VT-PTZ220N ENVI Series 2.0 MegaPixel 20x Network PTZ Camera with PoE VITEK • 1/2.8” 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor • Up to 30fps live view @ 1920 x 1080p • High speed PTZ operation from 0.1°/sec to 420°/sec. • XDNR Noise Reduction (Utilizes both 2DNR & 3DNR) • 16:9 Video format • True Day/Night with ICR & DSS • H.
ENVI Series: VT-PTZ220N Table of Contents 1. Box Contents............................................................................................................................ 6 2. Included Accessories ................................................................................................................ 6 3. Available Accessories ................................................................................................................ 6 3.1. Optional Mounts & Housings ...............
ENVI Series: VT-PTZ220N 12.2. Date & Time............................................................................................................... 38 12.3. Admin Password ......................................................................................................... 39 12.4. Access Control ............................................................................................................ 39 12.5. User Registration ....................................................................
ENVI Series: VT-PTZ220N 17.3. Reboot....................................................................................................................... 79 17.4. Factory Default........................................................................................................... 79 17.5. System Update ........................................................................................................... 80 18. ENVI Series Viewer...................................................................
ENVI Series: VT-PTZ220N 27. Quick Start Guide ............................................................................................................... 105 27.1. EN-V-R Configurator User Interface ........................................................................... 105 27.2. Searching for IP Devices ........................................................................................... 106 27.3. Registering IP Devices ........................................................................
ENVI Series: VT-PTZ220N 34.1.5. System, Network Configuration–IP CCTV-DNS ................................................. 144 35. IP-CCTV DNS Registration .................................................................................................. 145 36. IP-Device Registration ........................................................................................................ 151 36.1. IP-Device Registration (Manual) .............................................................................
ENVI Series: VT-PTZ220N 1. Box Contents 1) VT-PTZ220N 20x IP PTZ Camera 2) Mounting Hardware &Accessories 4) ENVI Series CD 2. Included Accessories Surface Mount Housing Qty: 1 Mounting screws Qty: 3 Alarm/Multi Cable Qty: 1 ENVI Series CD Qty: 1 3. Available Accessories 3.1.
ENVI Series: VT-PTZ220N 4. VT-PTZ220NInstallation • Remove by unscrewing the surface mount housing (See Fig. A). Simultaneously push the right and left hooks from the camera, this will free the camera from the base. (See Fig. B) 4.1. Surface mount Installation • Attach the PTZ Dome camera base to a sturdy surface with two of the included St4x30 screws.
ENVI Series: VT-PTZ220N 4.2. Connections 1. Power Depending on the type of installations, apply power to the camera by one of the two options below. a) Via Ethernet – Use only with POE + switch (100 Meters max distance) b) 12VDC - Use with 12VDC 2A ** SEE IMPORTANT NOTES BELOW ** Primary and secondary grounds are completely isolated to avoid possible ground-loop problems. 2.
ENVI Series: VT-PTZ220N 3. Alarm Connections This camera supports Alarm IN/OUT (x2), Green = alarm IN, Blue = alarm OUT. (For more information, refer to Section 14.4DI (Sensor Input) / DO (Alarm Output) on page 62) 4. Audio In/Out This camera supports Audio IN/OUT for more information (Enable Audio under Web-Admin >Device control >camera and motion configuration. For control and adjust Audio (Viewer Manual>Audio Control Bar) NOTE: For more information, refer to Section10. ENVI Admin Menu on page 35. 4.3.
ENVI Series: VT-PTZ220N 4.4. Attaching PTZ Camera to Base a) Place the camera on to the Guide and push upwards, you will hear a click from the camera snapping in to the base. b) Screw back the Surface Mount Housing in to Place.
ENVI Series: VT-PTZ220N 5. Camera Software Installation 1. Run IP Installer Software from the CD program on a computer that is on the same network as the IP camera. 2. StartIP Installer, by double clicking the icon “IP Installer” 3. After the program has started, the main window of IP Installer program will appear on the screen as shown below. 4. Search for the installed camera on the network by clicking the search product icon, the camera should appear as the image below. The default IP address is 10.
ENVI Series: VT-PTZ220N 7. After the camera was configured by the program automatically, you will be able to get access by a) Right click over the camera information, “Go Product Homepage” b) Click over the icon “Connect Product Homepage” 8. From the Home Page, you can “Live View”or administrate “Admin” the camera.
ENVI Series: VT-PTZ220N On Live View you will be able to see live video from your camera. NOTE: For more information, refer to Section 10. ENVI Admin Menu on page 35.
ENVI Series: VT-PTZ220N 6. VT-PTZ220N Features 2.0 MegaPixel 20x Network PTZ Camera with PoE+1/2.8” 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor • • • • • • • • • • • • • Up to 30fps live view @ 1920 x 1080p High speed PTZ operation from 0.1°/sec to 420°/sec. XDNR Noise Reduction (Utilizes both 2DNR & 3DNR) 16:9 Video format Auto TDN without focus shift by dual filter switcher True Day/Night with ICR & DSS H.
ENVI Series: VT-PTZ220N 7. IP Installer: Introduction IP Installer is a proprietary utility program for VitekIP products. It enables users of Vitek products to search their network for any Vitek network camera, video server, or network video recorder no matter what IP address it has. By using IP Installer, users will be able to facilitate network setup process for Vitek products deployment.
ENVI Series: VT-PTZ220N You may be prompted to continue running the installation program. Click Yes button, then the following window will be shown on the screen. To continue the installation, click Next. The following window will be displayed for location to install.
ENVI Series: VT-PTZ220N The default location for installation is C:\Program Files\IP Installer. It is recommended to install in this folder, if you want to change it to a different location, click the Browse button to choose location. Now click the Install button. You will see the progress of theinstall as shown below.
ENVI Series: VT-PTZ220N When the files are done copying, the following window will be shown. Click the Finish button to complete the installation. 8.2. Uninstalling IP Installer If you want to remove the IP Installer program from your PC, click Start > All Programs > IP Installer > Uninstall. You may be prompt to continue running theuninstall program.
ENVI Series: VT-PTZ220N Click onthe Yes button, then the following window will be shown on the screen. Click on the Next button and you will see the following window. Click on the Uninstall button to start removing the IP Installer program from your computer. The following window will be displayed.
ENVI Series: VT-PTZ220N Click on the Finish button to close the window 20
ENVI Series: VT-PTZ220N 9. Using IP Installer 9.1. Starting the Program Once IP Installer program has been installed on your computer, a shortcut icon should be created on the desktop of your computer.You can start IP Installerby double clicking the icon. Or you can also start the program by clicking Start > All Programs > IP Installer > IP Installeras shown below. After the program has started, the main window of IP Installer program will appear on the screen as shown below.
ENVI Series: VT-PTZ220N 9.2. Search Product Make sure that your Vitek products are powered and connected to the network, and then click the Search Product button. A status window will pop up to show the progress of the search. Wait until it reaches 100%, or you may press the Cancel button to stop the search at any given timeand proceed with the results made until that moment. After searching is completed 100%, the IP Installer program will display the IP devices found.
ENVI Series: VT-PTZ220N 9.3. Manual Network Setup Configuring the network parameters of the devices in the list can be started either by highlighting and right clickingmouse button or by clicking Manual IP Setupbutton on the main Toolbar. When one IP device is selected, the following screen will appear MAC Address MAC address of the selected device is shown. Server Name Input desired name of camera i.e. Lunch Room HTTP Port Input port number to access IP devices homepage via web.
ENVI Series: VT-PTZ220N Network Authentication (Admin Password) Save Configuration Option General network parameters are required in this part. Please contact your network administrator for detail.(IP Address, Netmask, Default Gateway, DNS1, DNS2) Password for the IP device. (Default password for Vitek products is “root” unless already changed) Select whether the configured contents is to be saved in the Camera memory or not.
ENVI Series: VT-PTZ220N Model Model Numbers of the IP devices that you selected. MAC Address MAC address of the selected device is shown. Server Name Name of the selected IP device. IP Type How to assign IP address to the device (Select Static here for Manual IP Setup) IP address, Netmask, Gateway, DNS1, DNS2 General network parameters are required in this part. Please contact your network administrator for detail. HTTP Port HTTP port number of the IP device for web access to homepage.
ENVI Series: VT-PTZ220N Server Name Name of the selected IP device. HTTP Port HTTP port number of the IP device for web access to homepage. IP Type How to assign IP address to the device (Select Static here for Manual IP Setup) Network General network parameters are required in this part. Please contact your network administrator for detail. (IP Address, Netmask, Default Gateway, DNS1, DNS2) Authentication (Admin Password) Password for the IP device.
ENVI Series: VT-PTZ220N Note: If your network has more than one IP address Zone at the same time, the confirmation window will be displayed as below. You need to choose the one you are going to use for your IP devices.
ENVI Series: VT-PTZ220N 9.5. Using DHCP Server If your network has a DHCP server running for assigning IP addresses, you may choose to let it assign IP addresses to the IP devices on the list. To do that, first open the Network Setup window either by Manual IP Setup or Automatic IP Setup procedure. Choose DHCP in “IP Type” selection, then IP Address, Netmask, Default Gateway field in Network setup area on the window will be disabled to input as shown below.
ENVI Series: VT-PTZ220N MAC Address MAC address of the selected device is shown. Server Name Name of the selected IP device. HTTP Port HTTP port number of the IP device for web access to homepage. IP Type How to assign IP address to the device (Select PPPoE in this mode) PPPoE Authentication (Admin Password) Save Configuration Option User Authentication for PPPoE Connection. • PPPoE User: Enter User ID. • PPPoE Password: Enter Password for the User ID.
ENVI Series: VT-PTZ220N 9.7. Updating Firmware Once IP devices are searched and shown on the screen as functioning successfully, you can update the firmware of them in IP Installer program. To do that, first check the firmware version of the device, which you can find on the IP Installer window. In the above picture, the firmware version of this product is 4.14-01-ds while the latest firmware version available is 4.16-B0-ds-VI as you could see at Vitek’s homepage (http://www.vitekcctv.com/Downloads.
ENVI Series: VT-PTZ220N After clicking OK the following window will be displayed. Note: Do not CLOSE window until completed, to avoid permanent damage to the camera. You can also select multiple IP devices at the same time, and have them start firmware updating in a single step. Select the files to update by holding CTRL key and selecting which IP devices to update Click Start Update button. You will see the update window brought up with multiple IP devices listed.
ENVI Series: VT-PTZ220N 9.8. Filter Configuration When you need to search only for the IP device having a specific range of MAC or IP addresses, you can do it by using this feature. To set the search condition, click Filter Configuration button on the Toolbar, then the following window will show up on the screen. The first six HEX characters are already filled in with 1C:7C:45, which is the MAC prefix for Vitekproducts. Put a checkmark inMAC Address or IP Range to set the range for searching.
ENVI Series: VT-PTZ220N To start searching with this condition now, click Search Product button on the toolbar. The program will start searching and show the result after a moment. 9.9. Live View Once searching and configuration on IP devices are done, you should make sure that the IP devices are accessible with the new settings. The best way to do it is by connecting to the homepage of each IP device’s built-in server, and starting Live View feature.
ENVI Series: VT-PTZ220N Click Live View on the top right of the window, then ENVI Series Viewer ActiveX program will be started. If you have not installed the ENVI Series Viewer program before, it will ask for a confirmation to install it. Allow it and you will be able to find out whether the configuration by IP Installer program is properly done. Note: Refer to Section 18ENVI Series Viewer on page83 for detailed information about the ENVI Series Viewer ActiveX program.
ENVI Series: VT-PTZ220N 10. ENVI Admin Menu After connecting to a VITEKENVI Series camera via web browser, you’ll find the web page as shown below. The upper rightmost item of the menu is Admin; this is where you can set up most of the features in the VITEK camera you’re connected to. 10.1. EnteringAdmin Menu Click Admin then you’ll see a login window.In the login window, enter root for both ID and password as they are the factory defaults. Press Enter key or click OK.
ENVI Series: VT-PTZ220N 10.2. Admin Menu Structure The following table shows the hierarchy of the Admin menu structure that we’re going to deal with in this manual. 11. QuickConfiguration In Quick Configuration, you will be able to set up many of the essential parts of the configuration in a simple manner without going into details. Selecting Quick Configuration gives you the menu as seen below. You can perform each setup by clicking the one you would like to configure. 11.1.
ENVI Series: VT-PTZ220N 11.4. Step 4: IPCCTVDNS.COM When VITEK Server is used in a Dynamic IP environment, it is required to utilize IPCCTVDNS feature. Refer to Section 35. IP-CCTVDNS Registration on page 145to see how to set up. 11.5. Step 5: Recording Configuration Vitek cameras with MicroSD card can be configured for recording options in this section.Refer to Section 16.1MicroSD Configuration on page 72to see how to set up. 11.6.
ENVI Series: VT-PTZ220N As an administrator, you can change the name of the camera/ server, but other values are not allowed to be changed. To change the camera/ servername, enter a new name in the Server Name field. You may use up to 21 alphanumeric or up to 10 Unicode characters. Tab or any other special characters are not allowed. Click Apply button to save the setting and it will take effect immediately. 12.2. Date & Time Click Step 2 on Quick Configuration.
ENVI Series: VT-PTZ220N 12.3. Admin Password To change the password for the administrator, click Admin Password in System Configuration menu. Default ID for admin account is fixed as “root” and is not allowed to change. In Old Password field, enter the current password. In both New Password and Confirm Password fields, enter the same new password. The password must be between 4 and 23 alphanumericcharacters.Click Apply button to put it into effect.
ENVI Series: VT-PTZ220N Enter aUser ID between 4 and 23 alphanumeric characters. In bothPassword and Confirm Password fields, enter the identical password respectively. The password must be between 4 and 23 alphanumeric characters. In Name filed, enter the user’s name up to 23 alphanumeric characters. Now select one of the four items from System Resource Access Permission, which defines the permission level for registered users to the VITEKcamera.
ENVI Series: VT-PTZ220N • VS Module ID: VS Module is a network device that has been registered in theVITEKcamera • Camera No.: Among the cameras of the VS Module select one to set up. (between all,1or2) • Alarm Control: Determine if Alarm control is to be allowed. • Audio Control: Determine if Audio Control is to be allowed. After finishing the registration process, click Applybutton to add the user. 12.5.2. Edit To edit a user account, select Edit.
ENVI Series: VT-PTZ220N 13.1. Static IP Configuration Select Network Configuration under Network configuration For static IP, select Static IP and input IP address, NetMask, Gateway, DNS1, DNS2 and click apply to save settings. After apply, program will ask to close web browser for updates, which will take 20~30 seconds. If Back button is clicked all values will be discarded. If Refresh button is clicked, the program will load previous values. 13.2.
ENVI Series: VT-PTZ220N 13.3. PPPoE Configuration PPPoE is used to connect VITEK products to a PPPoE modem provided by the ISP. Since PPPoE needs verification, ID and a password are necessary to access the network. Type in PPPoE user ID and password 13.4. Network Ports In this configuration, you set up the HTTP port for VITEKcameras to communicate with the Client PC. HTTP Port is the network port that is used when a Client PC connects to the VITEKcamera Web page.
ENVI Series: VT-PTZ220N 13.5. Bandwidth Control Configuration Bandwidth control is for limiting maximum network traffic. If it is enabled with Bandwidth limits, maximum data size transferred from VITEKcameras won’t exceed bandwidth limits set by users. If transferred data is exceeded, part of the data will be randomly lost. If multiple users try to access a VITEKcamera when bandwidth control is enabled, users connected to the VITEKcamera will share network bandwidth limit.
ENVI Series: VT-PTZ220N 13.6. View Network Status This menu shows network status of VITEKcameras. 13.7. Network Status Notify This feature helps to send updated network status information to registered email address if any changes happen. This function will work under DHCP or PPPoE.
ENVI Series: VT-PTZ220N First, select Enable to use the feature. Then enter the address of the SMTP server which is needed for email service. If your SMTP server requires a user ID and a password for authentication, you will have to Enable Authentication Loginand enter the user ID and Password. In Sender field, enter your email address or other meaningful words that will show the message was sent from the VITEKcamera as a notification.
ENVI Series: VT-PTZ220N . 13.9. Port Forwarding & UPnP UPnP(Universal Plug and Play)is a kind of network protocol to help users to find and configure network products in the same local network area. Port forwarding is to assign a certain network port to a network product so users can access it from outside of the Local Area Network. Generally, port forwarding can be configured from the network router.
ENVI Series: VT-PTZ220N 13.10. RTP/RTSP Setup Factory default is Enable to be used with other manufactures VMS software’s RTSP (Real-Time Streaming Protocol) is a protocol to transfer video and audio streams over the network. Any application supporting Standard RTSP can be used for VITEKcameras. Quick Time Player or VLC program can be used withthis; it may not be supported in the environment within a firewall.
ENVI Series: VT-PTZ220N Service RTSP Port Enable: Start RTSP service Disable: Stop RTSP service In normal case, use default port number 554 to connect to RTSP service. If not using port 554, enter the port number you want to use. e.g.) port number 445==>rtsp:// network video server ip address:445/cam0_0 RTP Start Port The starting number of the port for video transfer. Each time video transfer connection is made, the port number also increases. Multicast Address Address for multicast video transfer.
ENVI Series: VT-PTZ220N 14. Device Configuration 14.1. Privacy Zone Users can set a privacy zone if a certain part of the screen needs to be unmonitored. To set the region, click Privacy Zone from Device Configuration category. To Add a Privacy zone click Newbutton, aGreen-colored box will appear, click on the Green box and it will turn Red, at this point you can resize it by clicking and holding any corner and drag to desired size.
ENVI Series: VT-PTZ220N Users can add up to 8 Privacy Zones per screen by repeating above steps. If you add more than 8, an error message will display on the screen. To delete a privacy zone, click the zone and click Delete button followed by Apply button.
ENVI Series: VT-PTZ220N 14.2. PTZ This section will allow you to assign Presets, Scans, Patterns and Tours. 14.2.1. • • • • • • PTZ Preset Speed:Not used for Presets, fixed at 420° per sec. PTZ Move Mode: Not used for presets, fixed on Continuous Index: PTZ Preset Number. (1~32 preset) Mode: On: Preset available, Off: Preset unavailable Preset Name: PTZ Preset name; editing by user.(Up to 16 characters) Camera Settings: Camera settings for current Preset only Execution 1. Speed not used 2.
ENVI Series: VT-PTZ220N 7. Click the “Set” button to set camera function. 8. Click the “Apply” button to store preset. 14.2.2. PTZ Scan The function of Scan is to move the camera automatically between two defined points. • Speed: not used under PTZ Scan. • PTZ Move Mode: Not used under PTZ Scan • Index: Sequence Number of PTZ Scan.(Up to 16 scans) • Start: Scan area setup. • End: Scan area setup. • Mode: OFF: Scan disable. On(Normal): Move from start point to end point in panning only.
ENVI Series: VT-PTZ220N 4. Position the camera to the Stop location using the navigation buttons then press “End” button. 5. Select the scan Mode: On(Normal) / On(Diagonal) 6. Select the scan Speed 1~8 8 being fastest 7. Select the scan Direction. 8. Select the Swap Position. 9. Select the Dwelling time. 10. Click the “Apply” button to store scan. 11. Select the Scan numberin theindex. 12. Select the mode “On”. 13. Click the “Run” button to test 14.2.3.
ENVI Series: VT-PTZ220N 14.2.4. PTZ Tour With the PTZ Tour you can combine different camera functions previously configured, such as Patterns,Presets, Scans and Tours. 8 programmable tours are available each tour can consist of up to 8 functions (Preset, Pattern, Scan or other Tours). When using a Tour within a Tour any Tour that is in the 2nd Tour will be ignored.
ENVI Series: VT-PTZ220N 14.3. Camera & Motion This menu is used to set up the selection of video format, data added to video data, encoding speed, audio control, image resolution, video quality, motion detection, etc. Click Camera & Motion on Device Configuration menu. The configuration menu will be displayed, and it may be different between VITEKcameras. • • M-JPEG: This format requires much higher network bandwidth than H.264 compression.
ENVI Series: VT-PTZ220N quality can be relatively low. With VITEKCameras, you can set the number of P-frames in the video which is independent still images between I-frames. Note: For Dual Stream products, most of the parameters are dependent on primary stream value. You can configure the video data format and other information to be contained in it. • • • • • • • Video with Flexible Extra System data: If Enabled, video data will contain UART sensor data from COM port..
ENVI Series: VT-PTZ220N Frame Rate: For Primary Stream, this is the number of frames compressed in every second. You can control the network traffic with this parameter. For Secondary Stream, it can be set to a manner of 1/2, 1/4, 1/8... of the primary stream. • Image Size: Select the resolution of each channel’s video • Encoding Standard: Select the compression method of each video, either M-JPEG or H.264 format. It is not allowed to set both channels to M-JPEG. Below is the table of images sizes.
ENVI Series: VT-PTZ220N Rate Control Mode Rate Control Mode:VBR (Variable Bit Rate) Video frames are encoded with selected image quality and GOP. Encoded frames have different data size from each other. H.264 Rate Control Mode: CBR (Constant Bit Rate) Video frames are encoded with selected image quality and GOP.Encoded frames have the same data size as other frames. Due to the constant bit rate, ithas better stable transmission performance.
ENVI Series: VT-PTZ220N • • • • Focus Mode:Manual, Auto or One-Push (Default is Auto) Focus Sensitivity: Low, Normal (Default is Normal) Focus Limit: used with Manual Focus ( Default is 32cm) White Balance Mode: Auto, indoor, outdoor, ATW, Manual. In manual mode you can adjust the “Red” and “Blue” Gain (Default is Auto) • Exposure Mode: Auto, Manual, Iris, Shutter, Bright. In Manual mode the Iris, Gain and Shutter can be adjusted. In Iris mode the Iris can be adjusted.
ENVI Series: VT-PTZ220N • • • • • Exposure Slow Shutter: Turn On/Off Slow Shutter Exposure Day & Night: Auto, B/W, Color. In “Auto” Day time will be Color and Night time will be Black & White. In “B/W” camera will stay in Black & White. In “Color” camera stays Color Exposure Bright Offset: -7~+7. Brightness of the image -7 being darker and +7 being brighter. (Default is 0) Exposure Back Light: On/Off. Turn Backlight control on or off. (Default is Off) Exposure WDR Mode: On/OFF.
ENVI Series: VT-PTZ220N After all the settingsare done, click Apply button to save it. If Default button is clicked, all the fields return back to original value. 14.4. DI (Sensor Input) / DO (Alarm Output) Select DI/DO from Device Configuration menu to name and configure Sensor Input and Alarm Output. After configuring, select DI Status/DO Control on Device Configuration menu to manually control DO (Alarm Output) and check status of DI (Sensor Input).
ENVI Series: VT-PTZ220N 15. Advanced Configuration There are two types of advanced service, one is Buffered Service and the other is Periodic Service. In Buffering Service, a series of images are continuouslybeing stored in a buffer memory of thecamera/server for a certain period of time. When the camera/server is triggered by an event or schedule, the images or alarm statusjust before and after the event/schedule are reported to you by email or buffered FTP services.
ENVI Series: VT-PTZ220N 15.1. Advanced Services Pre-Alarm buffer size and buffering speed can be defined here. • Pre-Alarm Buffer Size: You can set the buffer size which will store the images before event. The unit is in frame, and each channel can be set with different values. The total number of frames for Pre-Alarm Buffer and Post-Alarm Buffer is limited to 10 frames. • Pre-Alarm Speed: You can set the buffering speed. If it’s set to Fastest, the server will store images as fast as it can.
ENVI Series: VT-PTZ220N 15.1.1. E-mail Service Configuration Email configuration is set up here for Alarm in case any event occurs. Item Description Camera 1~2 Select a channel to be configured for email notification Service Select Enable in order to use this service SMTP server address Enter SMTP server’s address for sending email.
ENVI Series: VT-PTZ220N E-mail Service Setup for Each Channel For each channel, the following items can be configured for email service: Condition, Post-Alarm Buffer Size, and Post-Alarm speed. The content of text message and display style of DI value can be configured as well. Item Condition 1 ~ Condition 3 Pre-Alarm Buffer Size Description Select a condition for Email service to be activated. The Buffer size assigned for Pre-Alarm.
ENVI Series: VT-PTZ220N After finishing setup, click Save button to apply. If you don’t want to change, click Back button. Condition, Schedule & Event Configuration If you click on a Condition link, the Advanced Service windows is displayed as shown below. Alarm Service is activated only when the conditions in Advanced Services are met. Item Description Service This shows what service this condition is for.
ENVI Series: VT-PTZ220N 15.1.2. FTP (Buffered) Service Configuration Item Description Camera 1 - Camera 2 Select which channel to set up for FTP (Buffered). Service Server Address Base Directory Name Base File Name Select Enable to use the FTP (Buffered) service. Otherwise select Disable. FTP Server Address. The directory in FTP server where the data will be uploaded. (You should make the directory in the FTP server before using the service.
ENVI Series: VT-PTZ220N User ID Password FTP Control Port Date Description Mode Connection Mode Enter a User ID to log in to FTP server. Enter the Password for the user ID to log in to FTP server Port number for FTP server (Normally 21 is used) Select Date Display Style:American, European or ISO Standard Select connection mode for FTP server If Directory Name is checked, new directory is created with server Server Name name. If File Name is checked, new file is created with server name.
ENVI Series: VT-PTZ220N Item Description Condition 1 ~ Condition 3 Select a condition for FTP (Buffered) service to be activated. Up to 3 conditions can be set. Pre-Alarm Buffer Size The Buffer size assigned for Pre-Alarm. Check Video buffer Click this link to go to Advanced Services for video buffer setup. Pre-Alarm Images The number of image frames to store before Alarm. Post-Alarm Images The number of image frames to store after Alarm.
ENVI Series: VT-PTZ220N Item Description Camera 1 - Camera 2 Select which channel to set up for FTP (Periodic) service Select Enable to use the FTP (Periodic) service. Otherwise select Disable. Service Server Address FTP Server Address. Base Directory Name The directory in FTP server where the data will be uploaded. (You should make the directory in the FTP server before using the service.) Base File Name The base file name of the data to be uploaded in FTP server.
ENVI Series: VT-PTZ220N FTP (Periodic) Service Configuration for each channel Item Description Condition 1 ~ Condition 3 Select a condition for FTP (Periodic) service to be activated. Up to 3 conditions can be set respectively. FTP interval (msec) Select the speed of images to send in FTP(Periodic) service After finishing setup, click Save button to apply. If you don’t want to change, click Back button. 16.
ENVI Series: VT-PTZ220N If entire SD information is showing “-NONE-” this means SD card is not formatted, in this case click Note: Be sure to turn off the device before installing a SD card. Otherwise, the SD card may become defective. Always check the recommended type of SD card because non-conforming SD cards can cause abnormal behavior of the system.
ENVI Series: VT-PTZ220N Note: if program is terminated during the “Format” process SD Card might be damaged After formatting is completed the following screen will be displayed Click OK and you will be brought back to the “SD Status & Format screen” click on “Reboot” wait approximately 30 seconds and log back into the Admin screen.
ENVI Series: VT-PTZ220N 16.2. Recording Configuration with microSD card Each camera has 2 streams (referred as Camera 1 / Camera 2 (see image below)) which can be configured for recording options in this section. Configuration items include motion detection recording, 24-hour continuous recording, event-driven recording, etc. You can find out the list of streams (camera 1 / camera 2) with recording capability by clicking Recording Configuration on the left side of your screen.
ENVI Series: VT-PTZ220N Select Condition 1andthe following window will be display.
ENVI Series: VT-PTZ220N By clicking on Enable you will be able to select your mode (Always, Schedule only etc). in this example we will be selecting “Event Only”. Schedule Under Scheduleyou can select time and date for motion recording if left blank motion recording will be 24hrs, 7 days a week. In this example we will be leaving it blank (24/7). Event Under Event click Motion Detection (stream 1 / stream 2). Click on Save to finish. 17.
ENVI Series: VT-PTZ220N 17.1. System Log System log file provides you the information about when and who access’ the contents of VITEKCameras such as HTTP file or CGI programs. In each line, log data consists of date, time, category, IP address, user ID. 17.2. Save Configuration VITEK cameras save the configurations after every step.
ENVI Series: VT-PTZ220N 17.3. Reboot It is recommended to reboot the system after making changes to the configuration. To reboot, click Reboot on Utilities menu. A screen will display to confirm a system reboot, click ok to continue. Windows Internet Explorer will ask to close the webpage, click Yes. 17.4. Factory Default When required to restore the configuration of a Camera to factory default conditions,Network configuration is not affected by this action. Click Factory Default on Utilities menu.
ENVI Series: VT-PTZ220N 17.5. System Update ** Is Highly Recommended to Use the IP Installer Program for This Process ** Once IP devices are searched and shown on the screen as functioning successfully, you can update the firmware of them using the“IP Installer” program. To do that, first check the firmware version of the device, which you can find on the IP Installer window.
ENVI Series: VT-PTZ220N In the above picture, the firmware version of this product is 4.14-01-ds while the latest firmware version available is 4.16-B0-ds-VI as you can see at Vitek’s homepage (http://www.vitekcctv.com/Downloads.asp). If you decide to update the firmware, first create a folder on your computer for the update firmware, than download the latest firmware to that folder. Then select the IP device to be updated on IP Installer window, then click Update Firmware button from the toolbar.
ENVI Series: VT-PTZ220N Note:Do not CLOSE window until completed, to avoid permanent damage to the camera.
ENVI Series: VT-PTZ220N 18. ENVI Series Viewer 18.1. Introduction ENVI Series Viewer is an ActiveX program for Internet Explorer web browser, which enable users to control video and audiofunctions of network video devices over the TCP/IP network. ENVI Series Viewer works with EN-V-R network video software, Vitek Network Video Servers, Network Video Recorders, and Network Cameras to show real-time live video images and enables users to control audio, Relay Output, and PTZ functions.
ENVI Series: VT-PTZ220N 19. Installing and Uninstalling 19.1. Installing ENVI Series Viewer Connect to the Vitek Camera/Server using Internet Explorer, and click Live View on the main page. Then ENVI Series Viewer will be automatically downloaded and installed. If an Internet connection is not available, it's possible to manually install the program file in advance (from supplied CD) and connect to the Vitek Camera / Server later. 19.1.1.
ENVI Series: VT-PTZ220N Click the Install ActiveX Control, and the pop-up window will be displayed as above. Click the Install button. Click “YES” to allow program to run. After the installation is successfully completed, ENVI Series Viewer window will be displayed.
ENVI Series: VT-PTZ220N 19.1.2. Manual Installation When an Internet connection is not available or having some difficulties, you can manuallyinstall from the supplied CD usingENVI Series Viewer program file.Execute the downloaded file, and you will see the ENVI Series Viewer Setup Wizard window as shown below. Click the Install button to start installing. The following window will be displayed during the installation. After installation is successfully completed, the following window will be displayed.
ENVI Series: VT-PTZ220N 19.2. Uninstalling ENVI Series Viewer There are two ways to uninstall ENVI Series Viewer program from your computer. Before uninstalling, close all the Internet Explorer windows. 19.2.1. Uninstalling with Program Menu Click Uninstall and the following window will be shown. Click the Yes button. If the uninstall is successful, the following window will be displayed. Click CLOSE to finish.
ENVI Series: VT-PTZ220N 19.2.2. Uninstalling on Control Panel Click Start button on the screen, then select the Control Panel. In the Control Panel window, double-click the Add or Remove Programs icon.
ENVI Series: VT-PTZ220N You will see the Currently installed programs list. Click ENVI Series / (Smart Viewer) button, You will see the Uninstall or change a program list. Click ENVI Series / (Smart Viewer) button, and then right click Uninstall /Changebutton. Then, it will start uninstalling the program. 20.
ENVI Series: VT-PTZ220N Camera / Server using Internet Explorer and select Live View on the main menu. The appearance of ENVI Series Viewer window varies depending on what type of Vitek Server is connected (Network Video Server, Network Camera, or Network Video Recorder). • 20.1.
ENVI Series: VT-PTZ220N 20.2. Channel Control Bar Displays or hides live view video from channel 1 Displays or hides live view video from channel 2 Displays or hides live view video from ALL channels No Display 20.3. OSD Channels Buttons 20.3.1. Saving as Image File In ENVI Series Viewer, Live video currently displayed can be captured and saved as an image file either in JPEG or BMP format. Select the live view video you want saved, and click Snapshot button on OSD Channel Buttons.
ENVI Series: VT-PTZ220N 20.3.2. Saving as Video File In ENVI Series Viewer, Live video currently displayed can be captured and recorded as a video file in AVI format. Select a live view you want to save, and click RecAvi button on OSD ChannelButtons. Clicking it again will stop recording. Max duration is 10 minutes and recording will be stopped after 10 min if left un-clicked.
ENVI Series: VT-PTZ220N can be recorded to the microSD card by clicking this button. The recorded video can be viewed by Instant Playback feature of OSD Channel Buttons or by running ENVI Series Player program. To finish, click the icon again. Max duration is 1 minute and recording will be stopped after 1 minute. 20.3.4. Instant Playback For network cameras with local storage (microSD), Instant Playback is supported. Clicking the Instant Playback button from the OSD menu will open the window below.
ENVI Series: VT-PTZ220N Set the beginning of video data. Instant playback will scan 1 min after this. Se the playback speed. Begin searching data Playback Reverse playback. 1 frame playback 1 frame reverse playback Pause Stop 20.4. Extended Features When you click the right mouse button on the Live View Window, a pop-up menu will appear for extended features as shown below. 20.4.1. Pausing Live Video Click the Pause button to stop and resume live view video. 20.4.2.
ENVI Series: VT-PTZ220N 20.4.3. Flip Control Flip Control: The horizontal view of the image can be changed using the (mirror) function. The vertical view of the image can be changed using the (flip) function.
ENVI Series: VT-PTZ220N 21. EN-V-R: Introduction This User's manual explains how to set up EN-V-R software in your PC. EN-V-R is the integrated system software for video security applications, which runs on Microsoft’s Windows-based computers. Some of major features of EN-V-Rare listed below. Provides main features of Liveview, Playback, Record, Backup Event, motion, scheduled recording & conditional playback Motion-JPEG, MPEG-4, H.
ENVI Series: VT-PTZ220N 22. Requirements for Installation 22.1. EN-V-R Versions EN-V-R is supplied to customers in different versions for each appropriate application. Users will need to choose the right versions for their needs.
ENVI Series: VT-PTZ220N Note: Above PC requirements are based on running EN-V-R program only. If other software needs to run along with EN-V-R at the same time, you may need additional performance level for your PC. It is recommended to check actual performance and disk capacity before selecting a PC for EN-V-R. 23. Installing EN-V-R After downloading EN-V-R, double click EN-V-R Setup icon to start installation.The following window will be displayed on the screen.
ENVI Series: VT-PTZ220N but if you want to change it to another location, click Browse button to choose a proper path. Now click Install button. You will see the progress of copying install files to the hard drive as shown below, once is completed click on NEXT. Click Finish to complete the Installation. After installing EN-V-R programfor the first time, it needs to be configured before use, so it automatically executes the configuration program, which is called EN-V-R Configurator.
ENVI Series: VT-PTZ220N Enter the proper Admin Password. The default password is root. The following screen will be displayed, click OK to continue. Now you will see EN-V-R Configurator window on the screen. To use EN-V-R Configurator program, refer toSection26.Starting EN-V-R Configuratoron page 103. 24. Uninstalling EN-V-R 24.1. Closing Active EN-V-R If you need to uninstall EN-V-R, first you need to make sure EN-V-R program is not running on your computer by checking the system icon.
ENVI Series: VT-PTZ220N If EN-V-R is not running, you can go ahead to the next section of uninstalling the program. If EN-V-R is active, place the mouse pointer on the EN-V-R icon, and click the right mouse button. You’ll see the popup menu. Select Exit. Then the EN-V-R icon disappears, and you know that EN-V-R is no longer running on your computer. Now you’re ready to start uninstalling. 24.2. Executing Uninstaller To start uninstalling, click Start >All Programs >Vitek>EN-V-R>Uninstall.
ENVI Series: VT-PTZ220N After all the install files are deleted, the following window will be displayed. Click OK button on the following window to complete the uninstalling. 25. Components of EN-V-R Program EN-V-R consists of three programs, (EN-V-R Service, EN-V-R Configurator, and EN-V-R Controller ). 25.1. EN-V-R Configurator EN-V-R Configurator is used to set up various parameters and conditions of EN-V-R Service. Users can register, modify, and delete IP devices and users with this program.
ENVI Series: VT-PTZ220N 25.4. EN-V-R System Tray Menu After you finish installing EN-V-R, you will find the EN-V-R icon on the system tray, which is located right, bottom part of the Windows desktop. Move the cursor over the icon, and right click. The following pop-up menu will show. You can open EN-VR Configurator or EN-V-R Controller program from this menu, or you can go to the Home page of the ENV-R program for live view or playback. 26.
ENVI Series: VT-PTZ220N You may encounter the security window as below. Click Yes button to continue. Once EN-V-R program starts, a log-in window will be displayed as below. Type in the proper admin password and click the OK button. The default admin / password is root. Now EN-V-R Configurator window will be displayed.
ENVI Series: VT-PTZ220N 27. Quick Start Guide EN-V-R is full-functioning Network Video Recorder software that runs on your PC. When started for the first time after EN-V-R is installed, there is no IP devices connected. To add a camera to the EN-V-R you must register the camera first. Then EN-V-R knows what IP devices they are, how to connect to them, and how to use them. That way, you will be able to control EN-V-R for recording, live viewing, etc. 27.1.
ENVI Series: VT-PTZ220N G Close Button 27.2. Click this button to exit EN-V-R Configurator program. Searching for IP Devices Click the first button on the Main Toolbar. You are now given a choice to register the IP devices by “search and register or manually”. To make it easy, choose Search and register IP-Device in this stage, and click Next button. On the following window,click Scan button.
ENVI Series: VT-PTZ220N The searching for IP devices is started. As the detected IP devices are being listed. Wait until searching is finished. If you click Cancel button in the middle of searching, the EN-V-R will retain only the IP devices found until that moment. 27.3. Registering IP Devices After scanning is finished, you have a list of IP devices found on your network. Next step is registering them.
ENVI Series: VT-PTZ220N The next window shows up and it’s for entering the network parameters and camera resolutions of the IP device you’ve chosen. You may need to enter the Login ID and Password here. Click Save to finish registering it.
ENVI Series: VT-PTZ220N Click Apply after registering one or more IP devices (cameras).The image below represents the configurator with multiple IP devices registered. After clicking Apply, the program will ask you to confirm it.
ENVI Series: VT-PTZ220N EN-V-R service is being stopped momentarily, and then it will start running again. 27.4. Viewing Live Video Once the network and cameras are set up, it is necessary to check if EN-V-R is functioning by viewing the live video from those devices. To view the EN-V-R home page, click the Go NVR Home button on the main toolbar. Below is an image of the EN-V-R home page.
ENVI Series: VT-PTZ220N In some cases there is no response from the web browser, you may need to install the ActiveX manually by clickingManualDownload. When you see the following security warning, click Install. 27.5. Recording Video The essential feature of EN-V-R is recording the video from IP devices. Before starting the recording, it is required to prepare the hard drive of your PC where EN-V-R program is running. Click Disk Quota on the Menu tree.
ENVI Series: VT-PTZ220N You are able to change the setting by highlighting the drive then clicking the first icon of the sub-menu Toolbar. Use HDD (to use this HDD for recording) Possible Maximum Quota (the available of free space on your HDD) Possible Minimum Quota (the minimum amount required) Set Quota (desired amount of HDD to be use for recording) To set up the recording feature, select an IP device from the Menu tree on the left pane. The device information will be shown on the right pane.
ENVI Series: VT-PTZ220N Now you will see Configure Recording Condition window as below. The recording feature is already enabled and recording conditions are configured in default settings.
ENVI Series: VT-PTZ220N detected. ClickOK to use this Recording Conditioned. To change recording condition high light camera 1 under condition list (A) Select the type of Recording under Condition Mode (B) If schedule recording is enabled, the schedule section will be available to configure (C) If Event is selected the event section will be available to configure (D) After conditions are selected click Apply to condition(E) After apply to condition click Apply to camera(F) Click OK when done.
ENVI Series: VT-PTZ220N Move the cursor over the icon, and right click. The following pop-up menu will show. You can open EN-VR Configurator or EN-V-R Controller program from this menu, or you can go to the Home page of the ENV-R program for live view or playback. You can find out from this window that the service is running at that moment. If not, click Start Service button to run.
ENVI Series: VT-PTZ220N 28. ENVI Smart Player 28.1. Introduction Smart Player is and ActiveX program for Internet Explorer Web browser, which enables users to search and play back recorded video in Network Video Servers and other devices with built-in recording capabilities. The Searching and playback of video is refined by condition, schedule, and event.
ENVI Series: VT-PTZ220N 29. Installing and Uninstalling 29.1. Installing Smart Player Connect to the Vitek Camera / Server / NVR on Internet Explorer, and click Player on the main page. If you're using Windows XP Service Pack 2 or later, it may asked you to install ActiveX click the massage bar than click on the Install ActiveX control… After the installation is successfully completed, Smart Player window will be displayed. 29.1.1.
ENVI Series: VT-PTZ220N The following window will appear. Click Next. The following window will be displayed. Click Install After installation is successfully completed, the following window will be displayed. Click Finish.
ENVI Series: VT-PTZ220N 29.2. Uninstalling Smart Player Before uninstalling, close all the Internet Explorer windows. 29.2.1. Uninstalling on Program Menu Click Uninstall and the following window will be shown. Click the Yes button. Live View & Play Back To live view and play back your cameras, go to Start menu, All Programs, Vitek Folder, Click on Smart NVR Controller, as shown below.
ENVI Series: VT-PTZ220N Look for icon on right side of taskbar as shown below (windows XP and windows 8 might show it different). Right click icon. The following window will display. Click on Open Smart NVR Controller. Click on Start Service to run the program.
ENVI Series: VT-PTZ220N Click on Go Home to view Smart Player Home Page Click on Live View The following screen will be display were you can configure your live view. Server Control Bar Allows you to view cameras / servers that are registered in the system.
ENVI Series: VT-PTZ220N Group Control Bar In order to view video, cameras must be assigned to a group, in this section you create groups with cameras you want to view. Create Group In order to create a group in Group Control Bar, right click on Group, another window will appear then select New.
ENVI Series: VT-PTZ220N The following window will be displayed. Type in the group name, check “Circulation” to allow sequencing, input dwell time for “Circulation” and click OK. A new group with the assigned name will be created as shown below. To add cameras to the new group, drag from server control bar and drop on newly created group. You can create multiple groups and add multiple cameras in each group. PTZ control Bar In this section you will be able to control PTZ’s connected to the system.
ENVI Series: VT-PTZ220N Audio Control Bar Controls Speaker and Mic volume. When audio is available click on Connect and adjust speaker and mic levels, when done click Disconnect. Full/Normal Screen Select full screen as seen below, to return to normal press Escon your keyboard.
ENVI Series: VT-PTZ220N Group Circulation Start sequencing between groups.
ENVI Series: VT-PTZ220N Layout settings You can change the screen layout between 1,2,4, etc. Image in Original Size This allows for digital zoom.
ENVI Series: VT-PTZ220N Draw Image by Maintaining Aspect Ratio Maintains the aspect ratio of the camera Draw Image by Filling the Screen 127
ENVI Series: VT-PTZ220N Enhanced Draw Mode On/Off. Enhance image for a better reproduction.
ENVI Series: VT-PTZ220N About Smart Viewer You can see the status of the Smart Viewer 30.
ENVI Series: VT-PTZ220N 30.1. Main Window View Note:The appearance of Smart Player window may vary depending on version and type of Vitek device you’re using. This user’s manual is based on general display screen. Server Control BarA Allows you to view cameras / servers that are registered in the system.
ENVI Series: VT-PTZ220N Group Control BarB You can compose a new group by dragging&dropping servers, modules, and cameras into a group.Grouping provides search function of recorded video from cameras. Playback Control Users can use this bar for functions such as forward/reverse play, previous Bar C frame, next frame, pause, stop, playback speed. Control Tool BarD Time Line Control BarE Display screenF 30.2. Users can change search modebetween calendar, condition, and data.
ENVI Series: VT-PTZ220N The following window will be displayed. Type in the group name and click OK. A new group with the assigned name will be created as shown below. To add a camera to the new group, drag and drop from the server tree to the newly created group.
ENVI Series: VT-PTZ220N 31. Searching Video Make sure you have recorded video on the calendar (recorded video shows in red). There are three choices in searching recorded video - Day Search, Condition Search, and Data Search. Make sure that Camera / Server Connection and Creating Group have been performed before you search recorded video. 31.1. Searching Video To search and playback video, Smart Player requires one or more groups to exist.
ENVI Series: VT-PTZ220N 31.2.1. Search Mode By clicking a date in red on the calendar, the time frame recorded is shown. 31.2.2. GO to Time Position To go to specific time click on “Go to time position” than input time and click search. 31.3. Condition Search Mode In this mode, you can search for video on the basis of combination of 3 different conditions, which are Time, Motion, and Sensor.
ENVI Series: VT-PTZ220N video will start playing back right after searching is completed. 31.3.1. Advanced Search Mode In Advance Search Mode you can select which conditions to search from (Time, Event, etc) First, select Time checkbox, and choose the desired time frame (Start date and time ~ End date and time), and then click Add Condition button to add to Search Condition. Now select Event checkbox, and choose Camera 1 from Motion, and then click Add Condition button to add to Search Condition.
ENVI Series: VT-PTZ220N Now that all the conditions have been configured, click Search button to start searching. Any video data which meets at least one of the conditions in Search Condition list will be shown as the results. 32.
ENVI Series: VT-PTZ220N Back to Previous Frame Go to Next Frame Playback Speed Control Player Path Control (only for condition search mode) 33. Extra Features 33.1. Window Control Users canopen or close control windows. 33.2. Recording Period You can view the starting and ending date of a recorded channel. Record time is displayed as shown below.
ENVI Series: VT-PTZ220N 33.3. Backup There are two backup formats IDX and AVI. .IDX Default video file format used by Vitek .AVI Video file format supported by Microsoft Windows When the Backup button is clicked, the following window is displayed as below. Select Camera Backup Period Check the camera to backup. For AVI backup, only one camera is permitted. For FJP, IDX, multiple backup is allowed. Select the time frame (Start date and time ~ End date and time) to backup.
ENVI Series: VT-PTZ220N After searching is finished, backup operation will start. When backup is completed, the following window will appear. Click OK button. Note: For AVI file backup, only one camera is allowed. For IDX backup, multiple cameras are allowed. 33.4. Snapshot Choose the camera currently being played or paused, click Snapshot button. Then a snapshot file will be saved in a designated path.
ENVI Series: VT-PTZ220N The below picture is a result of snapshot from the above window. 33.5. Print Choose the camera currently being played or paused, then click Print button. Then the image of the selected camera will be sent to your default printer. 33.6. Ratio Display You have three options to view videos, which are Original, Ratio, and Stretch.
ENVI Series: VT-PTZ220N 141
ENVI Series: VT-PTZ220N 34. EN-V-R Configuration A 34.1. System, Network Configuration General system and network properties of EN-V-R program can be set up in this section. To start, select System, Network Configuration from the menu list. Items Descriptions System Name Setting Enter the system's name. Set up Admin password Modify the password for Admin. Access Control Configure the access privileges of users. HTTP Port Assign Assign an HTTP Port for EN-V-R Service.
ENVI Series: VT-PTZ220N Items Descriptions System name Type in a System name. OK Click this button to apply the entered System Name. Cancel Click this button to discard the configured System name. 34.1.2. System, Network Configuration - Admin password To assign Password for the admin, click System, Network Configuration on the menu tree. Click configure admin password Items Descriptions Current password Enter the Current password. New password Enter a new password to use.
ENVI Series: VT-PTZ220N Items Descriptions Full Access Set Full Access for the user. Anyone can connect to the EN-V-R without authentication, and be allowed live view, audio, PTZ, playback. Limited Access Set Limited Access for the user. Only the users with proper permission to the camera can access it. OK Click this button to apply the change. Cancel Click this button to discard the change. 34.1.4.
ENVI Series: VT-PTZ220N Configure IP-CCTV-DNS Items Descriptions Service Set to use IP CCT DNS or not. DNS Server IP Vitek IP CCTV DNS address already entered. Go Server Directs to Vitek IP CCTV DNS server MAC MAC address of EN-V-R already entered Product Key Product Key of EN-V-R already entered External Port Enter an external HTTP Port to use for IP CCTV DNS service.
ENVI Series: VT-PTZ220N on the NEXT button as shown below. Fill out the requested information as shown below and click on Apply. The following screen will confirm that your Membership has been completed successfully, that click OK.
ENVI Series: VT-PTZ220N You will be brought back to the main page of the IPCCTVDNS website; in this case you need to Login with the information previously created. To register your first product, click on Product Registrationas shown below. Enter the requested information (The name of your camera, the Mac Address and product Key) as shown below. Note that the Mac Address and the product Key will be available under the Network Configuration>> IP-CCTV DNS setupin thecamera menu. Please see image below.
ENVI Series: VT-PTZ220N A window will pop up confirming that your product has been registered successfully, click on OK. You will be directed to the Product List page where you will be able to see your recent camera registration. By clicking the Detail Information tab you will be allow edit DDNS Host Name Click Edit to change the DDNS Host Name.
ENVI Series: VT-PTZ220N Type in desired host name than click Apply. A window will pop up asking if you really want to apply the new configurations, to continue click OK. A window will pop up confirming that the product information has been modified successfully, click OK.
ENVI Series: VT-PTZ220N Your camera with the new DDNS Host name will be displayed. Your camera is now registered and ready for use.
ENVI Series: VT-PTZ220N 36. IP-Device Registration You will see how to manage IP devices in this section, which includes registering, modifying, and deleting IP devices. To start managing IP devices, select IP-Device, Camera Management from the menu list. 36.1. Items Descriptions A IP-Device Manual Registration Register IP-Devices manually by users. B IP-Device Automatic Registration Scan and register IP-Devices automatically by the program.
ENVI Series: VT-PTZ220N A Item Description IP-Device ID Select the IP-Device ID to register. Select the Vendor name of the IP-Device to register. Click the pull-down list, and choose a proper vendor name from the list. B Vendor C Model Select the total number of channels (streams) the IP device has. Click the pull-down list, and choose proper one from the list.
ENVI Series: VT-PTZ220N D Name Type in the name of the IP-Device. E IP Address Type in the IP Address to use with the IP-Device. IPCCTVDNS or URL addresses are also supported. (If Input IP Address Range box is checked, then the starting address of the range will be selected.) F Input IP Address Range Enter the last IP address of the range. G Getting Information from IP-Device Check this box if the information from IP-Device needs to be acquired. H VS Module ID Select the VS Module ID.
ENVI Series: VT-PTZ220N Items Descriptions A IP-Device list This list shows the IP devices found during the scan process. If you need to select multiple IP devices at the same time, drag your mouse over the devices or keep pressing CTRL or SHIFT key while clicking the IP devices. B Clear Clear the scanned IP Devices from the list. C Scan Start scanning for IP Devices on the network. D Go Home Go to the home page of the IP device selected from the list.
ENVI Series: VT-PTZ220N Items Descriptions A Resolution Description Descriptions of the image resolution modes in the IP-Device list.(R1, R2, R3, R4, R5, R6, R7, R8, R9, R10) B PTZ Install Description Descriptions of the PTZ numbers in the IP-Device list. (P1, P2, P3, P4) C IP-Device list IP-Device list to select from. D Apply to All Click this button to copy the information of a selected IP-Device to all other devices.(Only Model, Login ID, and Login Password will be copied.
ENVI Series: VT-PTZ220N Items Descriptions A IP-Device ID IP-Device ID is displayed. (not allowed to modify) B Vendor Select the Vendor of the device. C Model Select how many channels the device support. D Name Change the Name as required. E IP Address Enter the IP Address to use with the selected device. F Input IP Address Range (not allowed to modify) G Getting Information from IP-Device (not allowed to modify) H VS Module ID Select the VS Module ID.
ENVI Series: VT-PTZ220N Q 36.3. Cancel Click this button to discard the changed values. IP-DeviceDeletion To delete a registered IP-Device, click IP-Device, Camera Management on the menu tree in the left pane. Then select an IP device to be deleted from the list. Click Remove IP-Device registration 36.4. IP-DeviceHomepage To go to the home page of an IP-Device, click the IP-Device, Camera Management on the menu tree. Then select the IP device. Click Go to IP-Device homepage 36.5.
ENVI Series: VT-PTZ220N A Camera Information Configure Information of the selected camera. B Resolution and Quality Choose the resolution and quality of cameras. C Recording Conditions Set up recording conditions. D Alarm and Map service settings Configure Alarm and Map service functions. 36.5.1. Configure Camera Name and Information From the configuration list, select a camera to be assigned with a name.
ENVI Series: VT-PTZ220N The below image will be display, enter name (F), then click Apply to camera(H), then OK. Items Descriptions A,B,C,D Camera Selection Select one or more cameras for name assignment by clicking buttons. E Unselect All Clear the device list which shows the selected cameras. F Name Type in a camera name. G Clear Clear the camera name field. H Apply to Camera Apply the changed camera name to the system. I OK Click this button to confirm the change and close the window.
ENVI Series: VT-PTZ220N Items Descriptions A,B,C,D Camera Selection Select one or more cameras by clicking buttons. E Unselect All Clear the device list which shows the selected cameras. F Resolution Select the video resolution. G Quality Select the video quality. H Apply to Camera Apply the selected video resolution and quality to the system. I Go Home Go to the homepage of the product. J Close Close and exit the window. 36.5.3.
ENVI Series: VT-PTZ220N The below image is where you adjust the recording parameters. Item Description A,B,C,D Camera Selection Select one or more cameras by clicking buttons. E Unselect All Clear the device list which shows the selected cameras. F Condition List Define the condition for recording to be started. G Condition to use Decide whether to use the defined condition or not. H Condition Mode Select the condition mode for recording. I Scheduling Set up the schedule for recording.
ENVI Series: VT-PTZ220N N Pre Alarm Images Select pre-alarm images. O Pre Alarm Speed Select pre-alarm speed. P Post Alarm Images Select post-alarm images. Q Post Alarm Speed Select post-alarm speed R OK Click this button to confirm the change and exit the window. S Cancel Click this button to cancel the all the changed made in this session. To setup recording, first click camera under Condition list(F).
ENVI Series: VT-PTZ220N 36.5.4.
ENVI Series: VT-PTZ220N A,B,C,D Camera Selection Select one or more cameras by clicking buttons. E Unselect All Clear the device list which shows the selected cameras. F Alarm Service Setup Put check marks on alarm types to use. G Event Service Setup Put check marks on event types to use. H Apply to Camera Click this button to apply the changes to the camera. I OK Click this button to confirm the change and exit the window.
ENVI Series: VT-PTZ220N 36.6.1. User Registration To register a new user, click the 1'st button on the tool bar in the sub-menu toolbar. Items Descriptions A User ID Enter a new User ID to register. B Password Enter the Password for the new user. C Confirm password Enter the same Password for confirmation. D Name Enter the name of the new user to be registered. E System resource access permission Choose the level of permission for System resource access.
ENVI Series: VT-PTZ220N To modify a user's information, select the users name than click the second button on the submenutoolbar. The User Registration window will come up on the screen, make the necessary changes and click OK . 36.6.3. UserDeletion To delete an existing user, select the user name than click Remove Registered user account, another screen will pop up confirming to proceed with deletion, click OK to proceed . 36.7. Disk Setup 36.7.1.
ENVI Series: VT-PTZ220N device list. The following window will be displayed. Item Description A Use HDD Decide whether this HDD is to be used. B Possible Maximum Quota Display Possible maximum quota on this HDD. C Possible Minimum Quota Display Possible minimum quota on this HDD. D Set Quota Enter the desired size of disk quota for recording. E OK Click to apply the configured disk quota. F Cancel Click to cancel the disk quota configuration.
ENVI Series: VT-PTZ220N Items Descriptions A Disk Circulation Setup Configure disk circulation type. B Disk Usage Report Setup Configure email address for reporting. Click the Disk Circulation in the list. The following window will be displayed. Item Description A Use circulation Select this if disk circulation will be used. B Not use circulation Select this if disk circulation will not be used. C Use expired duration Decide whether the expiration will be used for recording.
ENVI Series: VT-PTZ220N Item Description A Use to report HDD usage Choose whether to Enable or Disable the report service. B Report HDD space When disk circulation is not used, select the HDD size when it will be reported by email. C Periodic report Define when Periodic reports will be sent. D OK Click to apply the Email report settings. E Cancel Click to cancel Email report configuration. 36.8. Utilities Select Utilities from the menu tree.
ENVI Series: VT-PTZ220N email account for mail service Item Description A Service Decide whether to report HDD usage by email or not. B SMTP server Enter the address of SMTP server for sending email. C Authentication Decide whether to use Authentication. D Email user id Enter the sender's id for email account. E Email user password Enter the password of the sender’s email account. F Sender email Enter the Sender's email address.
ENVI Series: VT-PTZ220N Items Descriptions A About program Show the information about the EN-V-R running. B System Resource Displays the PC's system resource information. C OK Click this button to close the Window. 37. Using EN-V-R Controller To open EN-V-R controller,click Start >All Programs>Vitek>SMART NVR Controller. Smart NRV controller will be on the lower right part of the system tray. Then right click the icon a subwindow will display, click on Open Smart NVR Controller.
ENVI Series: VT-PTZ220N Items Descriptions A Current Service State Shows whether EN-V-R Service is running or stopped. B Start Service Click this button to start EN-V-R Service when it’s stopped. C Stop Service Click this button to stop EN-V-R Service when it’s running. D Refresh Refresh the Screen. E Go Home Go to the EN-V-R’s built-in webpage. F Close Close the EN-V-R Controller window. 38. Connecting to EN-V-R 38.1.
ENVI Series: VT-PTZ220N After you successfully connecting to the EN-V-R homepage, you will see the following window. Items Descriptions A Home Go to EN-V-R’s homepage. B Live View Click this button to execute Live View program. You can use various features such as live view, audio transmission, PTZ control, unconditional recording, etc. C Player Click this button to search, record, and back up the video data sent from IP devices registered in EN-V-R. 38.2.
ENVI Series: VT-PTZ220N In case that the HTTP port for EN-V-R is not 80 (default), the port number should be entered together with the IP address.
VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. Digital recording and storage products are also warranted for 3 years except for the hard drives which carry their own independent factory warranty from the hard drive manufacturer.
Class A Digital Device (industrial & commercial environment) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
