System information

NETWORK!
Click the NETWORK menu and determines each value. !
NETWORK: IP SETUP!
DHCP : When enabled, the DVR will obtain an IP address automatically if it is connected to a DHCP server"
or router.!
WEB SERVICE : When enabled, it allows remote connections using Internet Explorer or other web browsers.!
IP ADDRESS : If DHCP is not being used, the IP address can be manually set.!
GATEWAY : If DHCP is not being used, the gateway IP address can be manually set.!
SUBNET MASK: If DHCP is not being used, the subnet mask can be manually set.!
1ST DNS SERVER : If DHCP is not being used, the first DNS server can be manually set.!
2ND DNS SERVER : If DHCP is not being used, the second DNS server can be manually set.!
RTSP SERVICE PORT : If connected Router support UP&P (Universal plug and play) function, "
when you click the AUTO PORT, the port forwarding is automatically setup."
And also can delete the port & test the port whether working or not.!
WEB SERVER PORT : : If connected Router support UPNP (Universal plug and play) function, "
when you click the AUTO PORT, the port forwarding is automatically setup."
And also can delete the port."
The port number that the DVR uses to support remote connection from Internet"
Explorer or other web browsers.!
ALIAS : When you enter the DDNS HOST NAME in DDNS setup (Next page), you can see the information like
below. example: 1234.dvrlink.net:8080"
MAX TX SPEED : Specifies the maximum bandwidth that the DVR can use during a remote connection.!
Click the IP SETUP menu.!
30!