Specifications

ENVI Series: VT-PTZ220N
114
detected. ClickOK to use this Recording Conditioned.
To change recording condition high light camera 1 under condition list (A)
Select the type of Recording under Condition Mode (B)
If schedule recording is enabled, the schedule section will be available to configure (C)
If Event is selected the event section will be available to configure (D)
After conditions are selected click Apply to condition(E)
After apply to condition click Apply to camera(F)
Click OK when done.
Now that the configuration is done, you need to start the EN-V-R service program. Select Start > All
Programs >Vitek>smart NVR>Smart NVR controller.
You will find the EN-V-R icon on the system tray, which is located right, bottom part of the Windows
desktop.