System information

26!
SYSTEM : SYSTEM MANAGEMENT!
Click the SYSTEM MANAGEMENT men
u.!
SYSTEM INFORMATION: User can see the system information as below.!
F/W version : Shows the firmware version of the DVR.!
H/W version : Shows the hardware version of the DVR.!
VIDEO SIGNAL TYPE : The DVR automatically switches between PAL and NTSC depending on the"
channel 1 input signal at power on.!
DISK CAPACITY : The first value shows the amount of hard drive capacity used by recorded footage, t
he"
second value shows the total hard drive capacity installed.!
IP ADDRESS : Shows either the manual IP address entered in NETWORK setup or the IP address"
assigned by a DHCP server if enabled.!
MAC ADDRESS : Shows the MAC (Media Access Control) address of the DVR. It is unique – no other"
network device has this MAC address.!
DDNS DOMAIN NAME: If DDNS is enabled, the host DDNS server is specified here.!
NET CLIENT PORT : The port number that the DVR uses to support remote connection from the client"
software.!
WEB SERVER PORT : The port number that the DVR uses to support remote connection from Internet"
Explorer or other web browsers.!