergent à vaisselle. NE PAS MÉLANGER DE L’EAU CHAUDE. 2. Enfilez un joint d’étanchéité sur la vis inférieure de l’adaptateur. Le joint d’étanchéité doit être bien ajusté et entourer uniformément le filetage.
PAGE 5
Instrucciones de uso y cuidado V asos , tapas , conjunto de cuchillas y sello de la serie A scent y V enturist ADVERTENCIA Para evitar lesiones. NUNCA toque las piezas móviles. Mantenga las manos y los utensilios fuera de los vasos y tazones durante la operación de licuado. NO inserte los dedos ni utensilios alrededor de las cuchillas mientras éstas estén girando. Las cuchillas continuarán girando hasta el final del ciclo de licuado que es cuando se detienen por completo.
PAGE 6
C uidado Lavavajillas: Los vasos, las tapas, el adaptador de licuado y los sellos pueden introducirse en lavavajillas o pueden lavarse y desinfectarse con los siguientes procedimientos. Limpieza en el lugar: 1. Llene el recipiente por la mitad con agua y agregue un par de gotas de detergente para lavavajillas. NO LICUE AGUA CALIENTE. 2. Coloque un sello en la rosca inferior del adaptador. El sello debe encajar cómoda y parejamente alrededor de la rosca.