System information

32!
EVENT / SENSOR!
Click the EVENT / SENSOR menu.!
To setup the various event handling options, highlight EVENT/SENSOR and press ENTER.!
EVENT / SENSOR: HDD EVENT!
Click the HDD EVENT menu.!
The DVR can monitor the hard drives and detect problems that may be developing.!
SMART ALARM : Enables SMART disk monitoring.!
CHECK INTERVAL : Can be adjusted as desired.!
DISK FULL EVENT: Determines ON/OFF.!
EVENT / SENSOR : ALARM INPUT!
Click the ALARM INPUT menu an
d click the OPERATION and TYPE
value.!
Determines the behavior of each of the 8/16 alarm inputs.!
OPERATION : Alarm inputs can be enabled or disabled.!
TYPE : Alarm inputs can be set as normally open or normally closed.!