Installation Guide

Flow Rate = 1 gpm (3.78L) Capacity = 3,000 gallons (11,350L) or 6 months

Manufactured and warranted by:

GHP Group Inc.

USA: 6440 W. Howard Street, Niles, Illinois 60714

Canada: 271 Massey Road, Guelph, Ontario, N1K 1B2

Note: Read this performance data and compare the capability of this system with your actual

water treatment needs. It’s recommended that, before installing the system, you have your

water supply tested to determine your actual water treatment needs.

The system conforms to NSF/ANSI Standard 42 for the specific performance claims as verified

and substantiated by test data. While testing was performed under standard laboratory

conditions, actual performance may vary.

This system has been certified by NSF International according to NSF/ANSI 42 and CSA B483.1

for the reduction of substances listed below. The concentration of the indicated substances in

water entering the system was reduced to a concentration less than or equal to the permissible

limit for water leaving the system as specified in NSF/ANSI 42/53.

Performance Data:

VFK-1U with VRFU-CTO Carbon Block Filter

Substance

Influent Challenge

Concentration

Reduction

Requirements

Average

Concentration

Chlorine 2.0mg/L ± 10% ≥ 50% 91.8%

Particulates (≥5 <15µm)

Class III

10,000 /mL ≥ 85% 99.9%

Replacement Parts List:

Part Description Part #

1 Bracket YY.VFK1U-1

2 Filter Head YY.VFK1U-2

3 Filter Cartridge VRFU-CTO

4 3/8” White Tubing, 6’ long YY.VFK1U-4

5 3/8” Push-in elbow YY.VFK1U-5

6 3/8” Compression Connect Set YY.VFK1U-6

7 O-ring Small, Filter Sump YY.VFK1U-7

8 O-ring Big, Filter Sump YY.VFK1U-8

9 Faucet Adaptor YY.VFK1U-9

10 Flow Restrictor, Ø1.3mm YY.VFK1U-10

11 Mounting Screw YY.VFK1U-11

12 Filter Sump YY.VFK1U-12

13 Sump Wrench YY.VFK1U-13