System information

37!
RECORD MENU!
To setup the recording behavior of the DVR, highlight RECORD MENU and press
ENTER.!
RECORD : RECORDING OPERATIONS!
SCHEDULE MODE : Either DAILY (one schedule will apply to every day of the week)
or WEEKLY (each day of the week has its own schedule).!
PRE EVENT RECORDING TIME : When the DVR is not in continuous recording
mode, this setting determines the amount of footage that is always recorded
before an event occurs. (motion detection, alarm input etc.)!
POST EVENT RECORDING TIME : When the DVR is not in continuous recording
mode, this setting determines the amount of footage that is always recorded after
an event occurs. (motion detection, alarm input etc.)!
Click the RECORD menu. !
Click the RECORDING OPERATION
menu and click each value. !
Then, click the value by button
to change.!
Click the “MENU”. !
Input the password . Then main menu will
appear.!